1. ob2000.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (ob2000.zip)

                                                                      
                                                                      
HP OMNIBOOK 2000/5700 NOTEBOOK PC - OS/2 WARP OR WARP CONNECT, INSTALLING
SCSI DRIVERS


INTRODUCTION
  
  When using the HP OmniBook Notebook PC with a docking system, use the
  following instructions to install SCSI support.  This procedure is not
  necessary if OS/2 was installed from a SCSI CD-ROM drive, because the
  SCSI drivers are already installed.
  

REQUIREMENTS
  
  *    HP OmniBook 2000/5700 Notebook PC with OS/2 Warp or Warp Connect 
       installed. 
  
  *    HP OmniBook 2000/5700 SCSI drivers.  To create a "SCSI Drivers"
       floppy disk, copy C:\OMNIBOOK\DRIVERS\OS2\SCSI\*.* to A:.  (To
       install correctly, the drivers must be in the root directory of
       the floppy disk.)  Or get the drivers from the HP OmniBook 
       2000/5700 Recovery CD in the \OMNIBOOK\DRIVERS\OS2\SCSI
       subdirectory. 

PROCEDURE
  
  1.   Insert the floppy disk with the SCSI drivers in drive A.
  
  2.   Open the OS/2 System folder, select the System Setup icon, and
       double-click Device Driver Install.
  
  3.   When prompted, type the path to the HP OmniBook Notebook PC
       SCSI drivers (such as A:\) and choose OK.
  
  4.   Select "AMD SCSI" and click OK.
  
  5.   Remove the floppy disk, then shut down OS/2 and reboot.

______________________________________________________________________
                  Copyright  Hewlett-Packard Co. 1997
       This information is subject to change without notice and
                 is provided "as is" with no warranty.
          Hewlett-Packard shall not be liable for any direct,
        indirect, special, incidental or consequential damages
             in connection with the use of this material.

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.