;****************************************************************************
; OEMSETUP.INF - 3Com Megahertz LAN PC Card (589) Windows NT Setup File
;----------------------------------------------------------------------------
; Revision History
; 1.0 Release for 589E 07/02/98 (MS)
; 1.1 Fixed HQ37 07/08/98 (MS)
; 1.2 Fixed HQ45 Add FullDuplex Key 07/10/98 (MS)
; 1.3 Add Transceiver and Network list 07/16/98 (MS)
; 1.4 Fixed HQ82 - remove TouchDown 07/16/98 (MS)
; 1.5 Change BOM 07/21/98 (MS)
; 1.6 add device type 07/30/98 (ML)
; 1.7 Fix HQ10 - update driver problem 08/07/98 (MS)
; 1.8 Fix HQ43 - Copy TCAUM589.HLP to WinDir 08/12/98 (MS)
; 1.9 Fix HQ63 - Ask TCAUM589.HLP in \I386 08/21/98 (MS)
; 2.0 Fix HQ67 - Copy TCAUM589.HLP problem 08/25/98 (MS)
; %VER 2.1 Fix HQ71 - Remove Diagnostics 08/27/98 (MS)
;****************************************************************************
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
PCMCIA
PCI
"Jazz-Internal Bus"
[Options]
el3c589
[OptionsTextENG]
el3c589 = "3Com Megahertz LAN PC Card (Ethernet)"
[AllFileConstants]
GenericInfVersion = " v1.00"
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
;;TrayIconExe = "TCASUTI.EXE"
;;InstallerExe = "TCAUDIAG.EXE"
UninstallExe = "UN3C589A.EXE"
UnInstallName = "3Com PC Card Diagnostics Utilities"
Manufacturer = "3Com"
[FileConstants-el3c589]
GenericAdapterName = "3Com Megahertz LAN PC Card (Ethernet)"
GenericDriverName = "3Com Megahertz LAN PC Card (Ethernet)"
;GenericSysName = "EL589ND3.SYS"
GenericName = "el3c589"
ProductMajorVersion = "3"
ProductMinorVersion = "51"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "el3c589"
ProductSoftwareDescription = "3Com Megahertz LAN PC Card (Ethernet)"
;ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType = "el3c589Sys ndisDriver el3c589Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """el3c589Sys"" yes no container"
NetRuleSoftwareClass = {"el3c589Driver basic"}
NetRuleSoftwareBindable = {"el3c589Driver el3c589Adapter non exclusive 100"}
ProductHardwareName = "el3c589"
ProductHardwareDescription = "3Com Megahertz LAN PC Card (Ethernet)"
NetRuleHardwareType = "el3c589 el3c589Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"el3c589Adapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
;;ProductSWKey = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
VERS1Manufacturer = "3Com"
VERS1Product = "3Com Megahertz LAN PC Card"
VERS1Type = "el3c589-EtherLink"
PCMCIA = 1
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
DIAGCARDTYPE = "TCAUM589"
NT350VersionConstant = "3.50"
NT310VersionConstant = "3.10"
NT400VersionConstant = "(4.0)"
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Status = STATUS_FAILED
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
Set !DebugOutputControl = 1
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms AllFileConstants
read-syms FileConstants"-"$(Option)
read-syms DialogConstants$(!STF_LANGUAGE)"-"$(Option)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms AllFileConstants$(!STF_LANGUAGE)
read-syms FileConstants$(!STF_LANGUAGE)"-"$(Option)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
set CurrentVersionValue = ""
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt
Ifstr(i) $(KeyNt) != ""
GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue
Debug-Output "$(InfFile) $(Option): WinNT CurrentVersion ="$(CurrentVersionValue)
CloseRegKey $(KeyNt)
Endif
;; NT v4.00 has NDIS4
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
set NDIS_DISK_A = NDIS
set NDIS_VER = NDIS4
set ProductSoftwareImagePath = "\SystemRoot\System32\drivers\EL589ND4.SYS"
else
set NDIS_DISK_A = NDIS
set NDIS_VER = NDIS3
set ProductSoftwareImagePath = "\SystemRoot\System32\drivers\EL589ND3.SYS"
endif
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT310VersionConstant)
