DLKTCP.TXT Driver File Contents (DE220.EXE)

Installing D-Link DE-220 Family Ethernet Adapter
For D-Link TCP/IP Users
    (c) 1997 Copyright D-Link Corporation  ALL RIGHTS RESERVED

This document contains installation notes, which is not included in the
DE-220 Family Ethernet Adapter USER'S GUIDE or onscreen instructions,
for D-Link's TCP/IP users regarding DE-220 Family Ethernet Adapter

( Please note the "D-Link's TCP/IP" is the TCP/IP program
                       which has been modified by D-Link.)

This document contains information on the following topics:

1.0 Introduction
2.0 Installing Packet driver

1.0 Introduction

D-Link's TCP/IP users please also refer to the following:

     File                  Description/Installation notes
     \README.TXT           For all users
     \PKTDRV\README.TXT    For all Packet driver users

2.0   Installing Packet Driver

There are two methods to run the D-Link's TCP/IP program.

    METHOD 1:
    In your CONFIG.SYS file, include the DEVICE command.

        DEVICE = DE22XPD.SYS [/d] [/w] <packet_int_no>

        <packet_int_no> is the software interrupt vector number used by
                        the packet driver program. This can be from 96 to

        /d              Delay Initial - The driver program will not
                        initialize the network interface card until the
                        packet driver program is accessed by its upper
                        layer program.

        /w              The parameter is used only in the Windows environment.

        See \PKTDRV\README.TXT for additional parameters

    METHOD 2:
    1. In your AUTOEXEC.BAT file, include the following command lines:
        set HOSTS=<PATH>

        <PATH> is the directory where the D-Link TCP/IP programs reside.

    2. Issue DE22XPD command at the MS-DOS command prompt:

        DE22XPD [/d] [/w] <packet_int_no>

    3. Run TCPSTART.EXE, at the DOS command prompt, to start TCP/IP.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.65