; /**************************************************************************** ; ** Name: NETDMA.INF ** ; ** THIS FILE IS Installation file for the DM9102A ** ; ** Fast PCI Ethernet Adapter. ** ; ** V1.00 - 01/31/2002 Spenser ** ; ** 1. For XP, WIN2K, WIN98 install NDIS5 driver ** ; ** V1.01 - 02/21/2002 Spenser ** ; ** 1. AddReg: 8021qTagging, NetworkAddress, VLANID. ** ; ** V1.02 - 03/01/2002 Spenser ** ; ** 1. Add "WakeUp on APM Mode" option. ** ; ****************************************************************************/ [Version] Signature = "$Chicago$" Compatible = 1 Class = Net ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318} Provider = %V_DSI% DriverVer = 10/29/2002, 1.55.02.1029 CatalogFile = DM9102C.CAT [Manufacturer] %V_DSI% = DAVICOM %V_CNET% = CNET %V_ARCHTEK% = ARCHTEK [ControlFlags] ExcludeFromSelect = PCI\VEN_1282&DEV_9102, \ PCI\VEN_1282&DEV_9102&SUBSYS_91021282, \ PCI\VEN_1282&DEV_9102&SUBSYS_82120291, \ PCI\VEN_1282&DEV_9102&SUBSYS_82120198, \ PCI\VEN_1282&DEV_9102&SUBSYS_82120298, \ PCI\VEN_1282&DEV_9102&SUBSYS_82120398, \ PCI\VEN_1282&DEV_9102&SUBSYS_82120498, \ PCI\VEN_1282&DEV_9102&SUBSYS_82120391, \ PCI\VEN_1282&DEV_9102&SUBSYS_82120491, \ PCI\VEN_1282&DEV_9009&SUBSYS_82120990, \ PCI\VEN_1282&DEV_9102&SUBSYS_434E4554, \ PCI\VEN_1282&DEV_9102&SUBSYS_50323030, \ PCI\VEN_1282&DEV_9102&SUBSYS_150014FE [DAVICOM] ; DisplayName Section DeviceID ; ----------- ------- -------- %DM9102A.DeviceDesc% = DM9102.ndi, PCI\VEN_1282&DEV_9102&SUBSYS_91021282 %DM9102.DeviceDesc% = DM9102.ndi, PCI\VEN_1282&DEV_9102&SUBSYS_82120291 %DM9EHR.DeviceDesc% = DM9102EH.ndi, PCI\VEN_1282&DEV_9102&SUBSYS_82120198 %DM9ELR.DeviceDesc% = DM9102EH.ndi, PCI\VEN_1282&DEV_9102&SUBSYS_82120298 %DM9HR.DeviceDesc% = DM9102H.ndi, PCI\VEN_1282&DEV_9102&SUBSYS_82120398 %DM9LR.DeviceDesc% = DM9102H.ndi, PCI\VEN_1282&DEV_9102&SUBSYS_82120498 %DM9HSW.DeviceDesc% = DM9102SW.ndi, PCI\VEN_1282&DEV_9102&SUBSYS_82120391 %DM9FSW.DeviceDesc% = DM9102SW.ndi, PCI\VEN_1282&DEV_9102&SUBSYS_82120491 %DM9009.DeviceDesc% = DM9009.ndi, PCI\VEN_1282&DEV_9009&SUBSYS_82120990 %DM9GEN.DeviceDesc% = DM9102EH.ndi, PCI\VEN_1282&DEV_9102 [CNET] %PRO200WL.DeviceDesc% = PRO200WL.ndi, PCI\VEN_1282&DEV_9102&SUBSYS_434E4554 %PRO200.DeviceDesc% = PRO200.ndi, PCI\VEN_1282&DEV_9102&SUBSYS_50323030 [ARCHTEK] %DPD110.DeviceDesc% = DM9102.ndi, PCI\VEN_1282&DEV_9102&SUBSYS_150014FE ;============================================================================= ; ; WIN9x ; ;============================================================================= [DM9102.ndi] AddReg = DM9102.id.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg, DM9102.win.reg, DM9102.con.win.reg CopyFiles = dm9pci.win.CopyFiles [DM9102EH.ndi] AddReg = DM9102.id.