1. DOMSA01.exe Driver
2. Release.txt File Contents

Release.txt Driver File Contents (DOMSA01.exe)

                          Broadcom Corporation
                          16215 Alton Parkway,
                          Irvine, CA 92619-7013
			  
                              Release Notes
                              
                 Broadcom Advanced Server Control Suite      
            (former Broadcom's Gigabit Ethernet Express View)
            
                               11/08/2000

Table of Contents
=================

  Introduction
  Limitations
  Installation
  Revision History
  
			       
Introduction
============
Broadcom Advanced Server Control Suite(BASCS) is an application that contains
a set of utilities supporting diagnostics, monitoring, and Load Balance/VLAN
configurations for B5700 network adapter.

BASCS runs under Windows NT 4.0 and Windows 2000.

Limitations
===========

The following features are not yet supported in current version
of implementation:

1. On-line Help.
2. Installation software.

Load Balance/VLAN configuration is based on version 1.1.6 of BLF release


Installation
============
Copy fad.sys to %SystemRoot%\system32\drivers directory

Copy all files in this directory to your system32 directory.

BMAPI.dll
fad.sys
mfc42.dll
MSVCRT.DLL
B57exp.cpl
cabw32.dll   /* cable diagnostic component */
patterns.dat /* cable diagnostic component */

( To verify your system32 directory, type " echo %SystemRoot%\system32 " from your command prompt).


If this is not the first time you install BASCS, you only need to copy B57exp.cpl
and BMAPI.DLL into your system32 directory.

From Control Panel (Start->Setting->Control Panel ), you should see an icon with
Broadcom Logo indicates Broadcom Gigabit. Double click the Broadcom icon to 
launch BASCS.



Revision History
================
bascs_v1.12 (11/27/00)

- Resized all screen to 640x480
- Close clearquest 679
- Restore still has problem with VLAN.

bascs_v1.11 (11/25/00)
- Fix the restore option in advanced features
- Fix clearquest 660.
- Systray is modified to display correct BASCS version.

bascs_v1.10 (11/22/00)
- Fix the following clearquest 663,449,636,640,572,592,702,664.
- Fix multiple instances of the SysTray (696).

bascs_v1.09 (11/16/00)
- Fix the version number on title bar.
- Add system tray program. Use installation program to install it.

bascs_v1.08 (11/15/00)
This release is using the bmapi.dll v1.2.3
- BASCS can be fully displayed at 640x480 resolution.
- In Load Balance team configuration page, adapter names can be fully displayed.

bascs_v1.07 (11/13/00)
This release is using the cabw32.dll V.0.03
- Fixed data error in cable pair swaps
- Fixed cable length using the Return Loss method.

bascs_v1.06 (11/12/00)
-Add Cable diagnostic components (version 0.02). This release of cable diagnostic works with short cable and data collected for pair swapping and frequency analysis are known not reliable when running with BCM5700 (B0 and A11 board).

bascs_v1.05 (11/08/00)
-Fixed bug ID 440, 552, 356, and 357.
-Help icon added for SLB config (ID 354 )


bascs_v1.04 (11/01/00)
- Updated the BASP team configuration to allow only team with SLB type has Standby member,
  and validate the changes when changing team type via node property.
- Fixed the problems of only Standby member exists without assigning Load Balance member
  within a team.
- Enhanced the data serialization and thread synchronization in Diagnostics.

 Note: For this release, make sure you are using v.0.7 of NDIS driver, most recent
       BASP driver(1.1.0), and new BCM5700 (10580-10 Rev.000 )nic card.

bascs_v1.03 (10/28/00)
-Integrated with latest BMAPI (v1.2.0) which fix the EEPROM checksum

bascs_v1.0.2 (10/23/00)
-Fixed bug ID 0215, 0224, 0294, 0118, 315, 317, 268, 276, 277, 320, and 293.

v0.10 (09/22/00)
- Initial Release.