netdm.inf Driver File Contents (DM9102.zip)

; /****************************************************************************
; ** THIS FILE IS Installation file for the DM9 Based Fast                   **
; ** Ethernet PCI Adapter.                                                   **
; ** Copyright 2001, DAVICOM Semiconductor, Inc.                             **
; **                                                                         **
; ** Add ACPIEnable parameter to registry.                                   **
; ** V1.04                                                                   **
; ** .Add NDIS2 driver                                                       **
; **  Vendor ID                                                              **
; ** V1.05 - (1) Don't check SubVendor ID                                    **
; **         (2) Change Signature for Windows 2000                           **
; **                                                                         **
; ** V1.06 -  11/17/99  Simoncc                                              **
; **         Combine all inf files, except of oemsetup.inf for NT 3.51/4.0   **
; **         Add a network installer (DM9NDI.DLL)                            **
; ** V1.07 -  11/24/99  Simoncc                                              **
; **         Add a CoInstaller for Windows 2000 (DM9INST.DLL)                **
; **                                                                         **
; ** V1.08 -  05/24/00  Simoncc                                              **
; **         Re-range the sections of this file                              **
; **                                                                         **
; ** V1.09 -  06/29/00  Simoncc                                              **
; **         Supporting Half/Full Based Switching Adapters                   **
; **         Adding two parameters "Tx HPNA Remote Command"                  **
; **         and "Rx HPNA Remote Command"                                    **
; ** V1.10 -  08/17/00  Simoncc                                              **
; **         Fixed problems of inf during certification                      **
; **                                                                         **
; ** V1.11 -  08/25/00  Simoncc                                              **
; **         Supporting 10 Based-T PCI Adapter                               **
; **                                                                         **
; ** V1.12 -  10/17/00  Simoncc                                              **
; **                                                                         **
; ** V1.13 -  01/10/2001  Simoncc                                            **
; **                                                                         **
; ** V1.13A - 03/28/2001 Spenser change for IA-Link                          **
; ** V1.13B - 04/03/2001 Spenser change for Compaq                           **
; ** V1.40  - 04/16/2001 Spenser change for XP certificaiton                 **
; ** V1.41  - 06/01/2001 Spesner 1. remove "ndis2" interface.                **
; ** V1.43  - 11/20/2001 Spesner: 1. Add CNet PRO200WL & PRO200 adapter      **
; ****************************************************************************/

[Version]
Signature   = "$Chicago$"
Compatible  = 1
Class       = Net
ClassGUID   = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider    = %V_DSI%
DriverVer   = 12/04/2001, 1.38.01.1203
CatalogFile = dm9102b.cat

[Manufacturer]
%V_DSI% = DAVICOM
%V_CNET% = CNET

[ControlFlags]
ExcludeFromSelect = PCI\VEN_1282&DEV_9102, \
                    PCI\VEN_1282&DEV_9102&SUBSYS_82120291, \
                    PCI\VEN_1282&DEV_9102&SUBSYS_82120198, \
                    PCI\VEN_1282&DEV_9102&SUBSYS_82120298, \
                    PCI\VEN_1282&DEV_9102&SUBSYS_82120398, \
                    PCI\VEN_1282&DEV_9102&SUBSYS_82120498, \
                    PCI\VEN_1282&DEV_9102&SUBSYS_82120391, \
                    PCI\VEN_1282&DEV_9102&SUBSYS_82120491, \
                    PCI\VEN_1282&DEV_9009&SUBSYS_82120990, \
                    PCI\VEN_1282&DEV_9102&SUBSYS_434E4554, \
                    PCI\VEN_1282&DEV_9102&SUBSYS_50323030


