MSPORTS.INF Driver File Contents (ackxw00.exe)

; MSPORTS.INF
; Copyright (c) 1994-1995 Microsoft Corporation

[version]
LayoutFile=layout.inf
signature="$CHICAGO$"
Class=Ports
Provider=%MS%

[DestinationDirs]
DefaultDestDir = 11  	   ;LDID_SYS


; Install class "Ports"
;----------------------------------------------------------
[ClassInstall]
AddReg=PortsClass.AddReg

[PortsClass.AddReg]
HKR,,,,%PortsClassName%

[ControlFlags]
ExcludeFromSelect=MF\EISA_HWP1C10_DEV0,MF\EISA_HWP1C10_DEV1
ExcludeFromSelect=PCMCIA\SOCKET_COMMUNICATIONS_INC-SOCKET_IO_PCMCIA_SERIAL_PORT_ADAPTER_REVISION_A-0484		; Socket PCMCIA Serial Adapter
ExcludeFromSelect=PCMCIA\SOCKET_COMMUNICATIONS_INC-SOCKET_IO_PCMCIA_SERIAL_PORT_ADAPTER_REVISION_B-12F8		; Socket PCMCIA Serial Adapter
ExcludeFromSelect=PCMCIA\SOCKET_COMMUNICATIONS_INC-PAGECARD_REVISION_A-FA29	; Socket PCMCIA PageCard V3.0
ExcludeFromSelect=PCMCIA\SOCKET_COMMUNICATIONS_INC-SOCKET_GPS_PCMCIA_GLOBAL_POSITIONING_SYSTEM_REVISION_B-AF8A		; Socket PCMCIA GPS Adapter
ExcludeFromSelect=PCMCIA\SOCKET_COMMUNICATIONS_INC-MOBILE_GPS_REVISION_C-66D0	; Socket PCMCIA GPS Adapter
ExcludeFromSelect=PCMCIA\DATA_BROADCASTING_CORP-SIGNALCARD_RECEIVER-4E9B		; DBC SignalCard
ExcludeFromSelect=PCMCIA\ROCKWELL-NAVCARD-64B7		; Rockwell NavCard
ExcludeFromSelect=PCMCIA\TRIMBLE_&_SOCKET_COMMUNICATIONS_INC-MOBILE_GPS_REVISION_B-6947
ExcludeFromSelect=PCMCIA\SMART_SERIAL_PORT-A0F6
ExcludeFromSelect=*IBM0002,*IBM0034,*PNP0510

; Drivers
;----------------------------------------------------------
[Manufacturer]
%Std%=Std
%HP%=HP
%IBM%=IBM
%Socket%=Socket
%DBC%=DBC
%Rockwell%=Rockwell
%Trimble%=Trimble
%Smart%=Smart

[Std]
%*PNP0400.DeviceDesc% = LptPort, *PNP0400           ; Printer Port
%*PNP0401.DeviceDesc% = EcpPort, *PNP0401           ; ECP Printer Port 
%*PNP0500.DeviceDesc% = ComPort, *PNP0500           ; Communications Port
%*PNP0501.DeviceDesc% = ComPort, *PNP0501           ; Communications Port
%*PNP0510.DeviceDesc% = ComPort, *PNP0510           ; IR Communications Port used byr IrDA stack

; Compaq devices
%*CPQA0E0.DeviceDesc% = EcpPort, *CPQA0E0           ; ECP Printer Port
%*CPQA0D9.DeviceDesc% = ComPort, *CPQA0D9           ; Communications Port

[HP]		; Hewlett Packard devices
%MF\EISA_HWP1C10_DEV0.DeviceDesc% = ComPort, MF\EISA_HWP1C10_DEV0
%MF\EISA_HWP1C10_DEV1.DeviceDesc% = LptPort, MF\EISA_HWP1C10_DEV1
%HWPDEAD.DeviceDesc% = ComPort, HWPDEAD

[IBM]
%*IBM0002.DeviceDesc%=ComPort,*IBM0002
%*IBM0034.DeviceDesc%=ComPort,*IBM0034

[Socket]
%Socket-0484.DeviceDesc% = ComPort, "PCMCIA\SOCKET_COMMUNICATIONS_INC-SOCKET_IO_PCMCIA_SERIAL_PORT_ADAPTER_REVISION_A-0484"
%Socket-12F8.DeviceDesc% = ComPort, "PCMCIA\SOCKET_COMMUNICATIONS_INC-SOCKET_IO_PCMCIA_SERIAL_PORT_ADAPTER_REVISION_B-12F8"
%Socket-FA29.DeviceDesc% = NonPort, "PCMCIA\SOCKET_COMMUNICATIONS_INC-PAGECARD_REVISION_A-FA29"
%Socket-AF8A.DeviceDesc% = NonPort, "PCMCIA\SOCKET_COMMUNICATIONS_INC-SOCKET_GPS_PCMCIA_GLOBAL_POSITIONING_SYSTEM_REVISION_B-AF8A"
%Socket-66D0.DeviceDesc% = NonPort, "PCMCIA\SOCKET_COMMUNICATIONS_INC-MOBILE_GPS_REVISION_C-66D0"

