Installing video support
System Installation Requirements
HP OmniBook 800 installed with Windows 3.1 or Windows for
Workgroups
HP OmniBook 800 PCMCIA Drivers. These drivers are located
on the OmniBook hard disk in C:\OMNIBOOK\DRIVERS\WFW\VIDEO.
These drivers are also located on the HP OmniBook Recovery CD
in the \OmniBook\DRIVERS\WFW\VIDEO directory.
Procedures
1. Copy the following files from the c:\omnibook\drivers\wfw\video\windows
directory to c:\windows directory:
NEOHELP.HLP
NEOMAGIC.EXE
2. Copy the contents from the c:\omnibook\drivers\wfw\video\windows\system
directory to the c:\windows\system directoy. (There are a total of 29
files.)
3. Add the following section to the end of the SYSTEM.INI file.
[Neomagic]
VRefresh=60
Resolution=800x600
dpi=96
4. Reboot the OmniBook.
5. From the Main group, Windows Setup, Options, Change System Settings,
Display (down arrow), choose the following video driver:
NeoMagic v3.21 800x600 256 (Sm font)
6. Choose "Current" as the installed driver.
7. Restart Windows.
8. This procedure will install a Video Configuration icon in the Control
Panel for specific video settings.
9. The NeoMagic display driver is now installed.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.