Packet Driver Installation
==========================
Copy the driver diskette, "RTSPKT.COM", into a directory. The packet
driver can be loaded from the DOS prompt or from the AUTOEXEC.BAT file.
The command line format for the packet driver is:
RTSPKT [packet_int_no] [ID0-ID1-ID2-ID3-ID4-ID5]
where packet_int_no is the software interrupt number, and
in the range 0x60 through 0x80 (including 0x60 and 0x80).
The default value is 0x60 (0x60 means 60h).
The [ID0-ID1, ..., ID5] are the 6 bytes' physical address,
and valued 0x0-0xff. This parameter is optional and only
required when multiple adapters are installed in system.
If only one adapter is installed, it is not necessary to
specify this parameter.
The physical address can be obtained by running the SETUP
program. The SETUP program is also supplied in this
adapter's driver diskette under root directory.
RTSPKT -U/-u packet_int_no
the parameter 'U' or 'u' may unload this packet driver
using this specific packet_int_no.
The following command example is used for only one adapter in system and
uses 0x60 as the software interrupt number:
>RTSPKT <Enter>
----END----
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.