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg, dm9102.hpna.reg, DM9102.win.reg, DM9102.con.win.reg, DM9102.hpna.param.reg, DM9102.hpna.win.reg CopyFiles = dm9pci.win.CopyFiles [DM9102H.ndi] AddReg = DM9102.id.reg, DM9102.pci.reg, DM9102.hpna.con.reg, dm9102.hpna.reg, DM9102.win.reg, DM9102.hpna.win.reg CopyFiles = dm9pci.win.CopyFiles [DM9102SW.ndi] AddReg = DM9102.id.reg, DM9102.pci.reg, DM9102.win.reg CopyFiles = dm9pci.win.CopyFiles [DM9009.ndi] AddReg = DM9009.id.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.win.reg, DM9102.con.win.reg CopyFiles = dm9pci.win.CopyFiles ;------- [PRO200WL.ndi] AddReg = DM9102.id.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg, DM9102.win.reg, DM9102.con.win.reg CopyFiles = dm9pci.win.CopyFiles [PRO200.ndi] AddReg = DM9102.id.reg, P200.pci.reg, DM9102.con.reg, DM9102.win.reg CopyFiles = dm9pci.win.CopyFiles ;============================================================================= ; ; WINNT specific entry ; ;============================================================================= [DM9102.ndi.NT] Characteristics = 0x84 BusType = 5 AddReg = DM9102.id.reg, DM9PCI.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg CopyFIles = DM9PCI.CopyFiles [DM9102EH.ndi.NT] Characteristics = 0x84 BusType = 5 AddReg = DM9102.id.reg, DM9PCI.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg, DM9102.hpna.reg, DM9102.hpna.param.reg CopyFIles = DM9PCI.CopyFiles [DM9102H.ndi.NT] Characteristics = 0x84 BusType = 5 AddReg = DM9102.id.reg, DM9PCI.reg, DM9102.pci.reg, DM9102.hpna.con.reg, DM9102.hpna.reg CopyFIles = DM9PCI.CopyFiles [DM9102SW.ndi.NT] Characteristics = 0x84 BusType = 5 AddReg = DM9102.id.reg, DM9PCI.reg, DM9102.pci.reg CopyFIles = DM9PCI.CopyFiles [DM9009.ndi.NT] Characteristics = 0x84 BusType = 5 AddReg = DM9009.id.reg, DM9PCI.reg, DM9102.pci.reg, DM9102.con.reg CopyFIles = DM9PCI.CopyFiles [PRO200WL.ndi.NT] Characteristics = 0x84 BusType = 5 AddReg = DM9102.id.reg, DM9PCI.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg CopyFiles = DM9PCI.CopyFiles [PRO200.ndi.NT] Characteristics = 0x84 BusType = 5 AddReg = DM9102.id.reg, DM9PCI.reg, P200.pci.reg, DM9102.con.reg CopyFiles = DM9PCI.CopyFiles [DM9102.ndi.NT.Services] AddService = DM9102, 2, DM9102.Service, common.EventLog [DM9102EH.ndi.NT.Services] AddService = DM9102, 2, DM9102.Service, common.EventLog [DM9102H.ndi.NT.Services] AddService = DM9102, 2, DM9102.Service, common.EventLog [DM9102SW.ndi.NT.Services] AddService = DM9102, 2, DM9102.Service, common.EventLog [DM9009.ndi.NT.Services] AddService = DM9102, 2, DM9102.Service, common.EventLog [PRO200WL.ndi.NT.Services] AddService = DM9102, 2, PRO200WL.Service, common.EventLog [PRO200.ndi.NT.Services] AddService = DM9102, 2, PRO200.Service, common.EventLog [DM9PCI.CopyFiles] DM9PCI5.SYS,,,2 ;============================================================================= ; ; Win9x id registry sections ; These are not needed by NT ; ;============================================================================= [DM9102.id.reg] HKR, Ndi, DeviceID, 