; OEMSETUP FILE FOR DM9 based Ethernet adapters ; Windows NT v3.51 ; Windows NT v4.0 ; ; Supported adapters: ; DAVICOM DM9102/A Based Adapter ; ; ; Usage: ; ; This file is the installation/configuration/deinstallation ; procedure of the DAVICOM DM9 driver for Windows NT. It can be called ; from Windows Setup directly, or via the Windows NT Networks ; Control Program Applet (NCPA) from inside the Windows ; Control Panel. ; ;---------------------------------------------------------------------------------------- [Identification] OptionType = NetAdapter [PlatformsSupported] PCI [Options] DM9 [FileConstants] UtilityInf = "UTILITY.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "DAVICOM Semiconductor, Inc." ProductMajorVersion = "3" ProductMinorVersion = "00" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) VendorID = 4738 ;; 1282 Vendor Identification DM9102ID = 37122 ;; 9102 Device Identification DM9009ID = 36873 ;; 9009 Device Identification ProductSoftwareName = "DM9PCI" ProductSoftwareTitle = "DAVICOM PCI Based Network Adapter Driver" ProductSoftwareImagePath3 = "\SystemRoot\System32\drivers\DM9PCI3.sys" ProductSoftwareImagePath4 = "\SystemRoot\System32\drivers\DM9PCI4.sys" ProductSoftwareDriverPath3 = $(!STF_WINDOWSSYSPATH)"\DRIVERS\dm9pci3.sys" ProductSoftwareDriverPath4 = $(!STF_WINDOWSSYSPATH)"\DRIVERS\dm9pci4.sys" NetRuleSoftwareType = "DM9PCISys ndisDriver DM9PCIDriver" NetRuleSoftwareType = "DM9PCISys ndisDriver DM9PCIDriver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """DM9PCISys"" yes no container" NetRuleSoftwareClass = {"DM9PCIDriver basic"} NetRuleSoftwareSWBindable = {"DM9PCIDriver DM9Adapter non exclusive 100"} ProductHardwareName = "DM9PCI" InstallerDllName = "DM9INST.DLL" InstallerProc = "DM9InstNtProc" InstallerMediaProc = "DM9InstDiagBox" Source_Directory = "" ProductHardwareDM9Title = "DAVICOM PCI Based Network Adapter " NetRuleHardwareDM9Type = "DM9 DM9Adapter" NetRuleHardwareDM9Class = {"DM9 Adapter basic"} AdapterDM9Type = 5 ;; PCI board HelpDM9Id = 30 ;DM9102PCIID = 2432832130 ;; 0x91021282 VendorID+DeviceID NetRuleHardwareBindForm = " yes yes container" ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" ;simoncc VersionKeyName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion" [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] set Option = $($1) ;Adapter Name set SrcDir = $($2) ;Source Directory set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants set NetRuleSoftwareBindable = $($R1) read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = "OK" endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(Function$(Option)Title) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo else set StartLabel = configureadapter endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif set from = $(fatal) set to = $(fatal) goto $(StartLabel) installadapter = + install "Install-Dll" OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) != "OK" set CommonStatus = STATUS_USERCANCEL goto end endif set OldVersionExisted = $(TRUE) endif Endif ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) endif goto installproduct configureadapter = + Ifstr(i) $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Goto fatalregistry Endif Endif ;;;;;;;;;simoncc set FS_KeyThisService = "" set FS_KeyParameters = "" set FS_KeyComponent = $(KeyProduct) set FS_TypeComponent = "" Shell $(UtilityInf), BaseServiceKey set FS_KeyServices = $($R1) set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Goto fatalregistry endif EnumRegValue $(FS_KeyComponent) FS_ValueList set FS_SvcName = "" ForListDo $(FS_ValueList) set FS_ValueName = *($($),1) Ifstr(i) $(FS_ValueName) == ServiceName set FS_SvcName = *($($),4) goto F_S_Break1 endif EndForListDo F_S_Break1 = + Ifstr $(FS_SvcName) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Goto fatalregistry endif OpenRegKey $(FS_KeyServices) "" $(FS_SvcName) $(MAXIMUM_ALLOWED) FS_KeyThisService Ifstr $(FS_KeyThisService) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Goto fatalregistry endif OpenRegKey $(FS_KeyThisService) "" "Parameters" $(MAXIMUM_ALLOWED) FS_KeyParameters Ifstr $(FS_KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Goto fatalregistry endif CloseRegKey $(FS_KeyParameters) CloseRegKey $(FS_KeyThisService) CloseRegKey $(FS_KeyParameters) set KeyParameters = $(FS_SvcName) LoadLibrary "disk 0" $(InstallerDllName) hLib LibraryProcedure Result $(hLib) $(InstallerMediaProc) $(!STF_HWND) $(KeyParameters) FreeLibrary $(hLib) goto successful ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; installproduct =+ StartWait ;;;;;;;; Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DM9102ID) ifint $($ShellCode) != $(!SHELL_CODE_OK) set ErrorCondition = $(!SHELL_CODE_ERROR) else-ifstr(i) $($R0) == {} set ErrorCondition = $(!SHELL_CODE_ERROR) endif endif set AdapterList = $($R0) Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DM9009ID) ifint $($ShellCode) != $(!SHELL_CODE_OK) ifint $(ErrorCondition) == $(!SHELL_CODE_ERROR) goto ShellCodeError endif else-ifstr(i) $($R0) == {} ifint $(ErrorCondition) == $(!SHELL_CODE_ERROR) set Error = $(CANNOT_FIND_ANY_CARD) set CommonStatus = USER_CANCEL set from = end goto nonfatal endif endif endif ifint $(ErrorCondition) == $(!SHELL_CODE_ERROR) set AdapterList = $($R0) else set AdapterListAppend = $($R0) ForListDo $(AdapterListAppend) set AdapterList = >($(AdapterList), $($)) EndForListDo endif ifint $(OldVersionExisted) == $(FALSE) Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif OpenRegKey $(!REG_H_LOCAL) "" $(VersionKeyName) $(MAXIMUM_ALLOWED) KeyVersion GetRegValue $(KeyVersion),"CurrentVersion",VersionStruct CloseRegKey $(KeyVersion) Set NTVersion = *($(VersionStruct),4) Ifstr(i) $(NTVersion) == "3.51" Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath3), "kernel", "NDIS", {}, "",+ $(NetEventDLL) else Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath4), "kernel", "NDIS", {}, "",+ $(NetEventDLL) endif Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) goto fatalregistry endif Set SoftProductKey = $($R1) Set SoftNetRuleKey = $($R2) Set SoftServiceKey = $($R3) Set SoftParameterKey = $($R4) Set SoftLinkageKey = $($R5) set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait goto fatalregistry endif endif ForListDo $(AdapterList) set BusNum = *($($),1) set DeviceNum = *($($),2) set FunctionNum = *($($),3) Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), + $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) != "YES" Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif Set HardNetCardKey = $($R1) Set HardNetRuleKey = $($R2) Set HardParameterKey = $($R3) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set BusTypeNum = 5 set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {HomeRunPower,$(NoTitle),$(!REG_VT_DWORD),0},+ {HomeRunSpeed,$(NoTitle),$(!REG_VT_DWORD),1},+ {TxHpnaRemoteCommand,$(NoTitle),$(!REG_VT_DWORD),1},+ {RxHpnaRemoteCommand,$(NoTitle),$(!REG_VT_DWORD),0},+ {NoiseLevel,$(NoTitle),$(!REG_VT_DWORD),2},+ {Reg29,$(NoTitle),$(!REG_VT_DWORD),16404},+ {Reg30,$(NoTitle),$(!REG_VT_DWORD),7212},+ {Reg31,$(NoTitle),$(!REG_VT_DWORD),17412},+ {AdapterPCIID,$(NoTitle),$(!REG_VT_DWORD),$($(Option)PCIID)}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(HardNetCardKey) CloseRegKey $(HardNetRuleKey) set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+ {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+ {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) CloseRegKey $(HardParameterKey) ;;;;;;;simoncc LoadLibrary "disk 0" $(InstallerDllName) hLib LibraryProcedure