Debug-Output "$(InfFile) $(Option): Configureadapter"
set Error = "Windows NT v3.10 is not support by this product"
goto fatal
endif
Set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == update
set StartLabel = upgradesoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set StartLabel = configureadapter
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
; Shradha
; set IRQValue = *($(IRQList), 5)
; set IOBaseAddrValue = *($(IOBaseAddrList), 1)
set IRQValue = *($(IRQList), 9)
set IOBaseAddrValue = *($(IOBaseAddrList), 33)
; Shradha
set DuplexValue = *($(DuplexList), 1)
set TransceiverValue = *($(TransceiverList),1)
set NetworkValue = *($(NetworkList),2)
Set from = $(fatal)
Set to = $(fatal)
Goto $(StartLabel)
installadapter = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set FileToCheck = $($R1)\OEMSETUP.INF
LibraryProcedure FilePresent,$(!LIBHANDLE), CheckFileExistance $(FileToCheck)
Ifstr(i) $(FilePresent) != "YES"
Goto installadapter
Endif
Set SrcDir = $($R1)
install "Install-Dll"
install "Install-Help"
Debug-Output "Install-3nicdiag"
install "Install-3nicdiag"
StartWait
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
Debug-Output "$(InfFile) $(Option): Windows NT 4.00"
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" $(!REG_KEY_ALL_ACCESS) KeyNt
ifstr $(KeyNt) == ""
CreateRegKey $(!REG_H_LOCAL) {"SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" KeyNt
endif
OpenRegKey $(KeyNt) "" "3ComNicUnInstall" $(!REG_KEY_ALL_ACCESS) KeyNt2
ifstr $(KeyNt2) == ""
CreateRegKey $(KeyNt) {"3ComNicUnInstall" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" KeyNt2
endif
;; set NewValueList = {{DisplayName, $(NoTitle), $(!REG_VT_SZ),"3Com PC Card Diagnostics"},+
;; {UninstallString, $(NoTitle), $(!REG_VT_SZ), "UN3C589A.EXE"}}
set NewValueList = {{DisplayName, $(NoTitle), $(!REG_VT_SZ),""},+
{UninstallString, $(NoTitle), $(!REG_VT_SZ), "UN3C589A.EXE"}}
Shell $(UtilityInf), AddValueList, $(KeyNt2), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(KeyNt)
CloseRegKey $(KeyNt2)
endif
EndWait
goto adaptersetup
configureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
Set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
ifstr(i) $(ValueName) == "IoBaseAddress"
set IOBaseAddrIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "FullDuplex"
set DuplexIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "TransceiverType"
set TransceiverIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "DriverOptimization"
set NetworkIndex = $(ValueData)
;Shradha
else-ifstr(i) $(ValueName) == "AdapterName"
set OldAdapterName = $(ValueData)
Debug-Output "<DBG> AdapterName in registry = "$(OldAdapterName)
;Shradha
endif
EndForListDo
set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex)))
ifstr(i) $(IRQValue) == ""
set IRQValue = *($(IRQList), 5)
endif
set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrIndex)))
ifstr(i) $(IOBaseAddrValue) == ""
set IOBaseAddrValue = *($(IOBaseAddrList), 1)
endif
set DuplexValue = *($(DuplexList), ~($(DuplexValues),$(DuplexIndex)))
ifstr(i) $(DuplexValue) == ""
set DuplexValue = *($(DuplexValues), 1)
endif
set TransceiverValue = *($(TransceiverList), ~($(TransceiverValues),$(TransceiverIndex)))
ifstr(i) $(TransceiverValue) == ""
set TransceiverValue = *($(TransceiverValues), 1)
endif
set NetworkValue = *($(NetworkList), ~($(NetworkValues),$(NetworkIndex)))
ifstr(i) $(NetworkValue) == ""
set NetworkValue = *($(NetworkValues), 2)
endif
adaptersetup = +
LoadLibrary "disk 1" $(DialogDllName) hLib
read-syms FileDependentDlg$(!STF_LANGUAGE)"-"$(Option)
set ENABLER = 0
ui start "InputDlg" $(hLib)
set ExitButton = $(ButtonPressed)
FreeLibrary $(hLib)
ifstr(i) $(DLGEVENT) == "CONTINUE"
set IOBaseAddrIndex = $(Combo1Out)
set IRQValueIndex = $(Combo2Out)
set DuplexIndex = $(Combo3Out)
set TransceiverIndex = $(Combo4Out)
