*******************************************************************************
** How to use VUP98.EXE **
** 1998-07-09 **
*******************************************************************************
"VUP98.EXE" is a flasher utility software for TOSHIBA CD/DVD-ROM ATAPI drives.
-------------------------------------------------------------------------------
[Supported Drives (almost TOSHIBA ATAPI drives)]
XM-6102D, -6202B, -6202S, -6202BH, -6302B
XM-1602B, -1702B, -1802B
SD-M1002B, -M1102B, -M1202B
SD-C2002B, -C2102B
-------------------------------------------------------------------------------
[Necessities]
PC, TOSHIBA CD/DVD-ROM drive, ******.hex (appropriate F/W file)
-------------------------------------------------------------------------------
[Procedure]
1- Make sure that TOSHIBA CD/DVD-ROM drive is connected.
2- Run PC by MS-DOS mode.
3- Copy "VUP98.EXE" & "******.HEX" to some directory in HDD.
4- Type "VUP98 ******.HEX" then hit RETURN-KEY.
5- Program finishes with the message of "Comparison : GOOD"
-------------------------------------------------------------------------------
[Command line options]
-h[elp] : Display HELP Message
-v[ersion] : Display VUP Version
-irq (0 to F) : Set IRQ level by hexadecimal number.
-prt (Port No.) : Set I/O port address by hexadecimal number.
***** Specify both options (-irq and -prt) if use *****
-a[uto] : Auto mode. (Non-interactive)
*The utility does not prompt to input "Y/N".
-c[ontinue] : Flash continuously. (if many drives are connected)
*Finishing flash procedure, it returns to the initial
stage automatically.
(0 to 7) : Designate ID. (0:Primary/Master -- 7:Quatenary/Slave)
(HEX file name) : Omitting the file name, the default name of "ROM.Hex"
is used.
-------------------------------------------------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.