0, "PCI\VEN_1282&DEV_9102" HKR,,AdapterPCIID,0,"91021282" [DM9009.id.reg] HKR, Ndi, DeviceID, 0, "PCI\VEN_1282&DEV_9009" HKR,,AdapterPCIID,0,"90091282" ;**************************************************************************** ; PCI common parameters ;**************************************************************************** [DM9102.pci.reg] ;params HKR, , AdapterType, 0,"5" HKR, , BusType, 0,"5" ;; PCI ; Locally Administered Address HKR,Ndi\Params\NetworkAddress, ParamDesc, 0, "Locally Administered Address" HKR,Ndi\params\NetworkAddress, type, 0, "edit" HKR,Ndi\params\NetworkAddress, default, 0, "000000000000" HKR,Ndi\params\NetworkAddress, LimitText, 0, "12" HKR,Ndi\params\NetworkAddress, UpperCase, 0, "1" HKR,Ndi\params\NetworkAddress, Optional, 0, "1" ; VLAN ID HKR,Ndi\Params\VlanId, ParamDesc, 0, "VLAN ID" HKR,Ndi\Params\VlanId, Type, 0, "int" HKR,Ndi\Params\VlanId, Default, 0, "0" HKR,Ndi\Params\VlanId, Min, 0, "0" HKR,Ndi\Params\VlanId, Max, 0, "4094" HKR,Ndi\Params\VlanId, Step, 0, "1" HKR,Ndi\Params\VlanId, Base, 0, "10" ; QoS HKR, Ndi\params\8021qTagging, ParamDesc, 0,"8021p Tagging" HKR, Ndi\params\8021qTagging, default, 0,"0" HKR, Ndi\params\8021qTagging, type, 0,"enum" HKR, Ndi\params\8021qTagging\enum, 0, 0,"Disabled" HKR, Ndi\params\8021qTagging\enum, 1, 0,"Enabled" ;StoreAndForward HKR, Ndi\params\StoreAndForward, ParamDesc, 0,"Store And Forward" HKR, Ndi\params\StoreAndForward, default, 0,"0" HKR, Ndi\params\StoreAndForward, type, 0,"enum" HKR, Ndi\params\StoreAndForward\enum, 0, 0,"Disabled" HKR, Ndi\params\StoreAndForward\enum, 1, 0,"Enabled" ;Transmit Threshold HKR, Ndi\params\TransmitThreshold, ParamDesc,,"Transmit Threshold" HKR, Ndi\params\TransmitThreshold, default, 0,"48" HKR, Ndi\params\TransmitThreshold, type, 0,"enum" HKR, Ndi\params\TransmitThreshold\enum, 48, 0," 72 bytes" HKR, Ndi\params\TransmitThreshold\enum, 60, 0," 96 bytes" HKR, Ndi\params\TransmitThreshold\enum, 80, 0," 128 bytes" HKR, Ndi\params\TransmitThreshold\enum, A0, 0," 160 bytes" HKR, Ndi\params\TransmitThreshold\enum, 100, 0," 256 bytes" HKR, Ndi\params\TransmitThreshold\enum, 200, 0," 512 bytes" HKR, Ndi\params\TransmitThreshold\enum, 400, 0,"1024 bytes" ;ACPI Enable/Disable HKR,Ndi\params\ACPIEnable,ParamDesc,,"PME" HKR,Ndi\params\ACPIEnable,default,,"5" HKR,Ndi\params\ACPIEnable,type,,"enum" HKR,Ndi\params\ACPIEnable\enum,0,,"Disabled" HKR,Ndi\params\ACPIEnable\enum,1,,"Link Change" HKR,Ndi\params\ACPIEnable\enum,2,,"Magic Packet" HKR,Ndi\params\ACPIEnable\enum,3,,"Pattern Match" HKR,Ndi\params\ACPIEnable\enum,4,,"ALL" HKR,Ndi\params\ACPIEnable\enum,5,,"Magic&Match Packet" ;APM HKR, Ndi\params\APMWakeUp, ParamDesc, 0,"WakeUp on APM Mode" HKR, Ndi\params\APMWakeUp, default, 0,"0" HKR, Ndi\params\APMWakeUp, type, 0,"enum" HKR, Ndi\params\APMWakeUp\enum, 0, 0,"Disabled" HKR, Ndi\params\APMWakeUp\enum, 1, 0,"Enabled" ;Tx Flow Control HKR, Ndi\params\TxFlowCtrl, ParamDesc, 