Result $(hLib) $(InstallerMediaProc) $(!STF_HWND) $(ProductHardwareName) $(AdapterNumber) $(BusNum) $(DeviceNum) FreeLibrary $(hLib) ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; endif endif EndForListDo EndWait goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto removedriver UpgradeSoftware = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} CloseRegKey $(KeyProduct) else goto fatalregistry endif goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto removedriver ;;;;;;;;;;;;;;;;;;;;;;simoncc removedriver = + OpenRegKey $(!REG_H_LOCAL) "" $(VersionKeyName) $(MAXIMUM_ALLOWED) KeyVersion GetRegValue $(KeyVersion),"CurrentVersion",VersionStruct CloseRegKey $(KeyVersion) Set NTVersion = *($(VersionStruct),4) Ifstr(i) $(NTVersion) == "3.51" ; OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct ; Ifstr $(KeyProduct) == $(KeyNull) ; AddFileToDeleteList $(ProductSoftwareDriverPath3) ; AddFileToDeleteList $(!STF_WINDOWSSYSPATH)"\"$(InstallerDllName) ; else ; CloseRegKey $(KeyProduct) ; endif LoadLibrary "disk 0" $(InstallerDllName) hLib LibraryProcedure Result $(hLib) $(InstallerProc) FreeLibrary $(hLib) ; AddFileToDeleteList $(!STF_WINDOWSSYSPATH)"\"$(InstallerDllName) else LoadLibrary "disk 0" $(InstallerDllName) hLib LibraryProcedure Result $(hLib) $(InstallerProc) FreeLibrary $(hLib) ; AddFileToDeleteList $(!STF_WINDOWSSYSPATH)"\"$(InstallerDllName) endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set CommonStatus = STATUS_USERCANCEL Set Severity = STATUS goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [Install-Option] set STF_VITAL = "" OpenRegKey $(!REG_H_LOCAL) "" $(VersionKeyName) $(MAXIMUM_ALLOWED) KeyVersion GetRegValue $(KeyVersion),"CurrentVersion",VersionStruct CloseRegKey $(KeyVersion) Set NTVersion = *($(VersionStruct),4) ifstr(i) $(AddCopy) == "YES" Ifstr(i) $(NTVersion) == "3.51" AddSectionFilesToCopyList Files-Ndis3 $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)\drivers else AddSectionFilesToCopyList Files-Ndis4 $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)\drivers endif endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif Exit [Install-Dll] set STF_VITAL = "" AddSectionFilesToCopyList Files-Dll $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" OpenRegKey $(!REG_H_LOCAL) "" $(VersionKeyName) $(MAXIMUM_ALLOWED) KeyVersion GetRegValue $(KeyVersion),"CurrentVersion",VersionStruct CloseRegKey $(KeyVersion) Set NTVersion = *($(VersionStruct),4) AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) Ifstr(i) $(NTVersion) == "3.51" AddSectionFilesToCopyList Files-Ndis3 $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)\drivers else AddSectionFilesToCopyList Files-Ndis4 $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)\drivers endif set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Source Media Descriptions] 1 = "DAVICOM PCI Based Network Adapter Driver" [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 STF_PLATFORM = Alpha [Files-Inf] 1, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename) [Files-Ndis3] 1,DM9PCI3.SYS , SIZE=999 [Files-Ndis4] 1,DM9PCI4.SYS , SIZE=999 [Files-Dll] 1,DM9INST.DLL, SIZE=999 [LanguagesSupported] ENG [OptionsTextENG] ;OEM ;Show in the selection of cards when installation DM9 = "DAVICOM PCI Based Network Adapter" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" ;OEM ProductSoftwareDescription = "DAVICOM PCI Based Network Adapter Driver" ProductHardwareDM9Description = "DAVICOM PCI Based Network Adapter... " NoList = ^(NoChoices, 1) NoValues = ^(NoChoices, 2) ShellCodeErrorTitle = "Error: "$(Function$(Option)Title) ShellCodeErrorText = "Shell Code Error." CANNOT_FIND_ANY_CARD = "Network card is not present in the system" [DialogConstantsENG] ;Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.