; INF file for S3 display driver.
; Copyright 1999, S3 Inc.
[Version]
CATALOGFILE=S3LC2X.CAT
Class=Display
Signature="$CHICAGO$"
Provider=%Mfg%
DriverVer =05/13/1999, 6.00.00.0001
[DestinationDirs]
DefaultDestDir=11
S3-Sync.Copy=11
REFini.Copy=10
S3_INF.copy=17
GAMMAcopy.sys=11
GAMMAcopy.hlp=18
GAMMAcopy.inf=17
GAMMAcopy.win=10
REFcopy.sys=11
REFcopy.win=10
[SourceDisksNames]
51="Windows 95/98 S3 Driver Disk",,1
[SourceDisksFiles]
s3lc2x.drv=51
s3lc2x.vxd=51
s3lc2x.dll=51
s3dtkw.dll=51
s3hal95.dll=51
s3kernel.vxd=51
s3lc2x.INF=51
vgartd.vxd=51
S3Gamma.dll=51
S3Gamma.cfg=51
S3Gamma.inf=51
S3gamENU.hlp=51
S3gamCHT.hlp=51
S3gamCHS.hlp=51
S3gamNLD.hlp=51
S3gamFRA.hlp=51
S3gamDEU.hlp=51
S3gamITA.hlp=51
S3gamJPN.hlp=51
S3gamKOR.hlp=51
S3gamPTB.hlp=51
S3gamESP.hlp=51
S3gamSVE.hlp=51
S3gamTHA.hlp=51
S3gamDAN.hlp=51
S3gamFIN.hlp=51
S3gamNOR.hlp=51
S3uninst.exe=51
S3_Refre.dll=51
S3_Refre.inf=51
S3Refre.cfg=51
S3refre.vxd=51
S3LC2X.CAT=51
;----------------------------------------
; Manufacturers
[Manufacturer]
"%Mfg%"=Mfg
;----------------------------------------
; Driver sections
[Mfg]
%S3Trio3D2X.DeviceDesc%= S3_10, PCI\VEN_5333&DEV_8A13&SUBSYS_8A135333
%S3Trio3D2X.DeviceDesc%= S3_10, PCI\VEN_5333&DEV_8A13
;----------------------------------------
[GammaUninstall]
DelFiles = GAMMAcopy.sys, GAMMAcopy.hlp, GAMMAcopy.win, GAMMAcopy.inf, GAMMAold.hlp
DelReg = S3Gamma.DelReg
[S3GammaNT.DelReg]
HKLM,"%CURVER%\Uninstall\S3 Gamma",,,
HKCR,"CLSID\%GAMMACLSID%",,,"S3 Gamma Property Sheet"
;; ---------- Next line to remove possible duplicate shellext ------------
HKLM,"%CURVER%\%1%\Display\shellex\PropertySheetHandlers\S3Gamma",,,
HKLM,"%CURVER%\%1%\Display\shellex\PropertySheetHandlers\S3 Gamma","",,"%GAMMACLSID%"
HKLM,"%S3GKEY%\%SCHEMES%",,,
HKLM,"%S3GKEY%",,,
HKLM,"SYSTEM\CurrentControlSet\Services\S3Inc\Device0","GammaSupportEnabled",,
[S3Gamma.DelReg]
HKLM,"%CURVER%\Uninstall\S3 Gamma",,,
HKCR,"CLSID\%GAMMACLSID%",,,"S3 Gamma Property Sheet"
;; ---------- Next line to remove possible duplicate shellext ------------
HKLM,"%CURVER%\%1%\Display\shellex\PropertySheetHandlers\S3Gamma",,,
HKLM,"%CURVER%\%1%\Display\shellex\PropertySheetHandlers\S3 Gamma","",,"%GAMMACLSID%"
HKLM,"%S3GKEY%\%SCHEMES%",,,
HKLM,"%S3GKEY%",,,
HKR,"shellex\PropertySheetHandlers\S3 Gamma","",,"%GAMMACLSID%"
[S3Gamma.AddReg]
HKLM,"%CURVER%\Uninstall\S3 Gamma",DisplayName,,"%ShortDesc%"
HKLM,"%CURVER%\Uninstall\S3 Gamma","UninstallString",,"s3uninst.exe GammaUninstall 5 s3lc2x.inf"
HKCR,"CLSID\%GAMMACLSID%",,,"S3 Gamma Property Sheet"
HKCR,"CLSID\%GAMMACLSID%\InProcServer32",,,"S3Gamma.dll"
HKCR,"CLSID\%GAMMACLSID%\InProcServer32",ThreadingModel,,"Apartment"
;; ---------- Next line to remove possible duplicate shellext ------------
HKLM,"%CURVER%\%1%\Display\shellex\PropertySheetHandlers\S3Gamma",,,
HKLM,"%CURVER%\%1%\Display\shellex\PropertySheetHandlers\S3 Gamma","",,"%GAMMACLSID%"
