WINSOCK.TXT Driver File Contents (DE220.EXE)

Installing D-Link DE-220 Family Ethernet Adapter
For WinSock Users
    (c) 1997 Copyright D-Link Corporation  ALL RIGHTS RESERVED

This document contains installation notes, which is not included in the
DE-220 Family Ethernet Adapter USER'S GUIDE or onscreen instructions,
for WinSock users regarding D-Link Ethernet Adapter installation.

This document contains information on the following topics:

1.0 Introduction
2.0 Installation Notes

1.0 Introduction

WinSock users please also refer to the following:

     File                  Description/Installation notes
     \README.TXT           For all users
     \PKTDRV\README.TXT    For all Packet driver users

2.0 Installation Notes

There are two steps involved in installing the Packet driver:

    1. Load Packet driver.
       There are two methods to load Packet driver.

       Method 1:
       In your CONFIG.SYS file, include the DEVICE command.

       DEVICE = DE22XPD.SYS [/option] <packet_int_no>

       Please refer to \PKTDRV\README.TXT for additional parameters

       Method 2:
       Issue DE22XPD command at the DOS command prompt.

       DE22XPD [/option] <packet_int_no>

       C:\>de22xpd 0x62

       Please refer to \PKTDRV\README.TXT for additional parameters

    2. To configure your local copy of Windows 3.1 in order to access the
       You need to download WINPKT.COM from your Internet file server

    3. Issue WINPKT command at the DOS command prompt.
       WINPKT <packet_int_no>

       The "<packet_int_no>" is software interrupt number used by
       packet driver.
       This number must be the same as driver's parameters.

       C:\>winpkt 0x62

    4. After starting winsock in Windows environment ,
       just set correct "Packet Vector" value.

    5. Winsock associated programs can be ready to used.

       See also winsock distributions INSTALL.DOC file

    6. Run Windows , winsock applications.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.57