1. wpc54gv5.zip Driver
2. Language.ini File Contents

Language.ini Driver File Contents (wpc54gv5.zip)

[Vendor]
CompanyName=Cisco-Linksys, LLC.

[Product]
ConfigUtility=Wireless-G Notebook Adapter Wireless Network Monitor
ProductName=Wireless-G Notebook Adapter
AppTitleSetup=Linksys Installation Wizard
AppTitleConfig=Wireless-G Notebook Adapter Wireless Network Monitor
MsgTitle=Wireless-G Notebook Adapter Wireless Network Monitor
ShortName=WPC54Gv2

[Setup]
MsgNoInstaller=Unable to find the installer.
MsgNoAcrobatReader=Acrobat Reader is not installed. Would you like to install it now?
MsgNoAcrobatInstaller=Unable to find the Acrobat Reader setup file.
MsgNoUserGuide=Cannot open the User Guide.
MsgNonAdmin=You do not have administrator privileges, so the installation is being terminated. Ask an administrator to install this application.
MsgInstallationNotCompleted=Setup has detected that the previous installation needs to be completed. Please reboot before you re-install.
MsgNeedIE55=Internet Explorer 5.5 or higher is required for this software.
MsgPackageCorruptted=The package is corrupt; please verify.
MsgAlreadyInstalled=The wireless network monitor utility and drivers for the %s have already been installed. If you would like to uninstall these items, run the Uninstall program from the '%s' program group.
StatusWirelessMode1=Ad-Hoc
StatusWirelessMode2=Infrastructure
MsgRestart=Linksys WPC54GS has been successfully installed on your system. Before you can use this program, you must restart your computer.
RestartYes=Yes, I want to restart my computer now.
RestartNo=No, I will restart my computer later.
BtnOK=OK
BtnCancel=Cancel

[Tray]
TrayTipDefault=Linksys Configuration Utility
TrayTipInactive=is inactive
TrayTipNotInstalled=is not installed
TrayTipSignal=Signal
TrayTipQuality=Quality
TrayMenu1=Open Configuration Utility
TrayMenu2=About...
TrayMenu3=Exit

[BasicSetting]
GMode1=Mixed Mode
GMode2=G-Only Mode

[Profile]
ProfileNew=Enter a name for the new profile.
ProfileSystem=This profile name is already used by the system. Enter another name.
ProfileExists=A profile with the given name already exists. Do you want to replace it?
ProfileTooLong=Profile name should have fewer than 32 characters.
ProfileCreate=Create connection profile
ProfileUpdate1=Do you want to update the profile
ProfileUpdate2=with current settings?
ProfileUpdate3=Update selected profile
ProfileDelete1=Are you sure you want to delete this profile?
ProfileDelete2=Delete selected profile
ProfileDelete3=Do you want to delete the profile?
ProfileConnect1=The profile
ProfileConnect2=is missing or corrupt
ProfileConnect3=Connect with selected profile
ProfileNetworkSetting=Network Setting
ProfileWrongIP1=A valid IP address is necessary for this field.
ProfileWrongIP2=You have entered an incorrect IP address. Please try again.
ProfileWrongIP3=IP address is necessary for IP Address and Subnet Mask field.
ProfileImport1=A profile with the name
ProfileImport2=already exists. Do you want to replace it?
ProfileImport3=Import connection profile(s)
ProfileExport1=Please select a folder to export to.
ProfileExport2=Profile
ProfileExport3=already exists. Press OK to continue or Cancel to skip.
ProfileExport4=Export connection profiles
ProfileExport5=Please give a new name to this profile
ProfileExport6=Successfully exported
ProfileExport7=profile(s)
ProfileExport8=No profile exported.
ProfileExport9=Export profile(s)
ProfileSummary1=Use DHCP

[LinkInfo]
LinkInfoInactive=Inactive
LinkInfoNotInstalled=Not installed
LinkInfoDeviceFailed=Failed to change device configuration.
LinkInfoConnecting=Connecting...
LinkInfoSettingNetwork=Setting Network...
LinkInfoNetworkMode1=B-only mode
LinkInfoNetworkMode2=G-only mode
LinkInfoNetworkMode3=Mixed mode
LinkInfoPackets=Packets
LinkInfoNA=N/A

[WEP]
WEP1=You have entered an incorrect WEP key. Please try again.
WEP2=The WEP key should have %d hexadecimal characters ('0'~'9' or 'A' ~ 'F').
WEP3=The WEP key should have %d alphanumeric characters.
WEP4=alphanumeric characters.
WEP5=Security Setting
WEP6=hexadecimal characters ('0'~'9' or 'A' ~ 'F').
WEP7=The passphrase field is empty. Please enter the passphrase.
WEP8=Disabled
WEP9=64 Bits
WEP10=128 Bits
WEP11=Open
WEP12=Shared
WEP13=Auto Switch

[SiteSurvey]
SiteSurvey1=Searching ...

[Status]
StatusConnect1=Connected
StatusConnect2=Disconnected
StatusConnect3=Authenticating
StatusConnect4=Waiting for Keys
StatusConnect5=Open Ad-Hoc
StatusConnect6=Open Unauthenticated
StatusConnect7=Funk Not Licensed.
StatusWirelessMode1=Ad-Hoc
StatusWirelessMode2=Infrastructure
StatusTxRate1=1 Mbps
StatusTxRate2=2 Mbps
StatusTxRate3=5.5 Mbps
StatusTxRate4=6 Mbps
StatusTxRate5=9 Mbps
StatusTxRate6=11 Mbps
StatusTxRate7=12 Mbps
StatusTxRate8=24 Mbps
StatusTxRate9=36 Mbps
StatusTxRate10=48 Mbps
StatusTxRate11=54 Mbps
StatusTxRate12=1 or 2 Mbps
StatusTxRate13=Auto
StatusTxRate14=SpeedBooster
StatusWEPMode1=WEP
StatusWEPMode2=Off
StatusWEPMode3=N/A
StatusWEPMode4=WPA
StatusWEPMode5=WPA+Radius
StatusWEPMode6=Unknown
StatusWEPMode7=On
StatusWEPMode8=None
StatusEnable1=Enabled
StatusEnable2=Disabled
StatusStation1=Not Available
StatusStation2=Connected
StatusStation3=Authenticated
StatusStation4=Link Synchronized
StatusStation5=Scanning ...
StatusStation6=Disconnected
StatusStation7=Checking...
StatusLinkQuality1=No Signal
StatusLinkQuality2=Poor
StatusLinkQuality3=Good
StatusLinkQuality4=Very Good
StatusLinkQuality5=Excellent

[Security]
Security1=Please enter required security information
Security2=Passphrase should have between 8 to 63 characters.

[About]
AboutTitle=About Wireless Network Monitor
AboutCopyright=Copyright (c) 2004 Cisco System, Inc. All Rights Reserved.
AboutVersion=Version
AboutDriver=Driver
AboutUtility=WLAN Monitor
AboutLibrary=Library
AboutFirmware=Firmware
About1=Unknown
About2=Cannot open Linksys website. Please check your Internet browser settings.

[Other]
EuropeOnly=(Europe Only)
MsgRunning=The application is already running.
MsgFileMiss1=Some necessary files are missing.
MsgFileMiss2=These files are used to configure your adapter, please make sure you have properly install the software.
MsgFileMiss3=If you encounter this problem again, please reinstall this software from your Linksys CD.