HKLM,"%S3GKEY%","Installed",,"1"
HKLM,"%S3GKEY%","Filename",,"S3Gamma.dll"
HKLM,"%S3GKEY%","UtilityName",,"%GAMMANAME%"
;; ------------------ The following lines are for Win98 ------------------
HKR,"shellex\PropertySheetHandlers\S3Gamma","",,
HKR,"shellex\PropertySheetHandlers\S3 Gamma","",,"%GAMMACLSID%"
[S3Ref_remove]
DelReg = S3Ref.AddReg
DelFiles=REFcopy.prog, REFcopy.hlp, REFcopy.win, REFcopy.sys, REFcopy.inf
[S3Ref.AddReg]
HKLM,Software\Microsoft\Windows\CurrentVersion\Uninstall\S3_REF,DisplayName,,"%ShortDesc1%"
HKLM,Software\Microsoft\Windows\CurrentVersion\Uninstall\S3_REF,UninstallString,,"S3uninst.exe S3Ref_remove 5 S3lc2x.inf"
;----------------------------------------------------------------------------
HKLM,SOFTWARE\S3\Refresh,,,
HKLM,SOFTWARE\S3\Refresh,ref_title,,"S3 Refresh"
HKLM,SOFTWARE\S3\Refresh,UtilityName,,"S3 Refresh"
HKLM,SOFTWARE\S3\Refresh,FileName,,"s3_refre.dll"
HKLM,SOFTWARE\S3\Refresh,Installed,,"1"
HKLM,SOFTWARE\S3\Refresh,LoadAlways,,"ON"
HKLM,SOFTWARE\S3\Refresh,WriteAllBpp,,""
HKLM,SOFTWARE\S3\Refresh,ref_640x480,1,ff,55,4b,48,3c,0
HKLM,SOFTWARE\S3\Refresh,ref_800x600,1,ff,55,4b,48,3c,38,0
HKLM,SOFTWARE\S3\Refresh,ref_1024x768,1,ff,55,4b,46,3c,38,2b,0
HKLM,SOFTWARE\S3\Refresh,ref_1280x1024,1,ff,55,4b,48,3c,38,2b,0
HKLM,SOFTWARE\S3\Refresh,ref_1600x1200,1,ff,4b,3c,2b,0
HKLM,SOFTWARE\S3\Refresh,custom,1,ff,ff,ff,ff,ff
HKLM,SOFTWARE\S3\Refresh,ref_dest_path,,"System\CurrentControlSet\Services\Class\Display"
;-----------these 3 lines below are moved to HKCR,CLSID for Windows98---------------------------
;-----------these 3 lines below are for Windows98 & windows9X---------------------------
HKCR,CLSID\{87b9bd00-c65c-11cd-a259-00dd010e8c28},"",,"S3 Property Sheet Extension for refresh rates"
HKCR,CLSID\{87b9bd00-c65c-11cd-a259-00dd010e8c28}\InProcServer32,"",,"s3_refre.dll"
HKCR,CLSID\{87b9bd00-c65c-11cd-a259-00dd010e8c28}\InProcServer32,ThreadingModel,,"Apartment"
;-------------------this old below line is for win95----------------------
HKLM,SOFTWARE\Microsoft\Windows\CurrentVersion\%1%\Display\shellex\PropertySheetHandlers\S3_REF,"",,"{87b9bd00-c65c-11cd-a259-00dd010e8c28}"
;-------------------this below line is added for win98----------------------
HKR,shellex\PropertySheetHandlers\S3_REF,"",,"{87b9bd00-c65c-11cd-a259-00dd010e8c28}"
; Install sections
[S3_10]
DelReg = S3SWITCH.AddReg,DEL_CURRENT_REG, S3Gamma.DelReg, S3Ref.AddReg
DelFiles =REFini.Copy, GAMMAcopy.sys, GAMMAcopy.hlp, GAMMAcopy.win, REFcopy.win, REFcopy.sys
CopyFiles=S3_4_CopyFiles, S3-Sync.Copy, S3_INF.copy, GAMMAcopy.sys, GAMMAcopy.hlp, GAMMAcopy.win, REFcopy.win, REFcopy.sys
AddReg=S3_10_AddReg, S3_Trio3D2X_AddReg, S3Gamma.AddReg, S3Ref.AddReg
;----------------------------------------
; Common AddReg sections
[DEL_CURRENT_REG]
HKR,,DevLoader,0,
HKR,,Ver,0,