0,"Transmit Flow Control" HKR, Ndi\params\TxFlowCtrl, default, 0,"0" HKR, Ndi\params\TxFlowCtrl, type, 0,"enum" HKR, Ndi\params\TxFlowCtrl\enum, 0, 0,"Disabled" HKR, Ndi\params\TxFlowCtrl\enum, 1, 0,"Enabled" ;Rx Flow Control HKR, Ndi\params\RxFlowCtrl, ParamDesc, 0,"Receive Flow Control" HKR, Ndi\params\RxFlowCtrl, default, 0,"0" HKR, Ndi\params\RxFlowCtrl, type, 0,"enum" HKR, Ndi\params\RxFlowCtrl\enum, 0, 0,"Disabled" HKR, Ndi\params\RxFlowCtrl\enum, 1, 0,"Enabled" [DM9102.con.reg] ;ConnectionType HKR, Ndi\params\ConnectionType, ParamDesc, 0,"Connection Type" HKR, Ndi\params\ConnectionType, default, 0,"0" HKR, Ndi\params\ConnectionType, type, 0,"enum" HKR, Ndi\params\ConnectionType\enum, 0, 0,"AutoSense" HKR, Ndi\params\ConnectionType\enum, 1, 0,"10Mbps" HKR, Ndi\params\ConnectionType\enum, 3, 0,"10Mbps Full_Duplex" [DM9102.confe.reg] HKR, Ndi\params\ConnectionType\enum, 2, 0,"100Mbps" HKR, Ndi\params\ConnectionType\enum, 4, 0,"100Mbps Full_Duplex" [DM9102.hpna.reg] HKR,Ndi\params\HomeRunPower,ParamDesc,,"HomeNet Power" HKR,Ndi\params\HomeRunPower,default,,"0" HKR,Ndi\params\HomeRunPower,type,,"enum" HKR,Ndi\params\HomeRunPower\enum,0,,"Low" HKR,Ndi\params\HomeRunPower\enum,1,,"High" HKR,Ndi\params\HomeRunSpeed,ParamDesc,,"HomeNet Speed" HKR,Ndi\params\HomeRunSpeed,default,,"1" HKR,Ndi\params\HomeRunSpeed,type,,"enum" HKR,Ndi\params\HomeRunSpeed\enum,0,,"Low" HKR,Ndi\params\HomeRunSpeed\enum,1,,"High" HKR,Ndi\params\TxHpnaRemoteCommand,ParamDesc,,"Tx HPNA Remote Command" HKR,Ndi\params\TxHpnaRemoteCommand,default,,"0" HKR,Ndi\params\TxHpnaRemoteCommand,type,,"enum" HKR,Ndi\params\TxHpnaRemoteCommand\enum,0,,"Disable" HKR,Ndi\params\TxHpnaRemoteCommand\enum,1,,"Enable" HKR,Ndi\params\RxHpnaRemoteCommand,ParamDesc,,"Rx HPNA Remote Command" HKR,Ndi\params\RxHpnaRemoteCommand,default,,"0" HKR,Ndi\params\RxHpnaRemoteCommand,type,,"enum" HKR,Ndi\params\RxHpnaRemoteCommand\enum,0,,"Disable" HKR,Ndi\params\RxHpnaRemoteCommand\enum,1,,"Enable" ;Noise Level HKR, Ndi\params\NoiseLevel, ParamDesc,,"Noise Level" HKR, Ndi\params\NoiseLevel, default, 0,"0" HKR, Ndi\params\NoiseLevel, type, 0,"enum" HKR, Ndi\params\NoiseLevel\enum, 0, 0,"Default Value" HKR, Ndi\params\NoiseLevel\enum, 8, 0," 8" HKR, Ndi\params\NoiseLevel\enum, 9, 0," 9" HKR, Ndi\params\NoiseLevel\enum, 10, 0," 10" HKR, Ndi\params\NoiseLevel\enum, 11, 0," 11" HKR, Ndi\params\NoiseLevel\enum, 12, 0," 12" HKR, Ndi\params\NoiseLevel\enum, 13, 0," 13" HKR, Ndi\params\NoiseLevel\enum, 14, 0," 14" HKR, Ndi\params\NoiseLevel\enum, 15, 0," 15" HKR, Ndi\params\NoiseLevel\enum, 16, 0," 16" HKR, Ndi\params\NoiseLevel\enum, 17, 0," 17" HKR, Ndi\params\NoiseLevel\enum, 18, 0," 18" HKR, Ndi\params\NoiseLevel\enum, 19, 0," 19" HKR, Ndi\params\NoiseLevel\enum, 20, 0," 20" ;HPNA Speed-up registers HKR, , Reg29, 0,"4014" HKR, , Reg30, 0,"1c2c" HKR, , Reg31, 0,"4404" [DM9102.hpna.param.reg] HKR, Ndi\params\ConnectionType\enum, 