; ***** MAESTRO *****
;localization strings
100=ESS Maestro Aux
101=ESS Maestro CD-Audio
102=ESS Maestro Wavetable Synthesis
103=ESS Maestro Record
104=ESS Maestro Playback
105=ESS Maestro Mixer
;about mixer
106=20dB
107=Meter
108=Mute
109=Record Source
121=Volume Control
122=Vol
123=Recording Control
124=Rec
125=Line
126=CD
127=Mic
128=Mixer
129=Aux
130=Video
131=MonoIn
132=Synth
133=Wave
134=MonoOut
141=Line 2
142=CD 2
143=Mic 2
144=Mixer 2
145=Aux 2
146=Video 2
147=MonoIn 2
148=Docking Speaker
149=Dock Spkr
150=System Spkr
151=Power Management Enable
152=Level-1/Level-2
153=Mic-2
154=PcSpkr
;--------------------------------------------------------------------------
; In order to take advantage of the following features, you have to
; 1) take out the first column of ";" from each line you want to use.
; 2) change the right hand side value of "=" depending on need.
; 3) take out ";" from the line containing ;config.ini
; between [maestro] and 1:maestro.sys in file "oemsetup.inf".
; (Here, a line starting with ";" means it's commented out.)
;--------------------------------------------------------------------------
M2M=1 ; 1/0 = M2M combo/M2E
SoftexAPM=1 ; 1/0 = enable/disable Softex Power Management Support
;EnableAutoInstall=1 ; 1/0 = automatic/manual installation
;New_Laptop.Sys=1 ; 1/0 = New/Old Laptop.sys ("New" Laptop.sys means from Jan. 7, 1998 or later)
Mic20dBOn=1 ; 1/0 = enable/disable Mic Volume 20dB boost
;PCMOutValue=4 ; 0 ~ 8
;enableMPU401=1 ; 1/0 = enable/disable MPU401
; Change the first 0 to 1 to enable secondary AC97 line out detection
; Disable secondary AC97 line out detection
;DetectDockingLineOut=1
;Default2ndMic=0 ; 1/0 = default Mic is 2nd/1st Mic.
;EnableD1D2APM=0 ; 1/0 = enable/disable Power Management (D1-1/D1-2)
;DefaultPCSpeakerMute=0 ; 1/0 = default of PC Speaker is mute/unmute (* AC97 Codec ONLY *)
;UseApmPciC4Reg=1 ; 1/0 = Change Power Management Control Reg (C4)
;SBGPIOData=4037 ; hexadecimal value
;SBGPIODataBit=20 ; hexadecimal value
;GeneralPower=01 01 00 01
;PowerD0=00 00 00 00
;PowerD1=00 01 01 01
;PowerD2=00 02 02 02
;PowerD3=00 03 03 03
;ConservationIdleTime=30
;PerformanceIdleTime=300
;IdlePowerState=1
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.