[DAVICOM]
; DisplayName           Section       DeviceID
; -----------           -------       --------
%DM9102.DeviceDesc% = DM9102.ndi,     PCI\VEN_1282&DEV_9102&SUBSYS_82120291
%DM9EHR.DeviceDesc% = DM9102EH.ndi,   PCI\VEN_1282&DEV_9102&SUBSYS_82120198
%DM9ELR.DeviceDesc% = DM9102EH.ndi,   PCI\VEN_1282&DEV_9102&SUBSYS_82120298
%DM9HR.DeviceDesc%  = DM9102H.ndi,    PCI\VEN_1282&DEV_9102&SUBSYS_82120398
%DM9LR.DeviceDesc%  = DM9102H.ndi,    PCI\VEN_1282&DEV_9102&SUBSYS_82120498
%DM9HSW.DeviceDesc% = DM9102SW.ndi,   PCI\VEN_1282&DEV_9102&SUBSYS_82120391
%DM9FSW.DeviceDesc% = DM9102SW.ndi,   PCI\VEN_1282&DEV_9102&SUBSYS_82120491
%DM9009.DeviceDesc% = DM9009.ndi,     PCI\VEN_1282&DEV_9009&SUBSYS_82120990
%DM9GEN.DeviceDesc% = DM9102EH.ndi,   PCI\VEN_1282&DEV_9102

[CNET]
%PRO200WL.DeviceDesc%  = PRO200WL.ndi,  PCI\VEN_1282&DEV_9102&SUBSYS_434E4554
%PRO200.DeviceDesc%    = PRO200.ndi,    PCI\VEN_1282&DEV_9102&SUBSYS_50323030

;=============================================================================
;
; WIN9x
;
;=============================================================================
[DM9102.ndi]
AddReg    = DM9102.id.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg, DM9102.win.reg, DM9102.con.win.reg
CopyFiles = dm9pci.win.CopyFiles, dm9ndi.dll.CopyFiles

[DM9102EH.ndi]
AddReg    = DM9102.id.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg, dm9102.hpna.reg, DM9102.win.reg, DM9102.con.win.reg, DM9102.hpna.param.reg, DM9102.hpna.win.reg
CopyFiles = dm9pci.win.CopyFiles, dm9ndi.dll.CopyFiles

[DM9102H.ndi]
AddReg    = DM9102.id.reg, DM9102.pci.reg, DM9102.hpna.con.reg, dm9102.hpna.reg, DM9102.win.reg, DM9102.hpna.win.reg
CopyFiles = dm9pci.win.CopyFiles, dm9ndi.dll.CopyFiles

[DM9102SW.ndi]
AddReg    = DM9102.id.reg, DM9102.pci.reg, DM9102.win.reg
CopyFiles = dm9pci.win.CopyFiles, dm9ndi.dll.CopyFiles

[DM9009.ndi]
AddReg    = DM9009.id.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.win.reg, DM9102.con.win.reg
CopyFiles = dm9pci.win.CopyFiles, dm9ndi.dll.CopyFiles

;-------
[PRO200WL.ndi]
AddReg    = DM9102.id.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg, DM9102.win.reg, DM9102.con.win.reg
CopyFiles = dm9pci.win.CopyFiles, dm9ndi.dll.CopyFiles

[PRO200.ndi]
AddReg    = DM9102.id.reg, P200.pci.reg, DM9102.con.reg, DM9102.win.reg
CopyFiles = dm9pci.win.CopyFiles, dm9ndi.dll.CopyFiles

;=============================================================================
;
; WINNT specific entry
;
;=============================================================================
[DM9102.ndi.NT]
Characteristics = 0x84
BusType         = 5
AddReg          = DM9102.id.reg, DM9PCI.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg
CopyFIles       = DM9PCI.CopyFiles, DM9PCI.DLL.CopyFiles

[DM9102EH.ndi.NT]
Characteristics = 0x84
BusType         = 5
AddReg          = DM9102.id.reg, DM9PCI.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg, DM9102.hpna.reg, DM9102.hpna.param.reg
CopyFIles       = DM9PCI.CopyFiles, DM9PCI.DLL.CopyFiles

