1. filer_Ess1868.swt.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (filer_Ess1868.swt.zip)

        ES1868 ESSWT Installation Instructions:

        [1]     DirectX is needed to run the software wavetable.  Ensure
                that DirectX 3.0, or higher, is installed in the system.
                For a copy of DirectX, please contact Microsoft Corp.

        [2]     a) Upgrading The ES1868 drivers, skip to step 3.
                b) Istalling the sound card for the first time,
                install the sound card in an appropriate slot.  Power up
                the system, and insert the ES1868 ESSWT driver disk 
                (CD-Rom disk).  When prompted for the driver, redirect 
                the system to look for the appropriate drivers in the 
                CD-Rom drive. Skip to step 6.

        [3]     Upgrading the ES1868 drivers:
                a)  Go to "System Properties", select "Device Manager"
                b)  Go to "Sound, video and game controllers", select 
                    "ES1868 Plug and Play AudioDrive".
                    Note:  If you had chosen "ES1868 Control Interface",
                           please exit immediately and restart the 
                           process from Step 3a.  
                c)  Go to "Properties", go to "Driver", select 
                    "Update Driver"
                d)  Select "Yes" to allow the system to search for the 
                    driver(s)
                e)  Select "Other locations", type in "D:\" (or your 
                    designated CD-Rom drive). Select "Ok", "Finish"
                f)  If you are prompted for a driver disk, Key in "D:\" 
                    for all the files to be copied from the CD-Rom
                g)  Close System Properties, reboot system. 
                    Skip to step 6

        [4]     a)  Remove ES1868 driver image(s) from 
                    REGEDIT->HKEY_LOCAL_Machine->Emun->ISAPNP
                b)  EXIT Windows to get to DOS mode.  Remove existing 
                    ESS drivers from c:\win95\system using "del es*.*".
                c)  Remove OEM*.inf from c:\win95\inf (if using older 
                    versions of Win95 OS), or remove ESSOEM*.inf from 
                    c:\win95\inf\other (if using newer version of 
                    Win95 OS)
        
        [5]     Reboot the system. Perform a new driver installation
                (Step 2b).

        [6]     Done. You can verify the presence of the software 
                wavetable from System Properties.
                Note:   If there is still no audio after you complete
                        the process, skip to step 4