[Identification]
OptionType = SCSI
[LanguagesSupported]
ENG
[Options]
"ADAPTEC" = 18NT40
[OptionsTextENG]
"ADAPTEC" = "Adaptec APA-1480 CardBus SCSI Controller (NT 4.0)"
[MiniportDrivers]
18NT40 = !SERVICE_KERNEL_DRIVER, "SCSI Miniport", !SERVICE_ERROR_NORMAL, 1, %SystemRoot%\System32\IoLogMsg.dll , 7
[AdaptecInstall]
; <ID> = REGISTRY_KEY
18NT40 = apa1480
;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION: To verify that this INF deals with the same type of options
; as we are choosing currently.
;
; INPUT: None
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
; $($R1): Option Type (COMPUTER ...)
; $($R2): Diskette description
;---------------------------------------------------------------------------
[Identify]
;
;
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
;
;
; INPUT: $($0): Language used. ( ENG | FRN | ... )
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE
; STATUS_FAILED
;
; $($R1): Option List
; $($R2): Option Text List
;------------------------------------------------------------------------
[ReturnOptions]
;
;
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
goto returnoptions
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
;
; form a list of all the options and another of the text representing
;
returnoptions = +
set OptionList = ^(Options, 0)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;
; 3. InstallOption:
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;
[InstallOption]
;
; Set default values for
;
set Status = STATUS_FAILED
set DrivesToFree = {}
;
; extract parameters
;
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
;
; Get Adaptec Symbols
;
read-syms AdaptecInstall
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
else
set Status = STATUS_NOLANGUAGE
goto finish_InstallOption
endif
read-syms Strings$($0)
;
; check to see if Option is supported.
;
set OptionList = ^(Options, 0)
ifcontains $(Option) in $(OptionList)
else
Debug-Output "SCSI.INF: SCSI option is not supported."
goto finish_InstallOption
endif
set OptionList = ""
;
; Option has been defined already
;
set MiniportDriver = #(Options, $(Option), 1)
set Type = $(#(MiniportDrivers, $(MiniportDriver), 1))
set Group = #(MiniportDrivers, $(MiniportDriver), 2)
set ErrorControl = $(#(MiniportDrivers, $(MiniportDriver), 3))
set Tag = #(MiniportDrivers, $(MiniportDriver), 4)
set EventMessageFile = #(MiniportDrivers, $(MiniportDriver), 5)
set TypesSupported = #(MiniportDrivers, $(MiniportDriver), 6)
;; nishi 9/2/97
;; set Start = $(!SERVICE_BOOT_START)
set Start = $(!SERVICE_SYSTEM_START)
;; nishi
installtheoption = +
;
; Code to add files to copy list
;
ifstr(i) $(AddCopy) == "YES"
set DoActualCopy = NO
set FileToCheck = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\drivers\"$(FileToCheck)
ifstr(i) $(STATUS) == NO
set DoActualCopy = YES
endif
ifstr(i) $(DoActualCopy) == NO
shell "subroutn.inf" DriversExist $($0) $(String1)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "SCSI.INF: shelling DriversExist failed"
goto finish_InstallOption
endif
ifstr(i) $($R0) == STATUS_CURRENT
else-ifstr(i) $($R0) == STATUS_NEW
set DoActualCopy = YES
else-ifstr(i) $($R0) == STATUS_USERCANCEL
Debug-Output "SCSI.INF: User cancelled SCSI installation"
goto finish_InstallOption
else
Debug-Output "SCSI.INF: Error reported in DriversExist routine in SUBROUTN.INF"
goto finish_InstallOption
endif
endif
ifstr(i) $(DoActualCopy) == YES
; ifstr(i) $(SrcDir) == "a:\"
shell "subroutn.inf" DoAskSourceEx $(SrcDir) $(String2)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "SCSI.INF: shelling DoAskSourceEx failed"
goto finish_InstallOption
endif
ifstr(i) $($R0) == STATUS_SUCCESSFUL
set SrcDir = $($R1)
ifstr(i) $($R2) != ""
set DrivesToFree = >($(DrivesToFree), $($R2))
endif
else
Debug-Output "SCSI.INF: User cancelled asking source."