[DM9102H.ndi.NT]
Characteristics = 0x84
BusType         = 5
AddReg          = DM9102.id.reg, DM9PCI.reg, DM9102.pci.reg, DM9102.hpna.con.reg, DM9102.hpna.reg
CopyFIles       = DM9PCI.CopyFiles, DM9PCI.DLL.CopyFiles

[DM9102SW.ndi.NT]
Characteristics = 0x84
BusType         = 5
AddReg          = DM9102.id.reg, DM9PCI.reg, DM9102.pci.reg
CopyFIles       = DM9PCI.CopyFiles, DM9PCI.DLL.CopyFiles

[DM9009.ndi.NT]
Characteristics = 0x84
BusType         = 5
AddReg          = DM9009.id.reg, DM9PCI.reg, DM9102.pci.reg, DM9102.con.reg
CopyFIles       = DM9PCI.CopyFiles, DM9PCI.DLL.CopyFiles

[PRO200WL.ndi.NT]
Characteristics = 0x84
BusType         = 5
AddReg          = DM9102.id.reg, DM9PCI.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg
CopyFiles       = DM9PCI.CopyFiles, DM9PCI.DLL.CopyFiles

[PRO200.ndi.NT]
Characteristics = 0x84
BusType         = 5
AddReg          = DM9102.id.reg, DM9PCI.reg, P200.pci.reg, DM9102.con.reg
CopyFiles       = DM9PCI.CopyFiles, DM9PCI.DLL.CopyFiles

[DM9102.ndi.NT.Services]
AddService = DM9102, 2, DM9102.Service, common.EventLog

[DM9102EH.ndi.NT.Services]
AddService = DM9102, 2, DM9102.Service, common.EventLog

[DM9102H.ndi.NT.Services]
AddService = DM9102, 2, DM9102.Service, common.EventLog

[DM9102SW.ndi.NT.Services]
AddService = DM9102, 2, DM9102.Service, common.EventLog

[DM9009.ndi.NT.Services]
AddService = DM9102, 2, DM9102.Service, common.EventLog

[PRO200WL.ndi.NT.Services]
AddService = DM9102, 2, PRO200WL.Service, common.EventLog

[PRO200.ndi.NT.Services]
AddService = DM9102, 2, PRO200.Service, common.EventLog

[DM9PCI.CopyFiles]
DM9PCI5.SYS,,,2

[DM9PCI.DLL.CopyFiles]
DM9Inst.DLL,,,2

;=============================================================================
;
; Win9x id registry sections
; These are not needed by NT
;
;=============================================================================

[DM9102.id.reg]
HKR, Ndi, DeviceID, 0, "PCI\VEN_1282&DEV_9102"
HKR,,AdapterPCIID,0,"91021282"

[DM9009.id.reg]
HKR, Ndi, DeviceID, 0, "PCI\VEN_1282&DEV_9009"
HKR,,AdapterPCIID,0,"90091282"

;****************************************************************************
; PCI common parameters
;****************************************************************************

[DM9102.pci.reg]
;params
HKR,                            , AdapterType, 0,"5"
HKR,                            , BusType,     0,"5"            ;; PCI

;StoreAndForward
HKR, Ndi\params\StoreAndForward,     ParamDesc, 0,"Store And Forward"
HKR, Ndi\params\StoreAndForward,       default, 0,"1"
HKR, Ndi\params\StoreAndForward,          type, 0,"enum"
HKR, Ndi\params\StoreAndForward\enum,        0, 0,"Disabled"
HKR, Ndi\params\StoreAndForward\enum,        1, 0,"Enabled"

