1. 245030.exe Driver
2. WIN95.TXT File Contents

WIN95.TXT Driver File Contents (245030.exe)

Windows 95
This is an ASCII file called WIN95.TXT in the ATI 
CardAssistant INFO directory. Use a text editor or a 
word processor with a mono-space font such as Courier 
to print this file if needed for reference.

************************************************************
************************************************************
**                                                        **
**       Installing the AT-2450 Driver on Windows 95      **
**                                                        **
************************************************************
************************************************************

------------------------------------------------------------
--                          Contents                      --
------------------------------------------------------------
I.    Special Considerations 
II.   Installing the AT-2450 with Windows 95 
III.  Removing an Existing Driver 

Note: AS DESCRIBED IN SECTION II BELOW, RUN THE CLEAN95 
      UTILITY ON THE CARDASSISTANT DISKETTE BEFORE 
      INSERTING THE AT-2450 ADAPTER CARD IN THE COMPUTER. 


I.  Special Considerations 
==========================

To configure the cable media, to change to full-duplex mode 
(with a full-duplex hub), or to run Diagnostics, use the 
CardAssistant setup program, SETUP24.EXE. The SETUP24 
utility only runs on DOS. To enter DOS mode in Windows 95, 
reboot and press F8 when the "Starting Windows 95" message 
appears. Select the Command prompt only option (#6). See 
manual for details. 

To de-install the driver, use the remove driver option from 
your Windows 95 Network Control Panel. See "III. Removing 
an Existing Driver".

II. Installing the AT-2450 with Windows 95
==========================================

1. With Windows 95 installed as per Microsoft installation 
   instructions, insert the Allied Telesyn CardAssistant 
   diskette in the floppy drive.

2. Double click the computer icon in the upper left-hand 
   corner of the screen. 

3. Double click the 3.5" diskette icon. 

4. Double click the CLEAN95.EXE icon. 

5. Click the Install Drivers button. Check for the message: 
   "Driver installation successfully completed." Click the 
   OK button.

6. Shutdown Windows 95, power off your computer, install 
   your AT-2450 card, and reboot your system.

7. Windows 95 finds the PCI adapter card. If prompted by 
   Windows 95, insert the Windows setup CD-ROM disc or 
   the floppy diskette(s). 

8. Reboot the computer into Windows 95 as prompted. 
   Windows 95 will complete the driver installation process.


III. Removing an Existing Driver
================================

1. From the "My Computer" icon, choose "Control Panel". 
   Then choose "Network".

2. From the "Network" dialog box, select the adapter to 
   remove. Then choose "Remove".

3. Do Not Shutdown or Restart Windows 95 at this time. 
   To install the AT-2450 driver, complete the steps listed 
   in section II.

**END**

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.