goto finish_InstallOption
endif
; endif
install Install-AddCopyOption
ifstr(i) $(STF_INSTALL_OUTCOME) != "STF_SUCCESS"
Debug-Output "Adding SCSI files to copy list failed"
goto finish_InstallOption
endif
else
set DoCopy = NO
endif
endif
ifstr(i) $(DoCopy) == "YES"
read-syms ProgressCopy$($0)
install Install-DoCopyOption
ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_FAILURE"
Debug-Output "Copying files failed"
goto finish_InstallOption
else-ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_USERQUIT"
set Status = STATUS_USERCANCEL
goto finish_InstallOption
endif
endif
ifstr(i) $(DoConfig) == "YES"
;
; first run a privilege check on modifying the setup node
;
shell "registry.inf" CheckSetupModify
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto finish_InstallOption
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
goto finish_InstallOption
endif
;
; then make a new SCSI entry, the entry is created automatically
; enabled
;
set ServiceNode = #(AdaptecInstall, $(MiniportDriver), 1)
set ServiceBinary = System32\drivers\#(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
set ServicesValues = { +
{Type, 0, $(!REG_VT_DWORD), $(Type) }, +
{Start, 0, $(!REG_VT_DWORD), $(Start) }, +
{Group, 0, $(!REG_VT_SZ), $(Group) }, +
{ErrorControl, 0, $(!REG_VT_DWORD), $(ErrorControl) }, +
{Tag, 0, $(!REG_VT_DWORD), $(Tag) }, +
{BinaryPathName, 0, $(!REG_VT_EXPAND_SZ), $(ServiceBinary) } +
}
;; nishi
set ParametersValues = ""
;; set ParametersValues = "Parameters"
;;nishi
set DeviceValues = {}
set EventLogValues = { +
{EventMessageFile, 0, $(!REG_VT_EXPAND_SZ), $(EventMessageFile) }, +
{TypesSupported, 0, $(!REG_VT_DWORD), $(TypesSupported) } +
}
shell "registry.inf" MakeServicesEntry $(ServiceNode) +
$(ServicesValues) +
$(ParametersValues) +
$(DeviceValues) +
$(EventLogValues) +
Parameters
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Couldn't execute MakeServicesEntry in registry.inf"
goto finish_InstallOption
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "MakeServicesEntry failed for SCSI"
goto finish_InstallOption
endif
;; nishi
;; add code to add Parameters key and SoftexPcmcia value key here
Debug-Output "nishi 1"
set apa1480KeyName = "System\CurrentControlSet\Services\apa1480"
OpenRegKey $(!REG_H_LOCAL) "" $(apa1480KeyName) $(!REG_KEY_ALL_ACCESS) apa1480KeyHandle
ifstr(i) $(apa1480KeyHandle) != ""
Debug-Output "nishi 2"
CreateRegKey $(apa1480KeyHandle) {"Parameters",0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" ParamKeyHandle
;; nishi change 8/12/97
ifstr(i) $(ParamKeyHandle) == ""
Debug-Output "nishi 5"
OpenRegKey $(apa1480KeyHandle) "" "Parameters" $(!REG_KEY_ALL_ACCESS) ParamKeyHandle
ifstr(i) $(ParamKeyHandle) == ""
Debug-Output "nishi 6"
goto finish_InstallOption
else
;; nishi 10/31/97
;; delete targetids and luns from parameters
EnumRegKey $(ParamKeyHandle) TargetIdInfo
set TargetIdList = {}
ForListDo $(TargetIdInfo)
ifstr(i) $(TargetIdList) == {}
set TargetIdList = {*($($),1)}
else
set TargetIdList = >($(TargetIdList),*($($),1))
endif
EndForListDo
ForListDo $(TargetIdList)
OpenRegKey $(ParamKeyHandle) "" $($) $(!REG_KEY_ALL_ACCESS) TargetKeyHandle
ifstr(i) $(TargetKeyHandle) != ""
EnumRegKey $(TargetKeyHandle) LunInfo
set LunList = {}
ForListDo $(LunInfo)
ifstr(i) $(LunList) == {}
set LunList = {*($($),1)}
else
set LunList = >($(LunList),*($($),1))
endif
EndForListDo
ForListDo $(LunList)
DeleteRegkey $(TargetKeyHandle) $($)
EndForListDo
endif
CloseRegKey $(TargetKeyHandle)
DeleteRegKey $(ParamKeyHandle) $($)
EndForListDo
;; nishi 10/31/97
endif
endif
;; nishi change 8/12/97
SetRegValue $(ParamKeyHandle) {SoftexPcmcia,0,$(!REG_VT_DWORD),1}
DeleteRegValue $(ParamKeyHandle) "SoftexDock"
DeleteRegKey $(ParamKeyHandle) "Device"
CloseRegKey $(ParamKeyHandle)
else
Debug-Output "nishi 3"
goto finish_InstallOption
endif
Debug-Output "nishi 4"
CloseRegKey $(apa1480KeyHandle)
;; nishi
endif
set Status = STATUS_SUCCESSFUL
finish_InstallOption = +
ForListDo $(DrivesToFree)
LibraryProcedure STATUS,$(!LIBHANDLE), DeleteNetConnection $($) "TRUE"
EndForListDo
Return $(Status)
[Install-AddCopyOption]
;
; Add the files to the copy list
;
AddSectionKeyFileToCopyList Files-ScsiMiniportDrivers +
$(MiniportDriver) +
$(SrcDir) +
$(!STF_WINDOWSSYSPATH)\drivers
exit
[Install-DoCopyOption]
;
; Copy files in the copy list
;
CopyFilesInCopyList
exit
;-------------------------------------------------------------------------
; 4. DeInstallOption:
;
; FUNCTION: To remove files representing Option
; To remove the registry entry corresponding to the Option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;-------------------------------------------------------------------------
[DeInstallOption]
;
; Set default values for
;
set Status = STATUS_FAILED
;
; extract parameters
;
set Option = $($1)
;
; Get Adaptec Symbols
;
read-syms AdaptecInstall
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
else
set Status = STATUS_NOLANGUAGE
goto finish_DeInstallOption
endif
read-syms Strings$($0)
;
; check to see if Option is supported.