;Transmit Threshold
HKR, Ndi\params\TransmitThreshold,   ParamDesc,,"Transmit Threshold"
HKR, Ndi\params\TransmitThreshold,     default, 0,"200"
HKR, Ndi\params\TransmitThreshold,        type, 0,"enum"
HKR, Ndi\params\TransmitThreshold\enum,     48, 0,"  72 bytes"
HKR, Ndi\params\TransmitThreshold\enum,     60, 0,"  96 bytes"
HKR, Ndi\params\TransmitThreshold\enum,     80, 0," 128 bytes"
HKR, Ndi\params\TransmitThreshold\enum,     A0, 0," 160 bytes"
HKR, Ndi\params\TransmitThreshold\enum,    100, 0," 256 bytes"
HKR, Ndi\params\TransmitThreshold\enum,    200, 0," 512 bytes"
HKR, Ndi\params\TransmitThreshold\enum,    400, 0,"1024 bytes"

;ACPI Enable/Disable
HKR,Ndi\params\ACPIEnable,ParamDesc,,"PME"
HKR,Ndi\params\ACPIEnable,default,,"4"
HKR,Ndi\params\ACPIEnable,type,,"enum"
HKR,Ndi\params\ACPIEnable\enum,0,,"Disabled"
HKR,Ndi\params\ACPIEnable\enum,1,,"Link Change" 
HKR,Ndi\params\ACPIEnable\enum,2,,"Magic Packet"
HKR,Ndi\params\ACPIEnable\enum,3,,"Pattern Match"
HKR,Ndi\params\ACPIEnable\enum,4,,"ALL"
HKR,Ndi\params\ACPIEnable\enum,5,,"Magic&Match Packet"

;VLAN
;HKR, Ndi\params\VLan,     ParamDesc, 0,"VLAN"
;HKR, Ndi\params\VLan,       default, 0,"0"
;HKR, Ndi\params\VLan,          type, 0,"enum"
;HKR, Ndi\params\VLan\enum,        0, 0,"Disabled"
;HKR, Ndi\params\VLan\enum,        1, 0,"Enabled"
HKR, , VLan,0,"0"

;Tx Flow Control
HKR, Ndi\params\TxFlowCtrl,     ParamDesc, 0,"Transmit Flow Control"
HKR, Ndi\params\TxFlowCtrl,       default, 0,"0"
HKR, Ndi\params\TxFlowCtrl,          type, 0,"enum"
HKR, Ndi\params\TxFlowCtrl\enum,        0, 0,"Disabled"
HKR, Ndi\params\TxFlowCtrl\enum,        1, 0,"Enabled"

;Rx Flow Control
HKR, Ndi\params\RxFlowCtrl,     ParamDesc, 0,"Receive Flow Control"
HKR, Ndi\params\RxFlowCtrl,       default, 0,"0"
HKR, Ndi\params\RxFlowCtrl,          type, 0,"enum"
HKR, Ndi\params\RxFlowCtrl\enum,        0, 0,"Disabled"
HKR, Ndi\params\RxFlowCtrl\enum,        1, 0,"Enabled"

[DM9102.con.reg]
;ConnectionType
HKR, Ndi\params\ConnectionType,      ParamDesc,  0,"Connection Type"
HKR, Ndi\params\ConnectionType,      default,    0,"0"
HKR, Ndi\params\ConnectionType,      type,       0,"enum"
HKR, Ndi\params\ConnectionType\enum, 0,          0,"AutoSense"
HKR, Ndi\params\ConnectionType\enum, 1,          0,"10Mbps"
HKR, Ndi\params\ConnectionType\enum, 3,          0,"10Mbps Full_Duplex"

[DM9102.confe.reg]
HKR, Ndi\params\ConnectionType\enum, 2,          0,"100Mbps"
HKR, Ndi\params\ConnectionType\enum, 4,          0,"100Mbps Full_Duplex"

[DM9102.hpna.reg]
HKR,Ndi\params\HomeRunPower,ParamDesc,,"HomeNet Power"
HKR,Ndi\params\HomeRunPower,default,,"0"
HKR,Ndi\params\HomeRunPower,type,,"enum"
HKR,Ndi\params\HomeRunPower\enum,0,,"Low"
HKR,Ndi\params\HomeRunPower\enum,1,,"High" 

