<=================================================================> < SMC Networks, Inc. > < SMC EZ Card 10/100 (SMC1211TX) > < NETWARE ODI DRIVER INSTALLATION > < > < Copyright (C) 1998 SMC Networks, Inc. > < All Rights Reserved. > <=================================================================> Contents of this document ======================== A. DOS ODI WorkStation Driver Installation B. Installation Notes A. NetWare DOS ODI Workstation Driver Installation ================================================== This section describes the procedure to install the NetWare workstation driver for your adapter. Requirements: ------------- SMC1211TX Driver Diskette (SMCODI.COM) Driver Location: \NETWARE\ODI\DOSODI Installation Procedure: ----------------------- Before you start with the installation process, make sure that the adapter is properly installed and configured. Also, make sure that your NetWare operating system is properly installed. 1. Run the following command in the order given below and press <Enter>: lsl smcodi ipxodi netx (or vlm) 2. You can now log onto your network. B. Installation Notes ===================== 1. Edit the NET.CFG if you want to change some parameters. For example, if you're using a NetWare 3.11 workstation and want to log onto a NetWare v4.X server. The default frame type for NetWare 3.11 is Ethernet 802.3, while that of NetWare v4.X is Ethernet 802.2. Before you can log onto a NetWare v4.X server, make sure there is a protocol binding for Ethernet 802.3 in the server's NET.CFG file. This is normally included in the [MLID] section. A sample NET.CFG file is given below: Link Driver SMC1211 FRAME Ethernet_802.2 FRAME Ethernet_802.3 FRAME Ethernet_II FRAME Ethernet_SNAP PROTOCOL IPX 0 Ethernet_802.3 : MEDIUM AUTO ;operate on auto negotiation mode ; MEDIUM 10HALF ;operate on 10M/HalfDuplex mode ; MEDIUM 10FULL ;operate on 10M/Fullduplex mode ; MEDIUM 100HALF ;operate on 100M/HalfDuplex mode ; MEDIUM 100FULL ;operate on 100M/Fullduplex mode --- All trademarks and brand names mentioned belong to their respective owners. -- THE END --Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.