;
set OptionList = ^(Options, 0)
ifcontains $(Option) in $(OptionList)
else
goto finish_DeInstallOption
endif
set OptionList = ""
;
; fetch details about option
;
set MiniportDriver = #(Options, $(Option), 1)
set MiniportFile = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
set FilePath = $(!STF_WINDOWSSYSPATH)"\drivers\"$(MiniportFile)
;
; check to see if file is installed
; if not give success
;
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(FilePath)
ifstr(i) $(STATUS) == "NO"
set Status = STATUS_SUCCESSFUL
goto finish_DeInstallOption
endif
set ServiceNode = #(AdaptecInstall, $(MiniportDriver), 1)
shell "registry.inf" GetServicesEntryStart $(ServiceNode)
ifstr(i) $($R0) != "STATUS_SUCCESSFUL"
; this could happen if there is no start value or there is no
; key, in which case the option is not installed
set Status = STATUS_SUCCESSFUL
goto finish_DeInstallOption
endif
ifstr(i) $($R1) == $(!SERVICE_BOOT_START)
shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(String3)
ifstr(i) $($R0) != STATUS_SUCCESSFUL
goto do_removal
endif
ifstr(i) $($R1) == "CANCEL"
goto finish_DeInstallOption
endif
endif
do_removal =+
;
; disable the registry entry
;
shell "registry.inf" RemoveServicesEntry $(ServiceNode)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "SCSI.INF: Failed to shell RemoveServicesEntry"
goto finish_DeInstallOption
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "SCSI.INF: Failed to disable services entry"
goto finish_DeInstallOption
endif
;
; we won't remove the file because we can only do so during the next boot.
; if the user chooses to reinstall the same driver during this boot
; he will still end up deleting the driver on next boot. if the file
; should be deleted a warning should be put up saying that the user should
; not try to reinstall the driver during this boot
;
; AddFileToDeleteList $(FilePath)
set Status = STATUS_SUCCESSFUL
finish_DeInstallOption =+
return $(Status)
;-------------------------------------------------------------------------
; 5. GetInstalledOptions:
;
; FUNCTION: To find out the list of options which are installed
;
; INPUT: $($0): Language to Use
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_FAILED
;
; $($R1): List of options installed
; $($R2): Option installed Text List
;-------------------------------------------------------------------------
[GetInstalledOptions]
set Status = STATUS_FAILED
set InstalledOptions = {}
set InstalledOptionsText = {}
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
else
set Status = STATUS_NOLANGUAGE
goto finish_GetInstalledOptions
endif
set OptionList = ^(Options, 0)
ForListDo $(OptionList)
set MiniportDriver = #(Options, $($), 1)
set MiniportFile = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
set FilePath = $(!STF_WINDOWSSYSPATH)"\drivers\"$(MiniportFile)
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(FilePath)
ifstr(i) $(STATUS) == "YES"
shell "registry.inf" GetServicesEntryStart $(MiniportDriver)
ifint $($ShellCode) == $(!SHELL_CODE_OK)
ifstr(i) $($R0) == STATUS_SUCCESSFUL
ifstr(i) $($R1) != $(!SERVICE_DISABLED)
set OptionText = #(OptionsText$($0), $($), 1)
set InstalledOptions = >($(InstalledOptions), $($))
set InstalledOptionsText = >($(InstalledOptionsText), $(OptionText))
endif
endif
endif
endif
EndForListDo
set Status = STATUS_SUCCESSFUL
finish_GetInstalledOptions =+
Return $(Status) $(InstalledOptions) $(InstalledOptionsText)
;**************************************************************************
; PROGRESS GUAGE VARIABLES
;**************************************************************************
[ProgressCopyENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT is not correcly installed. Are you sure you want "+
"to cancel copying files?"
ProCancelCap = "Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
[StringsENG]
String1 = "SCSI Adapter"
;; nishi
;; String2 = "Please enter the full path to Adaptec's installation files."$(!LF)$(!LF)+
;; "These files are located in \WINNT\4_0 on the Adaptec SlimSCSI "+
;; " Manager Set diskette."
String2 = "Please enter the full path to Adaptec's installation files."$(!LF)$(!LF)+
"These files are located in \apa1480 on "+
" Softex Pcmcia Installation diskette.2"
;; nishi
String3 = "The SCSI Adapter has been marked as a boot device. Removing "+
"it may cause the system not to boot."$(!LF)$(!LF)"Are you sure "+
"you want to remove the Adapter."
[Source Media Descriptions]
1 = "Adaptec SlimSCSI Manager Set v1.00"
[Files-ScsiMiniportDrivers]
18NT40 = 1, apa1480s.sys, SIZE=39808
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.