set NetworkIndex = $(Combo5Out)
set ExitButton = $(ButtonPressed)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "EXIT"
set CommonStatus = STATUS_USERCANCEL
ui pop 1
goto end
else
set CommonStatus = STATUS_USERCANCEL
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
skipoptions = +
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
writeparameters = +
set BusTypeNum = 1
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
;
; For 589E card
;
Debug-Output "$(InfFile) $(Option): Write Pcmcia database"
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com\Megahertz 589E" $(MAXIMUM_ALLOWED) MyPcmciaHandle
Ifstr $(MyPcmciaHandle) == $(KeyNull)
Debug-Output "CreatRegKey (589E)"
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com" $(MAXIMUM_ALLOWED) MyPcmciaHandle
Ifstr $(MyPcmciaHandle) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase" $(MAXIMUM_ALLOWED) MyPcmciaKey
CreateRegKey $(MyPcmciaKey) {"3Com",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle
CloseRegKey ($MyPcmciaKey)
endif
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com" $(MAXIMUM_ALLOWED) MyPcmciaKey
CreateRegKey $(MyPcmciaKey) {"Megahertz 589E",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle
CloseRegKey ($MyPcmciaKey)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com\Megahertz 589E" $(MAXIMUM_ALLOWED) MyPcmciaHandle
endif
set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),"el3c589"},{DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"}}
Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList)
Debug-Output "<DBG> AddValueList - Driver:REG_SZ:el3c589"
CloseRegKey $(MyPcmciaHandle)
;
; For 3C589D card
;
Debug-Output "$(InfFile) $(Option): Write Pcmcia database"
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation\3C589D" $(MAXIMUM_ALLOWED) MyPcmciaHandle
Ifstr $(MyPcmciaHandle) == $(KeyNull)
Debug-Output "CreatRegKey (3C589D)"
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation" $(MAXIMUM_ALLOWED) MyPcmciaHandle
Ifstr $(MyPcmciaHandle) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase" $(MAXIMUM_ALLOWED) MyPcmciaKey
CreateRegKey $(MyPcmciaKey) {"3Com Corporation",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle
CloseRegKey ($MyPcmciaKey)
endif
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation" $(MAXIMUM_ALLOWED) MyPcmciaKey
CreateRegKey $(MyPcmciaKey) {"3C589D",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle
CloseRegKey ($MyPcmciaKey)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation\3C589D" $(MAXIMUM_ALLOWED) MyPcmciaHandle
endif
set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),"el3c589"}}
Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList)
Debug-Output "<DBG> AddValueList - Driver:REG_SZ:el3c589"
CloseRegKey $(MyPcmciaHandle)
;
; For 3C589A, 3C589B, and 3C589C cards
;
Debug-Output "$(InfFile) $(Option): Write Pcmcia database"
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation\3C589" $(MAXIMUM_ALLOWED) MyPcmciaHandle
Ifstr $(MyPcmciaHandle) == $(KeyNull)
Debug-Output "CreatRegKey (3C589)"
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation" $(MAXIMUM_ALLOWED) MyPcmciaHandle
Ifstr $(MyPcmciaHandle) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase" $(MAXIMUM_ALLOWED) MyPcmciaKey
CreateRegKey $(MyPcmciaKey) {"3Com Corporation",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle
CloseRegKey ($MyPcmciaKey)
endif
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation" $(MAXIMUM_ALLOWED) MyPcmciaKey
CreateRegKey $(MyPcmciaKey) {"3C589",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle
CloseRegKey ($MyPcmciaKey)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation\3C589" $(MAXIMUM_ALLOWED) MyPcmciaHandle
endif
set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),"el3c589"}}
Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList)
