README.TXT Driver File Contents (

                         940-OD.COM Ver 1.20

                    Winbond Electronics Corporation



  1. 940-OD.COM is a ODI workstation driver. It is for the DOS environment only
     and therefore defaults to the 802.3 frame type.

  2. If there is only one 940 card, the driver will automatically read IOBASE
     and IRQ from PCI Configuration Space.

  3. If there is more than 940 card, user must indicate a specified IOBASE in
     NET.CFG file.

  4. If you want to login to Netware server, you need five files:



   1. The running sequence is:

        940-OD.COM   --> Winbond DOS ODI driver

   2. Modify the NET.CFG file to set

      (a) 'Ethernet Frame' type if you wish; the valid NET.CFG files are shown

                Link driver 940-od
                frame ethernet_802.2
                frame ethernet_802.3
                frame ethernet_ii
                frame ethernet_snap

      (b) 'IOBASE' if there is more than one 940 card, the valid NET.CFG is as
          shown below:

                Link driver 940-od
                port d000

       For more information on NET.CFG parameters, see "NetWare Workstation for
       DOS" or "ODI for DOS User's Guide".


  Available command line options:

  940-OD   -Installs the LAN driver
  940-OD U -Unloads resident LAN driver from memory
  940-OD ? -Displays this help screen

Trouble Shooting

  1. Message: 'FATAL: Winbond NIC Command port failed to respond.
               FATAL: Board failed to initialize correctly.'
     Solution: Make sure
               a. your W89C940 PCI card is plugged into the system, and
               b. if there is more than one 940 card in your system, you must
                  use the I/O port to select a W89C940 card. This is done by
                  adding the following statements to the NET.CFG file:

                        Link Driver 940-OD
                            port d000      ---> selected W89C940 card.

  2. Message: 'A File Server could not be found.'
     Solution: Make sure
               a. your W89C940 PCI card is connected to the cable,
               b. the Novell OS is active in this network,
               c. the frame type between client(your system) and server(Novell
                  OS) is the same.

Histories of Release:

    ***) 1.10,  11-06-1995
         First release.

    ***) 1.20,  02-26-1996

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.06