Install LAN server 4.0
Driver Installation - for LAN Server 4.0
(1) Introduction:
This document describes the procedure to install NDIS driver on DOS
LAN Requester and OS/2 LAN server 4.0 for Fast Ethernet PCI adapter.
Location of Driver: \LANSRV\DOS\MXNICF.DOS (for DOS LAN Services)
(2) Installing Driver Procedure on DOS LAN Requester:
Before you start with the installation process, make sure that
DOS LAN Services is properly installed. Similarly, your adapter
should also be properly installed in your client PC.
1. Copy MXNICF.DOS from your Driver diskette (A:\LANSRV\DOS) to DOS
LAN Services subdirectory C:\NET.
2. Under DOS LAN Requester subdirectory C:\NET, run INSTALL.
3. The screen display some description. If it's correct, move
highlight to "The listed options are correct" item ,then press
ENTER.
4. Move highlight to "Network Card", then press ENTER.
5. Select "Change driver for network card." item, then press ENTER.
6. Select "Network card not shown in list below..", then press ENTER.
7. Insert the Fast Ethernet PCI adapter driver diskette in floppy A,
and specify the pathname A:\LANSRV\DOS,then press ENTER.
8. MX98713 driver is now installed on your computer, reboot your
computer.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.