1. Microtek_ScanWizard_255us.exe Driver
2. SCANMGR.INI File Contents

SCANMGR.INI Driver File Contents (Microtek_ScanWizard_255us.exe)

;OmniPage Pro, which is a TWAIN-compliant application,
;controls its TWAIN data source (scanner) according to 
;parameters stored in this file.

;If you are having problems with your TWAIN scanner, 
;it is possible that your scanner driver is not fully 
;compliant with the provisions of the TWAIN specification. 
;Some parameter in this Scanmgr.ini file may be inappropriate 
;or missing. If a section exists in this file that pertains
;exactly to your scanner, examine the section based on the 
;example and provisions below. 

;You may need to add a new section to this file similar to 
;the example. In any case, edit or add entries as shown below.
;so that your section of statements directly relate to your 
;scanner and its parameters.

;EXAMPLE:

;[Name of your TWAIN data source]
;SHOW_UI=0   
;INVERT=1
;LA_INVERT=1
;THRESHOLD=0
;AUTO_BRI=1
;DISPLAY_PROGRESS=1

;(Remember: REMOVE the semicolons from your statement lines.)

;Where:
;SHOW_UI=0 indicates whether or not the TWAIN Data 
;Source user interface will be displayed.
;0 means no, 1 means yes.
;
;INVERT=1 indicates whether or not a gray image will be
;inverted. If your scans appear as black pages
;with white text, and INVERT=1, change INVERT=0.
;Or, if INVERT=0, make INVERT=1.
;
;LA_INVERT=0 indicates whether the binary image (line art)
;will be inverted or not. If your scans appear as black
;pages with white text, and LA_INVERT=1, change LA_INVERT=0.
;Or, if LA_INVERT=0, make LA_INVERT=1.
;
;THRESHOLD=1 indicates how to get brightness information 
;from data source. If you cannot set brightness for 
;line art image and THRESHOLD=1, change THRESHOLD=0.
;Or, if THRESHOLD=0, make THRESHOLD=1.
;
;AUTO_BRI=1 determines whether or not grayscale scanning
;can be used with OmniPage. If you have a 256-grayscale
;scanner, this should be set at 1. If you have problems,
;change it to 0.
;
;DISPLAY_PROGRESS=1 Use this if your data source does
;not have a progress indicator and SHOW_UI=0.

;IMPORTANT - In your TWAIN scan module dialog box, 
;you MUST use also these settings:

;RESOLUTION: 300dpi
;Scaling: 100%
;Scan Frame: 8.5" x 11" or 8.5" x 14"
;Scan Mode: Grayscale or Line Art

;Note: If you use Grayscale, choose 3D OCR or AnyPage in the
;OmniPage Scanner settings panel. If you use Line Art, choose
;Manual brightness in the OmniPage Scanner settings panel.


[ScanMgr]
ProductName=Caere Application
MicrotekPort=0200
MicrotekSpeed=1
ModelName=
nBrightness=1
nContrast=1
Setup=Y
TwainDS=Microtek ScanWizard
CurrentScannerId=54

[Art-Scan for TWAIN]
SHOW_UI=0
INVERT=0
LA_INVERT=1
AUTO_BRI=1
DISPLAY_PROGRESS=0

[Avision TWAIN Source]
COMMENT=Avision
SHOW_UI=1
INVERT=1
AUTO_BRI=1

[Canon IX-3010]
COMMENT=CANONIX3010,01111, OK
SHOW_UI=0
INVERT=1
LA_INVERT=1
THRESHOLD=1
AUTO_BRI=1

[Canon IX-4015]
COMMENT=CANONIX4015,01101, OK
SHOW_UI=0
INVERT=1
LA_INVERT=1
THRESHOLD=1
AUTO_BRI=1

[DeskScan II]
COMMENT=ScanJet_Plus_IIp_IIc_IIcx,01001, OK
SHOW_UI=0
INVERT=1
LA_INVERT=0
THRESHOLD=0
AUTO_BRI=1

[DeskScan II 2.3]
COMMENT=ScanJet_Plus_IIp_IIc_IIcx,01001, OK
SHOW_UI=0
INVERT=0
LA_INVERT=0
THRESHOLD=0
AUTO_BRI=1