HKR,Ndi\params\HomeRunSpeed,ParamDesc,,"HomeNet Speed"
HKR,Ndi\params\HomeRunSpeed,default,,"1"
HKR,Ndi\params\HomeRunSpeed,type,,"enum"
HKR,Ndi\params\HomeRunSpeed\enum,0,,"Low"
HKR,Ndi\params\HomeRunSpeed\enum,1,,"High" 

HKR,Ndi\params\TxHpnaRemoteCommand,ParamDesc,,"Tx HPNA Remote Command"
HKR,Ndi\params\TxHpnaRemoteCommand,default,,"0"
HKR,Ndi\params\TxHpnaRemoteCommand,type,,"enum"
HKR,Ndi\params\TxHpnaRemoteCommand\enum,0,,"Disable"
HKR,Ndi\params\TxHpnaRemoteCommand\enum,1,,"Enable"

HKR,Ndi\params\RxHpnaRemoteCommand,ParamDesc,,"Rx HPNA Remote Command"
HKR,Ndi\params\RxHpnaRemoteCommand,default,,"0"
HKR,Ndi\params\RxHpnaRemoteCommand,type,,"enum"
HKR,Ndi\params\RxHpnaRemoteCommand\enum,0,,"Disable"
HKR,Ndi\params\RxHpnaRemoteCommand\enum,1,,"Enable"

;Noise Level
HKR, Ndi\params\NoiseLevel,   ParamDesc,,"Noise Level"
HKR, Ndi\params\NoiseLevel,     default, 0,"0"
HKR, Ndi\params\NoiseLevel,        type, 0,"enum"
HKR, Ndi\params\NoiseLevel\enum,     0, 0,"Default Value"
HKR, Ndi\params\NoiseLevel\enum,     8, 0,"  8"
HKR, Ndi\params\NoiseLevel\enum,     9, 0,"  9"
HKR, Ndi\params\NoiseLevel\enum,    10, 0," 10"
HKR, Ndi\params\NoiseLevel\enum,    11, 0," 11"
HKR, Ndi\params\NoiseLevel\enum,    12, 0," 12"
HKR, Ndi\params\NoiseLevel\enum,    13, 0," 13"
HKR, Ndi\params\NoiseLevel\enum,    14, 0," 14"
HKR, Ndi\params\NoiseLevel\enum,    15, 0," 15"
HKR, Ndi\params\NoiseLevel\enum,    16, 0," 16"
HKR, Ndi\params\NoiseLevel\enum,    17, 0," 17"
HKR, Ndi\params\NoiseLevel\enum,    18, 0," 18"
HKR, Ndi\params\NoiseLevel\enum,    19, 0," 19"
HKR, Ndi\params\NoiseLevel\enum,    20, 0," 20"

;HPNA Speed-up registers
HKR, , Reg29, 0,"4014"
HKR, , Reg30, 0,"1c2c"
HKR, , Reg31, 0,"4404"

[DM9102.hpna.param.reg]
HKR, Ndi\params\ConnectionType\enum, 5,          0,"1Mbps HomePNA"

[DM9102.hpna.con.reg]
HKR, ,ConnectionType,  0,"5"

[DM9102.con.win.reg]
HKR,NDI\params\ConnectionType,flag,1,20,00,00,00

;===================
; PRO200
;===================
[P200.pci.reg]
;params
HKR,                            , AdapterType, 0,"5"
HKR,                            , BusType,     0,"5"            ;; PCI

;StoreAndForward
HKR, Ndi\params\StoreAndForward,     ParamDesc, 0,"Store And Forward"
HKR, Ndi\params\StoreAndForward,       default, 0,"1"
HKR, Ndi\params\StoreAndForward,          type, 0,"enum"
HKR, Ndi\params\StoreAndForward\enum,        0, 0,"Disabled"
HKR, Ndi\params\StoreAndForward\enum,        1, 0,"Enabled"
;Windows 2000 does not support Ndi\Params\param-key-name\flag values.
;HKR,NDI\params\StoreAndForward,flag,1,20,00,00,00

