============================================================= How to install LAN Server DOS LAN Service with W940ND.DOS ============================================================= * Please follow the procedure below to setup LAN Server DOS LAN Service: 1. When installation program asks for a network drivers, select "Network card not shown in below". 2. Insert Winbond Drivers diskette into drive A: 3. Type "A:\NDIS2\IBMSVR.DOS" and press <Enter> 4. Follow the direction to finish the setup procedure. * Trouble Shooting 1. Message: "!! No W89C940 card detected" Solution: Make sure that your W89C940 card is plugged steadily. 2. Message: "!! No free W89C940 card" Solution: One driver for one card. Make sure that there is less drivers loaded than card plugged. If option keyword SelectedID is assigned, make sure that all node ID's assigned is correct or let drivers without SelectedID be loaded after those with SelectedID. 3. Message: "!! Cannot open PROTMAN$" Solution: Make sure that PROTMAN.DOS is loaded before W940ND.DOS, and it is initialized successfully. If the syntax of PROTOCOL.INI is incorrect, PROTMAN$ cannot be loaded. 4. Message: "!! Bad Parameter in PROTOCOL.INI" Solution: The parameter is invalid. For example, the correct SelectedID format need two single quotation signs ('). If you fail to do it, this message will be shown. 5. Message: "!! Unknown Keyword in PROTOCOL.INI" Solution: W940ND only accepts two keywords: DRIVERNAME and SELECTED. Other keywords are unknown. Notice that, PCI bus need not assign IOBASE and INTERRUPT. 6. Message: "!! Specified SELECTEDID is absent or bound" Solution: You specified a node ID at keyword SelectedID, and this ID is bound by another drivers or can not be found. Make sure that the ID is correct. * Version Release 1.04 11-15-1995 This is the first revision of W940ND.DOS 2.0.1 MAC Driver. 2.00 02-05-1996 Reconstruct the source to support OS/2. 2.01 02-26-1996 Print the correct error message when my DriverName not in PROTOCOL.INI. 2.02 07-19-1996 Minor modification for MAKEFILE. 2.10 05-28-1997 Modify this driver for supporting more than one 940 cards in the OS/2 environment.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.