1. ackxw00.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (ackxw00.exe)

IBM TrackPoint Support for Windows
===========================================
Version:  2.0


This diskette (or folder) contains the software support for the IBM
PS/2 TrackPoint Keyboard on Windows 95, Windows 98, and Windows NT
version 4.0.

This diskette contains provisional support for some builds of Windows
2000.  For more information, see the file README.W2K.

The file SETUP.BAT is intended for use ONLY with Windows NT 4.0.  Do
not execute SETUP.BAT on any other system.

This software is intended for use with the IBM PS/2 TrackPoint
Keyboard, version 4.0 or later.  For earlier versions, no special
software is needed.

Installation for Windows 95/Windows NT 4.0
------------------------------------------
  1. Start Windows 95/Windows NT 4.0.
  2. Insert the TrackPoint Driver Diskette into the diskette drive.
  3. On the Taskbar, click the Start button.
  4. Select Settings, Control Panel.
  5. Double Click on the Mouse icon.
  6. Select the General tab at the top of the Mouse Properties panel.
  7. Click on the Change button.
  8. Click on the Have Disk button.
  9. Enter "A:\common".
 10. Click on the OK button.
 11. Select IBM PS/2 TrackPoint from the list.
 12. Click on the OK button.
 13. Click on the Close button on the Mouse Properties panel.
 14. Restart your computer so the new settings will take effect.

Installation for Windows 98
---------------------------
  1. Start Windows 98.
  2. Insert the TrackPoint Driver Diskette into the diskette drive.
  3. Click on Start.
  4. Move the cursor to Settings;then click on Control Panel.
  5. Double Click on the System icon.
  6. Click on Device Manager tab at the top of the "System Properties" window.
  7. Double-click on Mouse.
  8. Double-click on PS/2 Mouse Port or IBM PS/2 TrackPoint.
  9. Click on the Driver tab.
 10. Click on the Update Driver... button.
 11. Click on Next.
 12. Click on Display a list of all the drivers in a specific location.
 13. Click on Next.
 14. Click on Have Disk.
 15. Enter "A:\common".
 16. Click on OK.
 17. Click on IBM PS/2 TrackPoint in the list.
 18. Click on Next.
 19. If "Update Driver Warning" window appears, click on Yes.
 20. Click on Next.
 21. Click on Finish in the "Update Device Driver Wizard" window.
 22. Restart your computer so the new settings will take effect.



Uninstallation for Windows NT 4.0
---------------------------------
  1. Start Windows NT 4.0.
  2. On the Taskbar, click the Start button.
  3. Select Settings, Control Panel.
  4. Double-click on Add/Remove Programs.
  5. Select "IBM TrackPoint Support 2.0".
  6. Click "Add/Remove".
  7. Click OK.
  8. In the Control Panel, double-click Mouse.
  9. Click on the "General" tab.
 10. Click "Change..."
 11. Click "Show all devices"
 12. In the left-hand box, select "(Standard mouse types)".
 13. In the right-hand box, select "Standard PS/2 Port Mouse".
 14. Click OK.
 15. When a "Confirm Device Install" warning appears, click "Yes".
 16. When a "General" warning appears, click "No".
 17. If the "Insert Disk" warning appears, click "OK" and direct the
     installation to your CDROM drive containing your Windows NT
     CDROM.
 18. Click "Close".
 19. If a "System Settings Change" dialog appears, click "Yes".

Uninstallation for Windows 98
-----------------------------
  1. Start Windows 98.
  2. On the Taskbar, click the Start button.
  3. Select Settings, Control Panel.
  4. Double-click on Add/Remove Programs.
  5. Select "IBM TrackPoint Support 2.0".
  6. Click "Add/Remove".
  7. If a "System Settings Change" dialog appears, click "No".
  8. Click OK.
  9. In the Control Panel, double-click System.
 10. Click on the "Device Manager" tab.
 11. Double-click "Mouse".
 12. Double-click "IBM PS/2 TrackPoint".
 13. Click on the "Driver" tab.
 14. Click "Update Driver...".
 15. Click "Next".
 16. Click "Display a list of all the drivers...".
 17. Click "Next".
 18. Click "Show all hardware".
 19. In the left-hand box, select "(Standard mouse types)".
 20. In the right-hand box, select "Standard PS/2 Port Mouse".
 21. Click "Next".
 22. Click "Next".
 23. Click "Finish".
 24. If a "System Settings Change" dialog appears, click "Yes".

Uninstallation for Windows 95
-----------------------------
  1. Start Windows 95.
  2. On the Taskbar, click the Start button.
  3. Select Settings, Control Panel.
  4. Double-click on Add/Remove Programs.
  5. Select "IBM TrackPoint Support 2.0".
  6. Click "Add/Remove".
  7. If a "System Settings Change" dialog appears, click "No".
  8. Click OK.
  9. In the Control Panel, double-click Mouse.
 10. Click on the "General" tab.
 11. Click "Change..."
 12. Click "Show all devices"
 13. In the left-hand box, select "(Standard mouse types)".
 14. In the right-hand box, select "Standard PS/2 Port Mouse".
 15. Click "OK".
 16. Click "Close".
 17. If a "System Settings Change" dialog appears, click "Yes".