***********************************************************************
WINDOWS NT DRIVER SETUP INFORMATION
for
Trident 93xx/94xx/96xx Users
***********************************************************************
Windows NT Device Drivers Version 1.20 Nov 12, 1996
***********************************************************************
Contents
1.0 Introduction
2.0 Supported Resolutions
3.0 Installation Notes for Windows NT Version 4.0
*****************************
1.0 Introduction
This Accelerate Driver runs on the following products:
9440, 9470, 96XX, 93XX with PCI or VESA local bus.
The Graphics Device Drivers supplied here are for the Microsoft
Windows NT operating system version 4.0.
*****************************
2.0 Supported Modes
This Driver supports resolution up to 1600x1200, and color depth
up to True color (24 or 32 BPP).
****************************
3.0 Installation Notes for Windows NT
This driver package containing:
- TGIULNT.SYS (Trident linear addressing video miniport driver)
- TGIUL40.DLL (Trident 256/64K/16M colors accelerated video display driver)
- TRIDENT.INF (setup files used by Windows NT Setup program)
- TDISPLUS.DLL (Trident display control utility)
- TDISPLUS.HLP (Help File for TDISPLUS.DLL)
- README (This README file for Windows NT Version 4.0)
Windows NT drivers are included on Disk #2 of this package. They are
located in the \NT40 sub-directory.
Procedure:
1. Run the Windows NT display Setup program located in the Control Panel, Main
group.
2. Select "Change Display Type..." button from the Display Settings options.
3. Select "Change..." button from the Display Type options.
4. Select "Other..." button from the Select Device options.
5. Windows NT will prompt you for the correct path. Enter A:\NT40 if disk 2
is loaded in drive A:.
6. Choose "Trident Accelerator" from the
list of drivers.
7. Restart Windows NT. Windows NT will start up with 640x480x256 mode
using the Trident drivers.
8. Choose desired resulotion, color depth and refresh rate from the
Display Setting applet, and click OK.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.