[Vendor]
CompanyName=Cisco-Linksys, LLC.
[Product]
ConfigUtility=Wireless-G Notebook Adapter Wireless Network Monitor
ProductName=Wireless-G Notebook Adapter
AppTitleSetup=Linksys Installation Wizard
AppTitleConfig=Wireless-G Notebook Adapter Wireless Network Monitor
MsgTitle=Wireless-G Notebook Adapter Wireless Network Monitor
ShortName=WPC54Gv5
[Setup]
MsgNoInstaller=Unable to find the installer.
MsgNoAcrobatReader=Acrobat Reader is not installed. Would you like to install it now?
MsgNoAcrobatInstaller=Unable to find the Acrobat Reader setup file.
MsgNoUserGuide=Cannot open the User Guide.
MsgNonAdmin=You do not have administrator privileges, so the installation is being terminated. Ask an administrator to install this application.
MsgInstallationNotCompleted=Setup has detected that the previous installation needs to be completed. Please reboot before you re-install.
MsgNeedIE55=Internet Explorer 5.5 or higher is required for this software.
MsgPackageCorruptted=The package is corrupt; please verify.
MsgAlreadyInstalled=The wireless network monitor utility and drivers for the %s have already been installed. If you would like to uninstall these items, run the Uninstall program from the '%s' program group.
StatusWirelessMode1=Ad-Hoc
StatusWirelessMode2=Infrastructure
MsgRestart=Linksys WPC54G has been successfully installed on your system. Before you can use this program, you must restart your computer.
RestartYes=Yes, I want to restart my computer now.
RestartNo=No, I will restart my computer later.
BtnOK=OK
BtnCancel=Cancel
[Tray]
TrayTipDefault=Linksys Configuration Utility
TrayTipInactive=is inactive
TrayTipNotInstalled=is not installed
TrayTipSignal=Signal
TrayTipQuality=Quality
TrayMenu1=Open Configuration Utility
TrayMenu2=About...
TrayMenu3=Exit
[BasicSetting]
GMode1=Mixed Mode
GMode2=G-Only Mode
[Profile]
ProfileNew=Enter a name for the new profile.
ProfileSystem=This profile name is already used by the system. Enter another name.
ProfileExists=A profile with the given name already exists. Do you want to replace it?
ProfileTooLong=Profile name should have fewer than 32 characters.
ProfileCreate=Create connection profile
ProfileUpdate1=Do you want to update the profile
ProfileUpdate2=with current settings?
ProfileUpdate3=Update selected profile
ProfileDelete1=Are you sure you want to delete this profile?
ProfileDelete2=Delete selected profile
ProfileDelete3=Do you want to delete the profile?
ProfileConnect1=The profile
ProfileConnect2=is missing or corrupt
ProfileConnect3=Connect with selected profile
ProfileNetworkSetting=Network Setting
ProfileWrongIP1=A valid IP address is necessary for this field.
ProfileWrongIP2=You have entered an incorrect IP address. Please try again.
ProfileWrongIP3=IP address is necessary for IP Address and Subnet Mask field.
ProfileImport1=A profile with the name
ProfileImport2=already exists. Do you want to replace it?
ProfileImport3=Import connection profile(s)
ProfileExport1=Please select a folder to export to.
ProfileExport2=Profile
ProfileExport3=already exists. Press OK to continue or Cancel to skip.
ProfileExport4=Export connection profiles
ProfileExport5=Please give a new name to this profile
ProfileExport6=Successfully exported
ProfileExport7=profile(s)
ProfileExport8=No profile exported.
ProfileExport9=Export profile(s)
ProfileSummary1=Use DHCP
[LinkInfo]
LinkInfoInactive=Inactive
LinkInfoNotInstalled=Not installed
LinkInfoDeviceFailed=Failed to change device configuration.
LinkInfoConnecting=Connecting...
LinkInfoSettingNetwork=Setting Network...
LinkInfoNetworkMode1=B-only mode
LinkInfoNetworkMode2=G-only mode
LinkInfoNetworkMode3=Mixed mode
LinkInfoPackets=Packets
LinkInfoNA=N/A
[WEP]
WEP1=You have entered an incorrect WEP key. Please try again.
WEP2=The WEP key should have %d hexadecimal characters ('0'~'9' or 'A' ~ 'F').
WEP3=The WEP key should have %d alphanumeric characters.
WEP4=alphanumeric characters.
WEP5=Security Setting
WEP6=hexadecimal characters ('0'~'9' or 'A' ~ 'F').
WEP7=The passphrase field is empty. Please enter the passphrase.
WEP8=Disabled
WEP9=64 Bits
WEP10=128 Bits
WEP11=Open
WEP12=Shared
WEP13=Auto Switch
[SiteSurvey]
SiteSurvey1=Searching ...
[Status]
StatusConnect1=Connected
StatusConnect2=Disconnected
StatusConnect3=Authenticating
StatusConnect4=Waiting for Keys
StatusConnect5=Open Ad-Hoc
StatusConnect6=Open Unauthenticated
StatusConnect7=Funk Not Licensed.
StatusWirelessMode1=Ad-Hoc
StatusWirelessMode2=Infrastructure
StatusTxRate1=1 Mbps
StatusTxRate2=2 Mbps
StatusTxRate3=5.5 Mbps
StatusTxRate4=6 Mbps
StatusTxRate5=9 Mbps
StatusTxRate6=11 Mbps
StatusTxRate7=12 Mbps
StatusTxRate8=24 Mbps
StatusTxRate9=36 Mbps
StatusTxRate10=48 Mbps
StatusTxRate11=54 Mbps
StatusTxRate12=1 or 2 Mbps
StatusTxRate13=Auto
StatusTxRate14=SpeedBooster
StatusWEPMode1=WEP
StatusWEPMode2=Off
StatusWEPMode3=N/A
StatusWEPMode4=WPA
StatusWEPMode5=WPA+Radius
StatusWEPMode6=Unknown
StatusWEPMode7=On
StatusWEPMode8=None
StatusEnable1=Enabled
StatusEnable2=Disabled
StatusStation1=Not Available
StatusStation2=Connected
StatusStation3=Authenticated
StatusStation4=Link Synchronized
StatusStation5=Scanning ...
StatusStation6=Disconnected
StatusStation7=Checking...
StatusLinkQuality1=No Signal
StatusLinkQuality2=Poor
StatusLinkQuality3=Good
StatusLinkQuality4=Very Good
StatusLinkQuality5=Excellent
[Security]
Security1=Please enter required security information
Security2=Passphrase should have between 8 to 63 characters.
[About]
AboutTitle=About Wireless Network Monitor
AboutCopyright=Copyright (c) 2004 Cisco System, Inc. All Rights Reserved.
AboutVersion=Version
AboutDriver=Driver
AboutUtility=WLAN Monitor
AboutLibrary=Library
AboutFirmware=Firmware
About1=Unknown
About2=Cannot open Linksys website. Please check your Internet browser settings.
[Other]
EuropeOnly=(Europe Only)
MsgRunning=The application is already running.
MsgFileMiss1=Some necessary files are missing.
MsgFileMiss2=These files are used to configure your adapter, please make sure you have properly install the software.
MsgFileMiss3=If you encounter this problem again, please reinstall this software from your Linksys CD.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.