Debug-Output "<DBG> AddValueList - Driver:REG_SZ:el3c589"
CloseRegKey $(MyPcmciaHandle)
set IRQValue = *($(IRQValues), ~($(IRQList), $(IRQValueIndex)))
set IOBaseAddrValue = *($(IOBaseAddrValues),~($(IOBaseAddrList), $(IOBaseAddrIndex)))
set DuplexValue = *($(DuplexValues), ~($(DuplexList), $(DuplexIndex)))
set TransceiverValue = *($(TransceiverValues), ~($(TransceiverList),$(TransceiverIndex)))
set NetworkValue = *($(NetworkValues), ~($(NetworkList),$(NetworkIndex)))
;Shradha
ifstr $(OldAdapterName) == ""
Debug-Output "<DBG> setting OldAdapterName"
set OldAdapterName = $(ProductHardwareName)$(AdapterNumber)
endif
Debug-Output "<DBG> OldAdapterName = "$(OldAdapterName)
;Shradha
set NewValueList = {{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{MediaType, $(NoTitle),$(!REG_VT_DWORD),1},+
{BusType, $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{BusNumber, $(NoTitle),$(!REG_VT_DWORD),0},+
{FullDuplex, $(NoTitle),$(!REG_VT_DWORD),$(DuplexValue)},+
{TransceiverType, $(NoTitle),$(!REG_VT_DWORD),$(TransceiverValue)},+
{DriverOptimization, $(NoTitle),$(!REG_VT_DWORD),$(NetworkValue)},+
{CardType, $(NoTitle),$(!REG_VT_DWORD),0},+
{AdapterType, $(NoTitle),$(!REG_VT_DWORD),259},+
{OSType, $(NoTitle),$(!REG_VT_DWORD),1},+
;Shradha
;{Pcmcia, $(NoTitle),$(!REG_VT_DWORD),1}+
{SoftexPcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+
{AdapterName,$(NoTitle),$(!REG_VT_SZ),$(OldAdapterName)}+
;Shradha
}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndWait
goto successful
bindingadapter = +
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
Debug-Output "$(InfFile) $(Option): Windows NT 4.00 remove icon"
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" $(!REG_KEY_ALL_ACCESS) KeyNt
set TrayIconList = TCASUTIEXE
DeleteRegValue $(KeyNt) $(TrayIconList)
CloseRegKey $(KeyNt)
endif
; Shradha
;RunProgram ExitCode "Windows Directory" "" UN3C589A.EXE "-inf"
; Shradha
goto end
upgradesoftware = +
install "Install-Option"
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
ifstr(i) $(!UG_Filename) != ""
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
ifint $(Version) != $(ProductVersion)
endif
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
else
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
$(MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
OpenRegKey $(NetworkCardKey) "" "NetRules" +
$(MAXIMUM_ALLOWED) NetRuleKey
Ifstr(i) $(NetRuleKey) != $(KeyNull)
else
goto fatalregistry
endif
CloseRegKey $(NetRules)
CloseRegKey $(NetworkCardKey)
else
goto fatalregistry
endif
OpenRegKey $(!REG_H_LOCAL) "" +
$(!NTN_ServiceBase)"\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
Ifstr(i) $(ServiceKey) != $(KeyNull)
CloseRegKey $(ServiceKey)
else
goto fatalregistry
endif
endif
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[DebugConfiguration]
Set InfName = "OEMSETUP.INF"
return
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
; Shradha
;AddSectionFilesToCopyList Files-NDIS $(SrcDir)ndis $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-NDIS $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
; Shradha
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-3nicdiag $(SrcDir)ndis $(!STF_WINDOWSSYSPATH)
;; AddSectionFilesToCopyList Files-HwDll $(SrcDir)WINNT $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-NDIS $(SrcDir)ndis $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-Dll]
set STF_VITAL = ""
; Shradha
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
; Shradha
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-3nicdiag]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-3nicdiag $(SrcDir)ndis $(!STF_WINDOWSSYSPATH)
;; AddSectionFilesToCopyList Files-HwDll $(SrcDir)WINNT $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
;;[Install-TrayAndCpl]
;; set STF_VITAL = ""
