MSNT40.TXT Driver File Contents (RealtekESL-835-TB.zip)

   Windows NT 4.0

   Installing driver:     ( Location of Driver:     \WINNT40\ESL835.SYS )
   -----------------
   1. In the Main group of NT, select the "Control Panel"->" Network "
      -> " Add Adapter " -> " Have Disk " .

   2. Insert the ESL835 driver disk in drive A, enter drive and pathname
      A:\ which is the path  where  the  driver  ESL835.SYS  and setup
      file OEMSETUP.INF are located, and then choose the OK button.

   3. The screen will appear "Input EtherID" dialog box which is provide
      by  ESL835.SYS  driver. This option is only required when you have
      more  than  one  ENCORE ESL835 PCI LAN adapters on this computer .
      Select SKIP if only one adapter is installed on this computer.

   4. "Bus Location"  display in next screen.  Your machine contains more
      than one hardware bus, please select the Bus Type and Bus number on
      which  your network adapter card is installed.

   5. NT will then perform the binding process.  If any additional network
      software options were installed,  you may be  prompted for  specific
      information for these packages.

   6. Restarting your system you will acquire network service.

   NOTES:
   ------
      *  Installing Multiple LAN Adapters:
         Enter Windows NT and follow above setup procedure step 2,in the
         "Network Settings" dialog box, choose the "Configure.." button.
         The "Input Ethernet ID"  dialog box appears and input adapter's
         Ethernet ID. Last step to select OK and close NETWORK SETUP.
         Select SKIP if only one adapter is installed on this computer.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.24