[DeskScan II 2.3.1]
COMMENT=ScanJet_Plus_IIp_IIc_IIcx,01001, OK
SHOW_UI=0
INVERT=0
LA_INVERT=0
THRESHOLD=0
AUTO_BRI=1

[EPSON Scanners]
COMMENT=
SHOW_UI=0
INVERT=1
LA_INVERT=0
THRESHOLD=0
AUTO_BRI=1

[FAXsynergy TWAIN Source]
COMMENT=
SHOW_UI=1
INVERT=1
LA_INVERT=1
THRESHOLD=0
AUTO_BRI=1

[FotoLook V1.25 Twain]
COMMENT=Agfa StudioSCAN, 111
SHOW_UI=1
INVERT=1
AUTO_BRI=1

[HP OfficeJet Series 300]
SHOW_UI=1
INVERT=0
LA_INVERT=1
THRESHOLD=0
AUTO_BRI=1

[Kofax Device]
COMMENT=FUJITSU,010
SHOW_UI=0
INVERT=1
AUTO_BRI=0

[Microtek Image Scanner]
COMMENT=ScanMakerIIg/ScanMakerIIsp,00011, OK
SHOW_UI=0
INVERT=1
LA_INVERT=0
THRESHOLD=1
AUTO_BRI=1
DISPLAY_PROGRESS=0

[Microtek PageWiz]
SHOW_UI=1
INVERT=1
LA_INVERT=1
THRESHOLD=1
AUTO_BRI=1
DISPLAY_PROGRESS=1

[Microtek ScanWizard]
SHOW_UI=0
INVERT=1
LA_INVERT=0
THRESHOLD=1
AUTO_BRI=1
DISPLAY_PROGRESS=0

[Microtek ScanWizard (32bit)]
SHOW_UI=0   
INVERT=1
LA_INVERT=0
THRESHOLD=1
AUTO_BRI=1
DISPLAY_PROGRESS=0

[Nikon Scan]
SHOW_UI=1
INVERT=1
LA_INVERT=1
THRESHOLD=1
AUTO_BRI=0
DISPLAY_PROGRESS=1

[NISCAN Page]
COMMENT=NISCAN,111
SHOW_UI=1
INVERT=1
AUTO_BRI=1

[Pentax IQ Scan]
COMMENT=PENTAX_IQ_SCAN, 011
SHOW_UI=0
INVERT=1
AUTO_BRI=1

[RELISYS SCSI-2 Scanner]
COMMENT=Relisys, 01101, OK
SHOW_UI=0
INVERT=1
LA_INVERT=1
THRESHOLD=0
AUTO_BRI=1

[ScanPartner Jr/10/10C]
COMMENT=
SHOW_UI=1
INVERT=1
LA_INVERT=1
THRESHOLD=1
AUTO_BRI=1

[SheetFed Scanner V2.01]
COMMENT=Logitech SP_COLOR_6000, 00001, OK
SHOW_UI=0
INVERT=0
LA_INVERT=0
THRESHOLD=0
AUTO_BRI=1
DISPLAY_PROGRESS=0

[UMAX Scanner V1.04]
SHOW_UI=0
INVERT=0
AUTO_BRI=1

[VistaScan V1.11]
COMMENT=UMAX Vista S-6
SHOW_UI=0   
INVERT=1
LA_INVERT=1
THRESHOLD=1
AUTO_BRI=1

[COMMENT]
COMMENT=THIS_COMMENT_IS_FOR_LOGITECH_ONLY
DPI=0 - 200 dpi, 1 - 300 dpi, 2 - 400 dpi
DOCTYPE=0 - black & white, 1 - gray scale
ORIENT=2 - Auto, 3 - portrait, 4 - landscape(L to R), 5 - landscape(R to L)

[Logitech ScanMan]
SHOW_UI=1
INVERT=1
AUTO_BRI=1
DPI=1
DOCTYPE=0
ORIENT=4

[Logitech PowerPage]
SHOW_UI=0
INVERT=1
LA_INVERT=1
THRESHOLD=0
AUTO_BRI=1
DPI=1
DOCTYPE=0
ORIENT=3