;Transmit Threshold
HKR, Ndi\params\TransmitThreshold,   ParamDesc,,"Transmit Threshold"
HKR, Ndi\params\TransmitThreshold,     default, 0,"200"
HKR, Ndi\params\TransmitThreshold,        type, 0,"enum"
HKR, Ndi\params\TransmitThreshold\enum,     48, 0,"  72 bytes"
HKR, Ndi\params\TransmitThreshold\enum,     60, 0,"  96 bytes"
HKR, Ndi\params\TransmitThreshold\enum,     80, 0," 128 bytes"
HKR, Ndi\params\TransmitThreshold\enum,     A0, 0," 160 bytes"
HKR, Ndi\params\TransmitThreshold\enum,    100, 0," 256 bytes"
HKR, Ndi\params\TransmitThreshold\enum,    200, 0," 512 bytes"
HKR, Ndi\params\TransmitThreshold\enum,    400, 0,"1024 bytes"
;HKR,NDI\params\TransmitThreshold,flag, 1,20,00,00,00

;=============================================================================
;
; DM9102 NT specific
;
;=============================================================================

[DM9PCI.reg]
HKR, Ndi,                       Service,    0, "DM9102"
; use ndis5 as the upper bound because NT supports it
HKR, Ndi\Interfaces,            DefUpper,   0, "ndis5"
HKR, Ndi\Interfaces,            DefLower,   0, "ethernet"
HKR, Ndi\Interfaces,            UpperRange, 0, "ndis5"
HKR, Ndi\Interfaces,            LowerRange, 0, "ethernet"
HKR, ,  CoInstallers32, 0x00010000, "DM9Inst.dll, DM9InstProc"

[DM9102.Service]
DisplayName     = %DM9PCI.Service.DispName%
ServiceType     = 1 ;%SERVICE_KERNEL_DRIVER%
StartType       = 3 ;%SERVICE_DEMAND_START%
ErrorControl    = 1 ;%SERVICE_ERROR_NORMAL%
ServiceBinary   = %12%\DM9PCI5.SYS
LoadOrderGroup  = NDIS

[PRO200WL.Service]
DisplayName     = %PRO200WL.Service.DispName%
ServiceType     = 1 ;%SERVICE_KERNEL_DRIVER%
StartType       = 3 ;%SERVICE_DEMAND_START%
ErrorControl    = 1 ;%SERVICE_ERROR_NORMAL%
ServiceBinary   = %12%\DM9PCI5.SYS
LoadOrderGroup  = NDIS

[PRO200.Service]
DisplayName     = %PRO200.Service.DispName%
ServiceType     = 1 ;%SERVICE_KERNEL_DRIVER%
StartType       = 3 ;%SERVICE_DEMAND_START%
ErrorControl    = 1 ;%SERVICE_ERROR_NORMAL%
ServiceBinary   = %12%\DM9PCI5.SYS
LoadOrderGroup  = NDIS

[common.EventLog]
AddReg = common.AddEventLog.reg

[common.AddEventLog.reg]
HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
HKR, , TypesSupported,   0x00010001, 7

;=============================================================================
;
; DM9102 Win9x specific
;
;=============================================================================
[DM9102.win.reg]
HKR, ,              DevLoader,          0, "*ndis"
HKR, NDIS,          LogDriverName,      0, "DM9PCI"
HKR, NDIS,          MajorNdisVersion,   1, 03
HKR, NDIS,          MinorNdisVersion,   1, 0A