[DBC]
%DBC-4E9B.DeviceDesc% = NonPort, "PCMCIA\DATA_BROADCASTING_CORP-SIGNALCARD_RECEIVER-4E9B"

[Rockwell]
%Rockwell-64B7.DeviceDesc% = NonPort, "PCMCIA\ROCKWELL-NAVCARD-64B7"

[Trimble]
%Trimble-6947.DeviceDesc% = NonPort, "PCMCIA\TRIMBLE_&_SOCKET_COMMUNICATIONS_INC-MOBILE_GPS_REVISION_B-6947"

[Smart]
%Smart-A0F6.DeviceDesc% = ComPort, "PCMCIA\SMART_SERIAL_PORT-A0F6"


; LPT sections
;----------------------------------------------------------
[LptPort]
CopyFiles=LptPort.Copy
AddReg=LptPort.AddReg
LogConfig=lsnn,lsan,lann,laan

[EcpPort]
CopyFiles=LptPort.Copy
AddReg=EcpPort.AddReg
LogConfig=lsnn,lsan,lsaa,lann,laaa

[LptPort.Copy]
lpt.vxd

[LptPort.AddReg]
HKR,,DevLoader,,*vcomm
HKR,,Enumerator,,lptenum.vxd
HKR,,Contention,,*vpd
HKR,,PortDriver,,lpt.vxd
HKR,,PortSubClass,1,00
HKR,,ECPDevice,1,00

[ECPPort.AddReg]
HKR,,DevLoader,,*vcomm
HKR,,Enumerator,,lptenum.vxd
HKR,,Contention,,*vpd
HKR,,PortDriver,,lpt.vxd
HKR,,PortSubClass,1,00
HKR,,ECPDevice,1,01

; The following sections are LPT and ECP port logical
; resource configurations. Section name format means:
; Char 1 = l (LPT port)
; Char 2 = I/O config:    s (std), a (any)
; Char 3 = IRQ config: #,          a (any), n (none) 
; Char 4 = DMA config:             a (any), n (none)

[lsnn]
ConfigPriority=HARDRECONFIG
IOConfig=3bc-3be(3ff::),378-37a(3ff::),278-27a(3ff::)

[lsan]
ConfigPriority=HARDRECONFIG
IOConfig=3bc-3be(3ff::),378-37a(3ff::),278-27a(3ff::)
IRQConfig=3,4,5,6,7,8,9,10,11,12,13,14,15

[lann]
ConfigPriority=HARDRECONFIG
IOConfig=8@100-3ff%fff8(3ff::)

[laan]
ConfigPriority=HARDRECONFIG
IOConfig=8@100-3ff%fff8(3ff::)
IRQConfig=3,4,5,6,7,8,9,10,11,12,13,14,15

[lsaa]
ConfigPriority=HARDRECONFIG
IOConfig=3bc-3be(3ff::),378-37a(3ff::),278-27a(3ff::)
IRQConfig=3,4,5,6,7,8,9,10,11,12,13,14,15
DMAConfig=1,2,3,5,6,7

[laaa]
ConfigPriority=HARDRECONFIG
IOConfig=8@100-3ff%fff8(3ff::)
IRQConfig=3,4,5,6,7,8,9,10,11,12,13,14,15
DMAConfig=1,2,3,5,6,7

; End LPT and ECP LogConfig sections


[*pnp0400.det]
AddReg=Ports.AddReg

[Ports.AddReg]
HKR,,NoSetupUI,,1

[*pnp0401.det]
AddReg=Ports.AddReg

[LptPort.PosDup]
*PNP0401

[EcpPort.PosDup]
*PNP0400


; COM sections
;----------------------------------------------------------
[ComPort]
CopyFiles=ComPort.Copy
AddReg=ComPort.AddReg
LogConfig=c14,c1a,c23,c2a,c34,c3a,c43,c4a,caa

[ComPort.Copy]
serial.vxd
serialui.dll

[ComPort.AddReg]
HKR,,DevLoader,,*vcomm
HKR,,Enumerator,,serenum.vxd
HKR,,PortDriver,,serial.vxd
HKR,,Contention,,*vcd
HKR,,ConfigDialog,,serialui.dll
HKR,,DCB,3,1C,00,00,00, 80,25,00,00, 11,33,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00
HKR,,PortSubClass,1,01
HKR,,EnumPropPages,,"serialui.dll,EnumPropPages"

