WIN98(5).TXT Driver File Contents (DR_SMC1211TX_all.zip)

<=================================================================>
<                         SMC Networks, Inc.                      >
<             SMC EZ Card 10/100 FAST ETHERNET ADAPTER            >
<               NDIS4 MINIPORT DRIVER INSTALLATION                >
<                                                                 >
<               Copyright (C) 2001 SMC Networks, Inc.             >
<                       All Rights Reserved.                      >
<=================================================================>

The driver (SMC1211.SYS) contained in the root directory is for
the following SMC PCI Ethernet adapter:

    SMC EZ Card 10/100 (SMC1211 Series)

The driver (SMC1211.SYS) conforms to the Network Driver Interface
Specification (NDIS) 4.0, and is used with Microsoft Windows 95 OSR2,
Windows 98.

  Contents:
  ---------

   (A) Installing the NDIS4 Miniport driver on Microsoft Windows 98
   (B) Configuring the NDIS4 Miniport driver on Microsoft Windows 98
   (C) Installing NDIS3 Miniport driver in Microsoft Windows 95 OSR2
   (D) Configuring NDIS3 Miniport driver in Microsoft Windows 95 OSR2

(A) Installing the NDIS4 Miniport driver on Microsoft Windows 98
=================================================================

    1. Plug the SMC1211 series adapter into one of the Master PCI
       slots of your PCI platform.
    2. Turn the power ON, then boot into Windows 98.
    3. When Windows 98 prompts with "PCI Ethernet Controller" in the
       "New Hardware Found" dialog box, click the "Next" button.
    4. Select "Search for the best driver for your device (Recommended)"
       from the "Add New Hardware Wizard" dialog box, then click the
       "Next" button.
    5. Insert the SMC1211 series Driver Diskette into your floppy drive.
    6. Select "Specify a location" and type Path "A:\" in the
       "Add New Hardware Wizard" dialog box, then click the "Next" button.
    7. Click the "Next" button in the "Add New Hardware Wizard" dialog box.
    8. Windows 98 will prompt with "SMC EZ Card 10/100 (SMC1211 Series)"
       in the "Add New Hardware Wizard" dialog box.
    9. Click the "Next" button in the "Add New Hardware Wizard" dialog box, then
       Windows 98 will copy the driver (SMC1211.SYS) from A:\
       to the C:\WINDOWS\SYSTEM directory and the NETSMC11.INF file from A:\
       to the C:\WINDOWS\INF directory.
   10. When Windows prompts with "SMC EZ Card 10/100 (SMC1211 Series)"
       in the "Add New Hardware Wizard" dialog box, click the "Finish" button.
   11. Remove the SMC1211 series Driver Diskette from your floppy drive.
   12. Restart your computer to initialize the network function.

       NOTICE!! C:\WINDOWS is the directory where your Windows 98
                O.S. is located.


(B) Configuring the NDIS4 Miniport driver on Microsoft Windows 98
====================================================================

    1. Click the "My Computer" icon in the Main Program Group.
    2. Click the "Control Panel" icon in the My Computer window.
    3. Click the "Network" icon in the Control Panel window.
    4. Select the "SMC EZ Card 10/100 (SMC1211 Series)" item
       from the "Network" dialog box, then click the "Properties" button.
    5. Click the "Advanced" button in the "SMC EZ Card 10/100 (SMC1211 Series)
       Properties" dialog box.
    6. Select the Line Speed value (Auto,100full,100half,10full,10half)
       for the "Value" item, then click the OK button in the "SMC EZ
       Card 10/100 (SMC1211 Series) Properties" dialog box.
    7. Click the OK button in the "Network" dialog box.
    8. Restart your computer to implement the new configuration.

(C) Installing NDIS4 Miniport driver in Microsoft Windows 95 OSR2
=================================================================

    1. Plug the SMC1211 series adapter into one of the Master PCI
       slots of your PCI platform.
    2. Turn the power ON then boot into Windows 95.
    3. Windows 95 will prompt with "PCI Ethernet Controller" in
       the "New Hardware Found" dialog box and the "Update Device Driver
       Wizard" dialog box.
    4. Insert the SMC1211 series Driver Diskette in your floppy drive.
    5. Click the "Next >" button in "Update Device Driver Wizard"
       dialog box.
    6. Windows 95 will prompt with "SMC EZ Card 10/100 (SMC1211 Series)."
       in the "Update Device Driver Wizard" dialog box.
    7. Click the "Finish" button in the "Update Device Driver Wizard"
       dialog box.
    8. Enter the full pathname A:\ of the SMC1211.INF file, then
       click the OK button in the "Copying Files..." dialog box.
    9. Follow the screen's prompt to insert the "Windows 95 CD-ROM"
       and click the OK button in the "Insert Disk" dialog box.
   10. Otherwise enter the full pathname of the "Windows 95 CD-ROM"
       installation files in "Copying Files..." dialog box,
       and then click the OK button.
   11. Windows 95 will copy the driver (SMC1211.SYS) from A:\
       to C:\WINDOWS\SYSTEM directory and the SMC1211.INF file from
       A:\ to C:\WINDOWS\INF directory.
   12. Remove the SMC1211 series Driver Diskette from your floppy drive.
   13. Restart your computer to initialize the network function.

       NOTICE!! C:\WINDOWS is the directory where your Windows 95 OSR2
                O.S. is located.



(C) Configuring NDIS4 Miniport driver in Microsoft Windows 95 OSR2
====================================================================

    1. Click the "My Computer" icon in the Main Program Group.
    2. Click the "Control Panel" icon in the My Computer window.
    3. Click the "Network" icon in the Control Panel window.
    4. Select the "SMC EZ Card 10/100 (SMC1211 Series)." item
       from the "Network" dialog box, and then click the "Properties"
       button.
    5. Click the "Advanced" button in the "SMC EZ Card 10/100 (SMC1211 Series)"
       dialog box.
    6. Select the Line Speed value (Auto,100full,100half,10full,10half
        from the "Value" item, and then click the OK button in the
       "SMC EZ Card 10/100 (SMC1211 Series) Properties" dialog box.
    7. Click the OK button in the "Network" dialog box.
    8. Restart your computer to initialize the new configuration.



Trademarks:
Microsoft Windows 98 is a trademark of Microsoft Corporation.

===End of File===

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.66