5, 0,"1Mbps HomePNA" [DM9102.hpna.con.reg] HKR, ,ConnectionType, 0,"5" [DM9102.con.win.reg] HKR,NDI\params\ConnectionType,flag,1,20,00,00,00 ;=================== ; PRO200 ;=================== [P200.pci.reg] ;params HKR, , AdapterType, 0,"5" HKR, , BusType, 0,"5" ;; PCI ;StoreAndForward HKR, Ndi\params\StoreAndForward, ParamDesc, 0,"Store And Forward" HKR, Ndi\params\StoreAndForward, default, 0,"0" HKR, Ndi\params\StoreAndForward, type, 0,"enum" HKR, Ndi\params\StoreAndForward\enum, 0, 0,"Disabled" HKR, Ndi\params\StoreAndForward\enum, 1, 0,"Enabled" ;Windows 2000 does not support Ndi\Params\param-key-name\flag values. ;HKR,NDI\params\StoreAndForward,flag,1,20,00,00,00 ;Transmit Threshold HKR, Ndi\params\TransmitThreshold, ParamDesc,,"Transmit Threshold" HKR, Ndi\params\TransmitThreshold, default, 0,"A0" HKR, Ndi\params\TransmitThreshold, type, 0,"enum" HKR, Ndi\params\TransmitThreshold\enum, 48, 0," 72 bytes" HKR, Ndi\params\TransmitThreshold\enum, 60, 0," 96 bytes" HKR, Ndi\params\TransmitThreshold\enum, 80, 0," 128 bytes" HKR, Ndi\params\TransmitThreshold\enum, A0, 0," 160 bytes" HKR, Ndi\params\TransmitThreshold\enum, 100, 0," 256 bytes" HKR, Ndi\params\TransmitThreshold\enum, 200, 0," 512 bytes" HKR, Ndi\params\TransmitThreshold\enum, 400, 0,"1024 bytes" ;HKR,NDI\params\TransmitThreshold,flag, 1,20,00,00,00 ;============================================================================= ; ; DM9102 NT specific ; ;============================================================================= [DM9PCI.reg] HKR, Ndi, Service, 0, "DM9102" ; use ndis5 as the upper bound because NT supports it HKR, Ndi\Interfaces, DefUpper, 0, "ndis5" HKR, Ndi\Interfaces, DefLower, 0, "ethernet" HKR, Ndi\Interfaces, UpperRange, 0, "ndis5" HKR, Ndi\Interfaces, LowerRange, 0, "ethernet" ;HKR, , CoInstallers32, 0x00010000, "DM9Inst.dll, DM9InstProc" [DM9102.Service] DisplayName = %DM9PCI.Service.DispName% ServiceType = 1 ;%SERVICE_KERNEL_DRIVER% StartType = 3 ;%SERVICE_DEMAND_START% ErrorControl = 1 ;%SERVICE_ERROR_NORMAL% ServiceBinary = %12%\DM9PCI5.SYS LoadOrderGroup = NDIS [PRO200WL.Service] DisplayName = %PRO200WL.Service.DispName% ServiceType = 1 ;%SERVICE_KERNEL_DRIVER% StartType = 3 ;%SERVICE_DEMAND_START% ErrorControl = 1 ;%SERVICE_ERROR_NORMAL% ServiceBinary = %12%\DM9PCI5.SYS LoadOrderGroup = NDIS [PRO200.Service] DisplayName = %PRO200.Service.DispName% ServiceType = 1 ;%SERVICE_KERNEL_DRIVER% StartType = 3 ;%SERVICE_DEMAND_START% ErrorControl = 1 ;%SERVICE_ERROR_NORMAL% ServiceBinary = %12%\DM9PCI5.SYS LoadOrderGroup = NDIS [common.EventLog] AddReg = common.AddEventLog.reg [common.AddEventLog.reg] HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll" HKR, , TypesSupported, 0x00010001, 7 ;============================================================================= ; ; DM9102 Win9x specific ; ;============================================================================= [DM9102.win.reg] HKR, , DevLoader, 