LAN Server 4.0 Introduction: ------------- This document describes the procedure to install NDIS driver on DOS LAN Requester and OS/2 LAN server 4.0 for Realtek RTL8029 PCI ethernet adapter. Location of Driver: \NDIS\DOS\LAN_S4\PCIND.DOS (for DOS LAN Services) \NDIS\OS2\PCIND.OS2 (for OS/2 LAN Server) Installing driver procedure on DOS LAN Requester : -------------------------------------------------- Before you start with the installation process, make sure that DOS LAN Services is properly installed. Similarly, your adapter should also be properly installed in your client PC. 1. Copy PCIND.DOS from your Driver diskette (A:\NDIS\DOS\LAN_S4) to DOS LAN Services subdirectory C:\DLS . 2. Under DOS LAN Requester subdirectory C:\DLS, run INSTALL 3. The screen display some description. If it's correct, move highlight to "The listed options are correct" item ,then press ENTER. 4. Move highlight to "Network Card", then press ENTER. 5. Select "Change driver for network card." item, then press ENTER. 6. Select "Network card not shown in list below..", then press ENTER. 7. Insert the Realtek RTL8029 driver diskette in floppy A,and specify your pathname A:\NDIS\DOS\LAN_S4,then press ENTER. 8. Realtek 8029 driver is now installed on your computer, reboot your computer. NOTES: ------ Parameters for the PROTOCOL.INI file: AdapterID : This keyword is provided by PCIND, and is required when more than one RTL8029 adapters exist on one system. Installing driver procedure on OS/2 LAN Server 4.0: --------------------------------------------------- Before you start with the installation process, make sure that OS/2 LAN Server is properly installed. Similarly, your adapter should also be properly installed in your server. 1. In OS/2 window, Click the "MPTS" icon. 2. The screen will display the IBM Log, press "OK". 3. Select "Install" button. 4. Insert the REALTEK RTL8029 driver diskette, specify the driver path A:\NDIS\OS2 and press <Enter>. 5. When complete above step to load PCIND.OS2 into OS/2 system, then configure your system. 6. The same step as step 3, select "Configure" button. 7. The screen will display "Configure" dialog box and select "LAN adapters and protocols" then press "configure" button. 8. The screen will display "LAPS Configuration" dialog box, move highlight to "RTL8029 PCI Ethernet Adapter" item in "Network Adapter" window, and select "NetBios" protocol. Press "OK". 9. Installation is complete now. Reset your PC by turning it off and on.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.