[*pnp0500.det]
AddReg=Ports.AddReg,DevMap.AddReg

; The following sections are COM port resource configs.
; Section name format means:
; Char 1 = c (COM port)
; Char 2 = I/O config: 1 (3f8), 2 (2f8), 3 (3e8), 4 (2e8), a (any)
; Char 3 = IRQ config: #, a (any)

[c14]			; COM1,IRQ4
ConfigPriority=HARDRECONFIG
IOConfig=3f8-3ff(3ff::)
IRQConfig=S:4

[c1a]			; COM1, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=3f8-3ff(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15

[c23]			; COM2, IRQ3
ConfigPriority=HARDRECONFIG
IOConfig=2f8-2ff(3ff::)
IRQConfig=S:3

[c2a]			; COM2, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=2f8-2ff(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15

[c34]			; COM3, IRQ4
ConfigPriority=HARDRECONFIG
IOConfig=3e8-3ef(3ff::)
IRQConfig=S:4

[c3a]			; COM3, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=3e8-3ef(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15

[c43]			; COM4, IRQ3
ConfigPriority=HARDRECONFIG
IOConfig=2e8-2ef(3ff::)
IRQConfig=S:3,5

[c4a]			; COM4, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=2e8-2ef(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15

[caa]			; Any base, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=8@100-ffff%fff8(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15

; End COM port LogConfig sections

[ComPort.PosDup]
*PNP0500,*PNP0501

[DevMap.AddReg]
HKLM,hardware\devicemap\serialcomm,COM1,,COM1
HKLM,hardware\devicemap\serialcomm,COM2,,COM2


; "NoDrv" section: We do not yet support these port devices.
;----------------------------------------------------------
[NoDrv]

; "Non-port" sections: PCMCIA cards that look like COM
; ports, but aren't (excluding modems).
;----------------------------------------------------------
[NonPort]
CopyFiles=NonPort.Copy
AddReg=NonPort.AddReg

[NonPort.Copy]
serial.vxd

[NonPort.AddReg]
HKR,,PortSubClass,1,01
HKR,,DevLoader,,*vcomm
HKR,,PortDriver,,serial.vxd
HKR,,Contention,,*vcd
HKR,,DCB,3,1C,00,00,00, 80,25,00,00, 11,33,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00


; User readable strings
;----------------------------------------------------------
[Strings]
MS  = "Microsoft"
Std = "(Standard port types)"
PortsClassName = "Ports (COM & LPT)"

*PNP0400.DeviceDesc = "Printer Port"
*PNP0401.DeviceDesc = "ECP Printer Port"
*PNP0500.DeviceDesc = "Communications Port"
*PNP0501.DeviceDesc = "Communications Port"
*PNP0510.DeviceDesc = "Generic Ir Serial Port"

; Compaq devices
*CPQA0E0.DeviceDesc = "ECP Printer Port"
*CPQA0D9.DeviceDesc = "Communications Port"

HP = "Hewlett Packard"
MF\EISA_HWP1C10_DEV0.DeviceDesc="HP Communications Port"
MF\EISA_HWP1C10_DEV1.DeviceDesc="HP Printer Port"
HWPDEAD.DeviceDesc="HP Infra-Red Communication Port"

IBM="IBM"
*IBM0002.DeviceDesc="IBM Thinkpad Infrared Port"
*IBM0034.DeviceDesc="IBM Thinkpad Infrared Port"

Socket="Socket Communications"
Socket-0484.DeviceDesc="Socket PCMCIA Serial Adapter"
Socket-12F8.DeviceDesc="Socket PCMCIA Serial Adapter"
Socket-FA29.DeviceDesc="Socket PCMCIA PageCard V3.0"
Socket-AF8A.DeviceDesc="Socket PCMCIA GPS Adapter (Rev. B)"
Socket-66D0.DeviceDesc="Socket PCMCIA GPS Adapter (Rev. C)"

DBC="DBC"
DBC-4E9B.DeviceDesc="DBC SignalCard"

Rockwell="Rockwell"
Rockwell-64B7.DeviceDesc="Rockwell NavCard"

Trimble="Trimble"
Trimble-6947.DeviceDesc="Trimble PCMCIA GPS Adapter (Rev. B)"

Smart="SMART Modular Technologies"
Smart-A0F6.DeviceDesc="SMART Serial Port"


[Det.DevINFs]
*pnp8215=netxir.inf	;Xircom PE3
*pnpa01e=scsi.inf	;Trantor T338
*pnpa01f=scsi.inf	;Trantor T348
*pnpa02f=scsi.inf	;Trantor T358

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.53