HKR, ,              EnumPropPages,      0, "netdi.dll,EnumPropPages"
HKR,Ndi,NdiInstaller,                    , "DM9ndi.dll,DM9NdiProc"
HKR, Ndi\Interfaces,DefUpper,           0, "ndis3"
HKR, Ndi\Interfaces,DefLower,           0, "ethernet"
HKR, Ndi\Interfaces,UpperRange,         0, "ndis3"
HKR, Ndi\Interfaces,LowerRange,         0, "ethernet"
HKR,NDI\params\StoreAndForward,flag,1,20,00,00,00
HKR,NDI\params\TransmitThreshold,flag,1,20,00,00,00
HKR,NDI\params\ACPIEnable,flag,1,20,00,00,00

;=============================================================================
;
;Ndis driver selection
;
;=============================================================================
HKR,Ndi\params\NdisVersion,ParamDesc,,"NDIS Version"
HKR,Ndi\params\NdisVersion,default,,0
HKR,Ndi\params\NdisVersion,type,,enum
HKR,Ndi\params\NdisVersion\enum,0,,"Auto Selection"
HKR,NDI\params\NdisVersion,flag,1,20,00,00,00

[DM9102.hpna.win.reg]
HKR,NDI\params\HomeRunPower,flag,1,20,00,00,00
HKR,NDI\params\HomeRunSpeed,flag,1,20,00,00,00
HKR,NDI\params\TxHpnaRemoteCommand,flag,1,20,00,00,00
HKR,NDI\params\RxHpnaRemoteCommand,flag,1,20,00,00,00
HKR,NDI\params\NoiseLevel,flag,1,20,00,00,00

;=============================================================================
;
; DestinationDirs
;
;=============================================================================
[dm9pci.win.CopyFiles]
DM9PCI5.SYS
DM9PCI4.SYS
DM9PCI3.SYS

[dm9ndi.dll.CopyFiles]
dm9ndi.dll

[DestinationDirs]
DefaultDestDir       =          12
DM9PCI.CopyFiles     =          12
DM9PCI.DLL.CopyFiles =          11
dm9pci.win.CopyFiles =          11
dm9ndi.dll.CopyFiles =          11

[SourceDisksNames]
50="10/100 PCI Based Network Drivers Disk",,

[SourceDisksFiles]
DM9PCI5.sys = 50,,10000
DM9Inst.dll = 50,,10000
DM9PCI4.sys = 50,,10000
DM9PCI3.sys = 50,,10000
DM9NDI.dll  = 50,,10000
DM9PCI.DOS  = 50,,10000

[Strings]
V_DSI    = "DAVICOM Semiconductor, Inc."
DM9102.DeviceDesc   = "DAVICOM 9102/A PCI Fast Ethernet Adapter "
DM9EHR.DeviceDesc   = "DAVICOM 1/10/100 PCI Fast Ethernet Adapter "
DM9ELR.DeviceDesc   = "DAVICOM LongRun/10/100 PCI Fast Ethernet Adapter "
DM9HR.DeviceDesc    = "DAVICOM PCI HomeRun Adapter "
DM9LR.DeviceDesc    = "DAVICOM PCI LongRun Adapter "
DM9GEN.DeviceDesc   = "10/100 PCI Fast Ethernet Based Adapter "
DM9FSW.DeviceDesc   = "DAVICOM 9102A Full Based Switching Adapter "
DM9HSW.DeviceDesc   = "DAVICOM 9102A Half Based Switching Adapter "
DM9009.DeviceDesc   = "DAVICOM 10 Base-T PCI Ethernet Adapter "

DM9PCI.Service.DispName = "DAVICOM PCI Based Network Adapter NT Driver"

V_CNET = "CNet Technology, Inc."
PRO200WL.DeviceDesc    = "CNet PRO200WL PCI Fast Ethernet Adapter           "
PRO200.DeviceDesc    = "CNet PRO200 PCI Fast Ethernet Adapter           "
PRO200WL.Service.DispName = "CNet PRO200WL PCI Fast Ethernet NT Driver    "
PRO200.Service.DispName = "CNet PRO200 PCI Fast Ethernet NT Driver    "


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.49