; OEMSETUP.INF FOR NT3.5 [Identification] OptionType = NetAdapter [PlatformsSupported] ISA EISA "Jazz-Internal Bus" [Options] RTL8139 [FileConstants] UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "Realtek" ProductMajorVersion = "1" ProductMinorVersion = "1" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "RTL8139" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\RTL8139.sys" NetRuleSoftwareType = "RTL8139Sys ndisDriver RTL8139Driver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """RTL8139Sys"" yes no container" NetRuleSoftwareClass = {"RTL8139Driver basic"} NetRuleSoftwareBindable = {"RTL8139Driver RTL8139Adapter non exclusive 100"} ProductHardwareName = "RTL8139" NetRuleHardwareType = "RTL8139 RTL8139Adapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"RTL8139Adapter basic"} ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + set ActivateDetection = FALSE Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set CommonStatus = STATUS_REBOOT set ActivateDetection = TRUE set StartLabel = configureadapter Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE set ActivateDetection = TRUE endif Set DetectedCard = FALSE Set EtherID = "" Ifstr(i) $(ActivateDetection) != TRUE Goto skipdetection Endif skipdetection =+ set from = $(fatal) set to = $(fatal) goto $(StartLabel) installadapter = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) != "OK" set CommonStatus = STATUS_USERCANCEL goto end endif set OldVersionExisted = $(TRUE) endif endif Ifstr(i) $(DetectedCard) != TRUE Goto adaptersetup Endif StartWait Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD) EndWait Ifstr(i) $($R0) != STATUS_SUCCESSFUL Goto adaptersetup Endif Set DetectedParams = $($R1) Shell $(ParamInf) Param_SetDefaults $(DetectedParams) goto adapteroptions configureadapter = + Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE goto fatalregistry Endif Endif Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Goto fatalregistry endif set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) Ifstr(i) $(ValueName) == "EtherID" set EtherID = $(ValueData) else-ifstr(i) $(ValueName) == "BusType" set BusInterfaceType = $(ValueData) else-ifstr(i) $(ValueName) == "BusNumber" set BusNumber = $(ValueData) endif EndForListDo adaptersetup =+ Shell $(ParamInf) Param_ParameterConfidence Ifstr(i) $($R0) != STATUS_SUCCESSFUL Goto adapteroptions Endif Ifstr(i) $(DetectedCard) == TRUE Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM Goto adapterverify Endif Endif goto adapteroptions adapteroptions = + set from = adapteroptions ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" ifstr(i) $(!AutoNetInterfaceType) != "" set BusInterfaceType = $(!AutoNetInterfaceType) else set BusInterfaceType = 1 endif ifstr(i) $(!AutoNetBusNumber) != "" set BusNumber = $(!AutoNetBusNumber) else set BusNumber = 0 endif goto adapterverify endif set SpeedValue1 = "auto" set speed = "auto" ;; set EnumSpeed = {"auto", "100" ,"10"} ; set EnumSpeed = {"Auto-Detect"} ; read-syms SpeedDlg$(!STF_LANGUAGE) ; ui start "InputDlg" ; ifstr(i) $(DLGEVENT) == "CONTINUE" ; set speed = $(ListItemsOut) ; ui pop 1 ; else-ifstr(i) $(DLGEVENT) == "EXIT" ; ui pop 1 ; goto end ; else ; ui pop 1 ; goto end ; endif read-syms FileDependentDlg$(!STF_LANGUAGE) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" set EtherID = $(EditTextOut) ui pop 1 else-ifstr(i) $(DLGEVENT) == "EXIT" ui pop 1 else ui pop 1 goto end endif ifstr(i) $(!STF_NCDETINFO) == {} Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set BusInterfaceType = $($R1) set BusNumber = $($R2) else set BusInterfaceType = *($(!STF_NCDETINFO),5) set BusNumber = *($(!STF_NCDETINFO),6) endif adapterverify =+ Ifstr(i) $(DetectedCard) != TRUE Goto skipoptions Endif Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD) Ifstr(i) $($R0) == STATUS_SUCCESSFUL Goto skipoptions Endif Set from = adapteroptions Set to = skipoptions Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto Warning skipoptions =+ ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait ifint $(OldVersionExisted) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait goto fatalregistry endif endif Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) goto writeparameters writeparameters = + set NewValueList = {{EtherID,$(NoTitle),$(!REG_VT_SZ),$(EtherID)},+ {Speed,$(NoTitle),$(!REG_VT_SZ),$(speed)},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters) endif CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndWait goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end UpgradeSoftware = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} CloseRegKey $(KeyProduct) else goto fatalregistry endif goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set CommonStatus = STATUS_USERCANCEL Set Severity = STATUS goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif ifstr(i) $(DoConfig) == "YES" endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers exit [Source Media Descriptions] 1 = "SURECOM EP-320X-R 100/10M PCI Adapter Driver Disk" , TAGFILE = DISK1 [Signature] FileType = MICROSOFT_FILE [GetSignature] read-syms Signature return $(FileType) [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 1, oemsetup.inf, SIZE=50000, RENAME=$(!UG_Filename) [Files-RTL8139] 1,RTL8139.SYS , SIZE=50000 [LanguagesSupported] ENG [OptionsTextENG] RTL8139 = "SURECOM EP-320X-R 100/10M PCI Adapter" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" FunctionTitle = "SURECOM EP-320X-R 100/10M PCI Adapter Setup" ProductSoftwareDescription = "SURECOM EP-320X-R 100/10M PCI Adapter Driver" ProductHardwareRTL8139Description = "SURECOM EP-320X-R 100/10M PCI Adapter" ProductSoftwareTitle = "SURECOM EP-320X-R 100/10M PCI Adapter Driver" ProductHardwareRTL8139Title = "SURECOM EP-320X-R 100/10M PCI Adapter" ShellCodeErrorTitle = "Error: "$(FunctionTitle) ShellCodeErrorText = "Shell Code Error." [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [FileDependentDlgENG] Caption = "Input Ethernet ID" DlgText = "Please input adapter's Ethernet ID: "$(!LF)+ "For example:"$(!LF)+ " Ethernet ID: 0000210000AD"$(!LF)$(!LF)+ "(This option is only required when you have more than "+ "one SURECOM EP-320X-R PCI Fast Ethernet adapters on this computer. "+ "Select SKIP if only one adapter is installed on "+ "this computer.)" Edit1Label = "&Ethernet ID:" Continue = "&OK" Exit = "&Skip" Help = "&Help" DlgType = "Edit" DlgTemplate = "QUERY_COMPUTER_NAME" EditTextLim = 17 EditTextIn = $(EtherID) EditFocus = "ALL" ;[SpeedDlgENG] ; Caption = "Line Speed" ;; DlgText = " The SURECOM EP-320X-R PCI Fast Ethernet Adapter "+ ;; "support the following link-speed: "$(!LF)+ ;; "-- (1) 10 Mbps "$(!LF)+ ;; "-- (2) 100 Mbps "$(!LF)+ ;; "-- (3) Auto Detect "$(!LF)+ ;; "Please select one: " ; Continue = "OK" ; Cancel = "Cancel" ; Help = "&Help" ; DlgType = List ; DlgTemplate = "OEMSINGLESEL" ; HelpContext = $(!IDH_DB_OEMSINGLESEL_INS) ; ListItemsIn = $(EnumSpeed) ; ListItemsOut = $(SpeedValue1)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.