RELEASE.TXT Driver File Contents (sound_67207_all.exe)

1.00
    . For Logo use.

1.00.20
    . Build from the new DDK architecure
    . Support Hibernate and standby
    . Support MicIn + 20dB boost
    . Fixed the wrong music sound of some MIDI instruments

1.00.40
    . Support Mic2 and 3D feature

1.00.41
    . Fix ACT5.1 testing problem

1.00.42
    . Fix Disabler problem

1.01
    . For Logo use
    . Support AC97 5/6 bits codec volume control

1.01.05
    . Fix ACPI S1/S3 bug
    . Remove the 'Recording' item from Mixer table

1.02
    . For HCT9.5 logo testing
    . Fix ACPI function
    . Add Mic2/20db on playback mixer table
    . Change the default settings of volume control table
    . Fix wavetable volume control bug
    . Fix inf problem
    . Fix RCT #225,#229
    . Fix SVT 630 S3 #8,#9,#11

1.02.01
    . Fix Recording problem
    . Fix 540Ax/Bx ACPI problem

1.02.02
    . Fix HCT9.5 9.17 bug
    . Fix Mixer Line In balance problem
    . Fix 540Ax/Bx revision problem

1.02.03
    . Fix HCT9.5/two machines problem

1.03.00
    . Fix RCT #220, #246
    . Change the default settings of volume control table

1.03.01
    . Update Sub ID
    . Fix volume control bug

1.04.00
    . Update Sub ID
    . Fix RCT #1161, #33(from FAE)
    . Fix FAE #1209, #1168
    . Adjust "3D Depth" and "CD Audio" volume control
    . Adjust CODEC default value from the INF file
    . Add the function of uninstalation  
    . Fix Modem problem

1.04.01
    . Fix "HW MIDI + MPG + Wave + Recording" problem
    . Support HW SRC while VRA doesn't support
    . Fix HCT 9.51 INF checker bug

1.04.02
    . Update Sub ID

1.05.00
    . Fix RCT #251, #274, #279, #281
    . Fix FAE #40, #42
    . Work arround CS4299
    . Change master volume(CODEC register 2) to 5 bits instead of 6 bits
    . Support SPDIF for SSID:1804 SVID:13BD
    . Fix "HW MIDI + MPG + Wave + Recording" problem
    . Support Realtek library while using Reaktek CODEC

1.05.01
    . Update Sub ID
    . Fix Inf checker broblem

1.05.03
    . Fix Inf problem

1.05A
    . Support SPDIF for Crystal CODEC
    . Update Sub ID

1.06.00
    . Fix HW MIDI problem
    . Fix the system hung for 730s while recording
    . Work arroud CS4201 while system initialization
    . Support MonoOut on mixer panel
    . Fix INF instalation problem
    . Support Linear control for Master volume(just for UniWell).
    . Fix the probelm of the negotiation with SW Modem.
    . Support recording Muted( just for sony).
    . Fix the problem that CD can't silent while S1 .
    . Update Sub ID.
    . Disable Mic boost setting(just for Sony).
    . Disable 3D Depth from the Mixer panel(just for Sony).

1.06.01
    . link realtek library by realtek CODEC

1.06.02(alpha)
    . Work around mediabar problem

1.07.00
    . Update Sub ID.
    . SPDIF SCMS ( Serial Copy Management System).
    . Support SW SRC
    . Support 5.1 Channels
    . Update realtek library
    . Update Uninst2k.exe
    . Fix SPDIF problem for S3 and S1
    . Cancel the "Recording Mute" function for sony

1.07.01
    . Fix PC99Audio problem in WHQL

1.07.02
    . Update Sub ID.
    . Fix Quality problem in WHQL
    . Change the control method for switching 2/6 channels
    . Fix the noise problem of the LFE/Center channels
    . Fix the blue-screem problem in Win DVD 

1.07.03
    . Support special GPIO for ASUS to reduce noise by Cold reset
    . Support Linear control for Master volume(for AlphaTop).
    . Support SPDIF (for Clevo)

1.08
    . Support Mono out for Shuttle
    . Fix 4201 Recorder problem
    . Support codec SPDIF and disable Line/Aux/Phone for Trigem
    . Fix MD recording problem from MPlayer7/Digital CD through SPDIF
    . Disable Phone and Mic+20dB for ASUS
    . Support SPDIF for GigaByte
    . Support 6 channel for GVC
    . Disable all Mic2 function except IBM/USI
    . Disable Phone/PCBeep & default value & pin name for Sony

1.09
    . Remove Trigem 6channel support
    . Fix GVC 6 channel problem
    . Add AC3 function support for USI&IBM 730 
    . Add AC3 function support for Alphatop
    . Fix fullduplex problem on 730 
    . Support RealTek new sound function 
    . Support ASUS 8032 and 80e2 
    . Support Uniwell 5006 and 5007
    . Fix uninstall problem on WinMe
    . Fix long delay time problem when first boot
    . Fix recording noise problem when fullduplex play and record
    . Fix Pin initialization problem

1.10
    . Support CMedia 4 channel codec 
    . Fix ViaVoice problem
    . Fix wavetable saturation noise problem
    . Disable 3D function for GigaByte A000/1458 model
    . Disable Phone for UniWill
    . Add A164270F & A183270F model support
    . Support Conexant Codec
    . Change recording gain to 3 dB for Mitac 01B6/1014 model

1.10.02
    . Add SVID:1019, SSID:0A08,0A14,0A37,0A38,0A39,0A40,0A41,0A42,0A43,0A44,0A45,0A46
    . Change Record gain default to 0404 for SiS7018
    . Fix CMedia HCT9.6 DRM problem
    . Fix HCT 44k full-duplex problem for no VRA codec

1.10.03
    . Fix CMedia AuxIn problem
    . Fix Software SRC problem

1.11.00
    . Fix Conexant CNR card problem
    . Fix CMedia 4 channel looping noise problem
    . Uniwill(1584) 5001~5005 : Mute & disable Aux/Video/Line pin
    . Add SVID 16cd
	. SSID 0850 : SPDIF + Mic2
	. SSID 0851 : No SPDIF + Mic2
	. SSID 0852 : SPDIF , No Mic2
	. SSID 0853 : No SPDIF, No Mic2
    . Add ECS SVID/SSID : 1019/0542
    . Add AC3 function for NEC SVID/SSID : 1631/2005 
    . Add AC3 function for Mictac SVID/SSID: 1071/7120
    . Fix SPDIF bug on PowerDVD

1.11b
    . Add Mitac SVID/SSID ; 1071/7522

1.11c
    . Workaround master volume mute for ECS
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.18