0, "*ndis" HKR, ,DeviceVxDs , 0, DM9PCI5.SYS HKR, NDIS, LogDriverName, 0, "DM9PCI" HKR, NDIS, MajorNdisVersion, 1, 03 HKR, NDIS, MinorNdisVersion, 1, 0A HKR, , EnumPropPages, 0, "netdi.dll,EnumPropPages" ;HKR,Ndi,NdiInstaller, , "DM9ndi.dll,DM9NdiProc" HKR, Ndi\Interfaces,DefUpper, 0, "ndis3" HKR, Ndi\Interfaces,DefLower, 0, "ethernet" HKR, Ndi\Interfaces,UpperRange, 0, "ndis3" HKR, Ndi\Interfaces,LowerRange, 0, "ethernet" HKR,NDI\params\StoreAndForward,flag,1,20,00,00,00 HKR,NDI\params\TransmitThreshold,flag,1,20,00,00,00 HKR,NDI\params\ACPIEnable,flag,1,20,00,00,00 ;============================================================================= ; ;Ndis driver selection ; ;============================================================================= HKR,Ndi\params\NdisVersion,ParamDesc,,"NDIS Version" HKR,Ndi\params\NdisVersion,default,,0 HKR,Ndi\params\NdisVersion,type,,enum HKR,Ndi\params\NdisVersion\enum,0,,"Auto Selection" HKR,NDI\params\NdisVersion,flag,1,20,00,00,00 [DM9102.hpna.win.reg] HKR,NDI\params\HomeRunPower,flag,1,20,00,00,00 HKR,NDI\params\HomeRunSpeed,flag,1,20,00,00,00 HKR,NDI\params\TxHpnaRemoteCommand,flag,1,20,00,00,00 HKR,NDI\params\RxHpnaRemoteCommand,flag,1,20,00,00,00 HKR,NDI\params\NoiseLevel,flag,1,20,00,00,00 ;============================================================================= ; ; DestinationDirs ; ;============================================================================= [dm9pci.win.CopyFiles] DM9PCI5.SYS [DestinationDirs] DefaultDestDir = 12 DM9PCI.CopyFiles = 12 dm9pci.win.CopyFiles = 11 [SourceDisksNames] 50="10/100 PCI Based Network Drivers Disk",, [SourceDisksFiles] DM9PCI5.sys = 50,,10000 [Strings] V_DSI = "DAVICOM Semiconductor, Inc." DM9102A.DeviceDesc = "DAVICOM DM-9102A PCI Fast Ethernet Adapter " DM9102.DeviceDesc = "DAVICOM 9102/A PCI Fast Ethernet Adapter " DM9EHR.DeviceDesc = "DAVICOM 1/10/100 PCI Fast Ethernet Adapter " DM9ELR.DeviceDesc = "DAVICOM LongRun/10/100 PCI Fast Ethernet Adapter " DM9HR.DeviceDesc = "DAVICOM PCI HomeRun Adapter " DM9LR.DeviceDesc = "DAVICOM PCI LongRun Adapter " DM9GEN.DeviceDesc = "10/100 PCI Fast Ethernet Based Adapter " DM9FSW.DeviceDesc = "DAVICOM 9102A Full Based Switching Adapter " DM9HSW.DeviceDesc = "DAVICOM 9102A Half Based Switching Adapter " DM9009.DeviceDesc = "DAVICOM 10 Base-T PCI Ethernet Adapter " DM9PCI.Service.DispName = "10/100 Mbps PCI Based Network Adapter NT Driver" V_CNET = "CNet Technology, Inc." PRO200WL.DeviceDesc = " CNet PRO200WL PCI Fast Ethernet Adapter " PRO200.DeviceDesc = " CNet PRO200 PCI Fast Ethernet Adapter " PRO200WL.Service.DispName = " CNet PRO200WL PCI Fast Ethernet NT Driver " PRO200.Service.DispName = " CNet PRO200 PCI Fast Ethernet NT Driver " V_ARCHTEK = "Archtek Telecom Co. " DPD110.DeviceDesc = "10/100 Mbps PCI Ethernet Adapter"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.