1. level_one.zip Driver
2. NW312.TXT File Contents

NW312.TXT Driver File Contents (level_one.zip)

   Server Driver for NetWare 3.12

   Introduction:
   -------------
   This document describes the procedure to install the NetWare v3.12
   server driver for LevelOne 10/100Mbps Fast Ethernet Adapter.

   Location of Driver:     \NWSERVER\312\FNC107.LAN


   Installation Procedure:
   -----------------------
      Before you start with the installation process, make sure that
      the Novell NetWare v3.12 server is properly installed.
      Similarly, your adapter should also be properly installed in your
      server.

        1. Make a sub-directory NLMS.OLD under <SRVPATH> directory which
           includes SERVER.EXE.

           Ex. <SRVPATH> = SRV312.
               >MD \SRV312\NLMS.OLD

        2. Save NBI.NLM, MSM.NLM and ETHERTSM.NLM to NLMS.OLD
           sub-directory.

        3. Insert driver diskette into floppy disk drive.

        4. Copy all provided NLM and LAN files into your dos directory
           which includes SERVER.EXE, and rename NBI31X.NLM and MSM31X.NLM
           :

           Ex. >COPY A:\NWSERVER\312\NBI31X.NLM C:\SRV312\NBI.NLM
               >COPY A:\NWSERVER\312\MSM31X.NLM C:\SRV312\MSM.NLM
               >COPY A:\NWSERVER\312\ETHERTSM.NLM C:\SRV312
               >COPY A:\NWSERVER\312\FNC107.LAN C:\SRV312

        5. Start the NetWare Server.

           > CD \SRV312
           > SERVER

        6. From the Novell Server side, execute "LOAD INSTALL".  Type:

              LOAD INSTALL

           Select <System Options>
           Select <Edit AUTOEXEC.NCF File>

        7. Add the following commands into the server's AUTOEXEC.NCF file.

           Search Add C:\SRV312

           LOAD NBI.NLM
           LOAD MSM.NLM
           LOAD ETHERTSM.NLM

           LOAD FNC107 SLOT=1 FRAME=Ethernet_802.3 NAME=FNC107_1_E83
           BIND IPX FNC107_1_E83 NET=1111

           LOAD FNC107 SLOT=1 FRAME=Ethernet_802.2 NAME=FNC107_1_E82
           BIND IPX FNC107_1_E82 NET=1113

           LOAD FNC107 SLOT=1 FRAME=Ethernet_SNAP  NAME=FNC107_1_ESP
           BIND IPX FNC107_1_ESP NET=1115

           LOAD FNC107 SLOT=1 FRAME=Ethernet_II    NAME=FNC107_1_EII
           BIND IPX FNC107_1_EII NET=1117

           Note: The SLOT parameter should be set as the number of the PCI slot
                 on which FNC107 resides.

        8. Restart the server again.


   NOTES:
   ------

      1. Installing Multiple LAN Adapters:

         The keyword "SLOT" is provided for multiple LAN adapters in a
         single server by the driver FNC107.LAN. So, add "SLOT" in LOAD
         commands. For example:

         LOAD FNC107 SLOT=1 FRAME=Ethernet_802.2 NAME=LAN_A
         BIND IPX TO LAN_A NET=111
         LOAD FNC107 SLOT=2 FRAME=Ethernet_802.2 NAME=LAN_B
         BIND IPX TO LAN_B NET=222

      2. Use keyword AUTO, 100FULL, 100HALF, 10FULL, 10HALF to specify the
         media type of the FNC107.

         For example:

            ; Specify AUTO-DETECT
            LOAD FNC107 AUTO FRAME=Ethernet_802.2 NAME=LAN_A
            BIND IPX TO LAN_A NET=111

            ; Specify 100Mbps, Half-duplex
            LOAD FNC107 100HALF FRAME=Ethernet_802.2 NAME=LAN_A
            BIND IPX TO LAN_A NET=111

         The default media type is auto-detect(i.e. none of these keywords
         is specified).

      3. Installing One LAN adapter with Multiple Frame Types:

         When binding multiple frame types to one adapter, enter a LOAD
         and BIND statement for each frame type. Each LOAD statement will
         use a different network number on the bind statement.
         It is required to supply a name on each load line in order to avoid
         being prompted for which board to bind IPX to. If you do not
         have the name option in the AUTOEXEC.NCF, it will not execute
         completely without user intervention.

         Example:

           LOAD FNC107 FRAME=ETHERNET_802.3 NAME=FNC107_1_E83
           BIND IPX TO FNC107_1_E83 NET=11111

           LOAD FNC107 FRAME=ETHERNET_802.2 NAME=FNC107_1_E82
           BIND IPX TO FNC107_1_E82 NET=33333

           LOAD FNC107 FRAME=ETHERNET_SNAP  NAME=FNC107_1_ESP
           BIND IPX TO FNC107_1_ESP NET=55555

           LOAD FNC107 FRAME=ETHERNET_II    NAME=FNC107_1_EII
           BIND IPX TO FNC107_1_EII NET=77777

   If problems occur during the binding process, your screen will prompt
   you with error messages. Please refer to your NetWare 386 manual for
   details on these messages.

                                                        -- End --