HKR,DEFAULT,,0,
HKR,MODES,,0,
HKR,CURRENT,,0,
HKLM,Config\0001\Display\Settings,DuoView_In_8Bpp,,"ON"
HKLM,SOFTWARE\S3\SWITCH,M3_M5,,"0"
HKLM,Config\0001\Display\Settings,CommandDMA,,
HKLM,Config\0001\Display\Settings,NewAlphaBlend,,
HKLM,Config\0001\Display\Settings,AGPEnabled,,
;----------------------------------------
; Model AddReg sections
;----------------------------------------
[S3_Trio3D2X_AddReg]
HKLM,Config\0001\Display\Settings,CommandDMA,,"ON"
HKLM,Config\0001\Display\Settings,DuoView_Flip,,"ON"
HKLM,Config\0001\Display\Settings,Mode720Flg,,"ON"
HKLM,Config\0001\Display\Settings,CheckUV,,"OFF"
HKLM,System\CurrentControlSet\Services\VxD\VGARTD,StaticVxD,,"vgartd.vxd"
[S3_10_AddReg]
;----------------------------------------Trio3D/2X
HKR,,Ver,,4.0
HKR,,DevLoader,,*vdd
HKR,DEFAULT,Mode,,"8,640,480"
HKR,DEFAULT,drv,,s3lc2x.drv
HKR,DEFAULT,drv2,,s3lc2x.drv
HKR,DEFAULT,vdd,,"*vdd,*vflatd"
HKR,DEFAULT,minivdd,,s3lc2x.vxd
HKR,DEFAULT,RefreshRate,,"-1"
HKR,DEFAULT,DDC,,"1"
HKR,DEFAULT,REPOST,,"1"
HKR,"MODES\8\640,480" ,,,"60,72,75,85"
HKR,"MODES\8\800,600" ,,,"56,60,72,75,85"
HKR,"MODES\8\1024,768" ,,,"43,60,70,75,85"
HKR,"MODES\8\1152,864" ,,,"60,70,75,85"
HKR,"MODES\8\1280,1024" ,,,"43,60,75,85"
HKR,"MODES\8\1600,1200" ,,,"48,60,75,85"
HKR,"MODES\16\640,480" ,,,"60,72,75,85"
HKR,"MODES\16\800,600" ,,,"56,60,72,75,85"
HKR,"MODES\16\1024,768" ,,,"43,60,70,75,85"
HKR,"MODES\16\1152,864" ,,,"60,70,75,85"
HKR,"MODES\16\1280,1024",,,"43,60,75,85"
HKR,"MODES\16\1600,1200",,,"48,60,75,85"
HKR,"MODES\24\640,480",,,"60,72,75,85"
HKR,"MODES\24\800,600",,,"56,60,72,75,85"
HKR,"MODES\24\1024,768",,,"43,60,70,75,85"
HKR,"MODES\24\1152,864" ,,,"60,70,75,85"
HKR,"MODES\24\1280,1024",,,"43,60,75,85"
[S3_4_CopyFiles]
s3lc2x.dll
s3lc2x.vxd
s3lc2x.drv
[S3-Sync.Copy]
s3dtkw.dll
s3kernel.vxd
s3hal95.dll
vgartd.vxd
[S3_INF.copy]
s3lc2x.INF
[GAMMAcopy.sys]
S3Gamma.dll
S3uninst.exe
[GAMMAcopy.win]
S3Gamma.cfg
[GAMMAold.hlp]
S3Gamma.hlp
[GAMMAcopy.hlp]
S3gamENU.hlp
S3gamCHT.hlp
S3gamCHS.hlp
S3gamDAN.hlp
S3gamNLD.hlp
S3gamFIN.hlp
S3gamFRA.hlp
S3gamDEU.hlp
S3gamITA.hlp
S3gamJPN.hlp
S3gamKOR.hlp
S3gamNOR.hlp
S3gamPTB.hlp
S3gamESP.hlp
S3gamSVE.hlp
S3gamTHA.hlp
[REFcopy.win]
s3refre.cfg
[REFcopy.sys]
s3_refre.dll
S3refre.vxd
;----------------------------------------
; User visible strings
[Strings]
ClassName="Display"
Mfg="S3"
1 = "Controls Folder"
ShortDesc1 = "S3 Refresh"
LongDesc1 = "Installs the S3 Refresh display property sheet page"
ShortDesc = "S3 Gamma"
LongDesc = "Installs the S3 Gamma Display Property page"
S3 = "S3 Incorporated"
CURVER = "Software\Microsoft\Windows\CurrentVersion"
GAMMACLSID = "{C4FACD43-6676-11d1-AF9C-00AA00C67CA8}"
GAMMANAME = "S3 Gamma"
SCHEMES = "Schemes"
S3GKEY = "SOFTWARE\S3\S3 Gamma"
S3Trio3D2X.DeviceDesc= "S3 Inc. Trio3D/2X"
;----------------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.