;; AddSectionFilesToCopyList Files-TrayAndCpl $(SrcDir)win32 $(!STF_WINDOWSSYSPATH)
;; set !STF_NCPA_FLUSH_COPYLIST = TRUE
;; CopyFilesInCopyList
;; Exit
[Install-Help]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Help $(SrcDir) $(!STF_WINDOWSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Source Media Descriptions]
1 = "Windows NT Setup Disk #1"
2 = "3Com Megahertz LAN PC Card Installation Disk"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
2, OEMSETUP.INF, SIZE=60000, RENAME=$(!UG_Filename)
[Files-Dll]
2, El3c589.DLL, SIZE=50000
[Files-3nicdiag]
; Shradha
;2,UN3C589A.EXE, SIZE=100000
; Shradha
;2,TCAUM589.HLP, SIZE=80000
[Files-NDIS]
2,EL589ND4.SYS , SIZE=60000
; Shradha
;2,EL589ND3.SYS , SIZE=60000
; Shradha
;[Files-HwDll]
;2,TCAMHWAC.DLL, SIZE=90000
;2,TCAICCHG.SYS, SIZE=9000
;[Files-TrayAndCpl]
;2,TCASUTI.EXE, SIZE=10000
[Files-Help]
; Shradha
;2,TCAUM589.HLP, SIZE=80000
; Shradha
[LanguagesSupported]
ENG
[AllFileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
DialogDllName = "El3c589.DLL"
[FileConstantsENG-el3c589]
FunctionTitle = $(GenericAdapterName)" Setup"$(GenericInfVersion)
ProductSoftwareTitle = $(GenericDriverName)
ProductHardwareTitle = $(GenericAdapterName)
IRQList = ^(IRQChoices, 1)
IRQValues = ^(IRQChoices, 2)
InterruptStyleValues = ^(InterruptStyleChoices, 2)
IOBaseAddrList = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues = ^(IOBaseAddrChoices, 2)
DuplexList = ^(DuplexChoices, 1)
DuplexValues = ^(DuplexChoices, 2)
TransceiverList = ^(TransceiverChoices, 1)
TransceiverValues = ^(TransceiverChoices, 2)
NetworkList = ^(NetworkChoices, 1)
NetworkValues = ^(NetworkChoices, 2)
[DialogConstantsENG-el3c589]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG-el3c589]
DlgType = "RadioCombination"
DlgTemplate = "el3c589"
Caption = $(FunctionTitle)
HelpContext = $(!IDH_DB_OEMNADE2_INS)
CBOptionsGreyed = {}
NotifyFields = {NO, NO, NO, NO}
Combo1Label = "I/O Port:"
Combo2Label = "Interrupt:"
Combo3Label = "Full Duplex:"
Combo4Label = "Transceiver Type:"
Combo5Label = "Driver Optimization:"
Combo1List = $(IOBaseAddrList)
Combo1Out = $(IOBaseAddrValue)
Combo2List = $(IRQList)
Combo2Out = $(IRQValue)
Combo3List = $(DuplexList)
Combo3Out = $(DuplexValue)
Combo4List = $(TransceiverList)
Combo4Out = $(TransceiverValue)
Combo5List = $(NetworkList)
Combo5Out = $(NetworkValue)
ComboListItemsIn = {Combo1List,Combo2List,Combo3List,Combo4List,Combo5List}
ComboListItemsOut = {Combo1Out,Combo2Out,Combo3Out,Combo4Out,Combo5Out}
EditTextIn = {"",""}
EditTextLim = {"",""}
[IRQChoices]
IRQ_1 = "3",3
IRQ_2 = "5",5
IRQ_3 = "7",7
IRQ_4 = "9",9
IRQ_5 = "10",10
IRQ_6 = "11",11
IRQ_7 = "12",12
IRQ_8 = "15",15
; Shradha
IRQ_9 = "Auto",0
; Shradha
[DuplexChoices]
DUP_1 = "Disabled",0
DUP_2 = "Enabled",1
[TransceiverChoices]
TRAN_1 = "Auto Select",0
TRAN_2 = "TP (RJ-45)",1
TRAN_3 = "Coax (BNC)",2
[NetworkChoices]
NET_1 = "DOS Client",16
NET_2 = "Windows & OS/2 Client",32
NET_3 = "Server",48
[IOBaseAddrChoices]
IOBase_1 = "0x300",768
IOBase_2 = "0x200",512
IOBase_3 = "0x210",528
IOBase_4 = "0x220",544
IOBase_5 = "0x230",560
IOBase_6 = "0x1E0",480
IOBase_7 = "0x250",592
IOBase_8 = "0x260",608
IOBase_9 = "0x270",624
IOBase_10 = "0x280",640
IOBase_11 = "0x290",656
IOBase_12 = "0x2A0",672
IOBase_13 = "0x2B0",688
IOBase_14 = "0x2C0",704
IOBase_15 = "0x2D0",720
IOBase_16 = "0x2E0",736
IOBase_17 = "0x2F0",752
IOBase_18 = "0x310",784
IOBase_19 = "0x320",800
IOBase_20 = "0x330",816
IOBase_21 = "0x340",832
IOBase_22 = "0x350",848
IOBase_23 = "0x360",864
IOBase_24 = "0x370",880
IOBase_25 = "0x380",896
IOBase_26 = "0x390",912
IOBase_27 = "0x3A0",928
IOBase_28 = "0x3B0",944
IOBase_29 = "0x3C0",960
IOBase_30 = "0x3D0",976
IOBase_31 = "0x1F0",496
IOBase_32 = "0x3F0",1008
; Shradha
IOBase_33 = "Auto",0
; Shradha
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.