1. ob800.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (ob800.zip)

                  Installing Sound support



System Installation Requirements

HP OmniBook 800 installed with Windows 3.1 or Windows for Workgroups

HP OmniBook 800 PCMCIA Drivers.  These drivers are located on the OmniBook
   hard disk in C:\OMNIBOOK\DRIVERS\WFW\SOUND. These drivers are also
   located on the HP OmniBook Recovery CD in the \OmniBook\DRIVERS\WFW\SOUND
   directory.



Procedures
1.   Copy the files contained in the c:\omnibook\drivers\wfw\sound\windows
     directory to the c:\windows directory. (There are a total of nine files.)
2.   Copy the contents of the c:\omnibook\drivers\wfw\sound\windows\system
     directory to the c:\windows\system directory. The need to replace some
     existing files may be necessary. (There are a total of nine files.)
3.   Add the following sections and lines to c:\windows\system\system.ini file.
     (The simplest method is to cut and paste from the sound.txt found in the
     c:\omnibook\drivers\wfw\sound directory.)
4.  In the [drivers] section add
          WAVE=es1888wn.drv
          MIDI=es1888wn.drv
          AUX=es1888wn.drv
          MIXER=es1888wn.drv
          MIDI1=audmpu.drv
          
5.  Add the [auddrive.drv] section and the following lines.
          [auddrive.drv]
          mpu401=no
          essdaemon=yes
          ControlRegisterAddressing=FALSE
          AudioDrive=ES1888
          Synth=OPL3
          portchoices=220,230,240,250
          irqchoices=2,5,7,10
          dmachoices=0,1,3
          port=220
          int=5
          dmachannel=1
          portchoicesMPU401=300,310,320,330
          irqchoicesMPU401=2,5,7,10,11
          portMPU401=300
          intMPU401=7
          IRQChoicesWave2=11,12,15
          DMAChoicesWave2=0,5,6
          IntWave2=11
          DMAChannelWave2=5
          AutoConfig=yes
          VerifyInt=yes
          VerifyDMA=no
          HotKeyVolUp=CTRL-U
          HotKeyVolDown=CTRL-D
          HotKeyVolMute=CTRL-M
          Mute=No
          MutePCspk=No
          VolumeMutes=4
          VolumeMixer=63
          WaveInMixer=2
          VoiceMixer=2
          WaveInMonitor=No
          VoiceMonitor=No
          VolumeMaster=32768
          VolumeMasterR=32768
          VolumeWave=32768
          VolumeWaveR=32768
          VolumeSynth=32768
          VolumeSynthR=32768
          VolumeLine=32768
          VolumeLineR=32768
          VolumeMic=32768
          VolumeMicR=32768
          VolumeCD=32768
          VolumeCDR=32768
          VolumeAuxB=32768
          VolumeAuxBR=32768
          VolumePCspk=32768
          WaveInMic=32768
          WaveInMicR=32768
          WaveInLine=32768
          WaveInLineR=32768
          WaveInCD=32768
          WaveInCDR=32768
          WaveInAuxB=32768
          WaveInAuxBR=32768
          WaveInMaster=32768
          WaveInMasterR=32768
          VoiceMic=32768
          VoiceMicR=32768
          VoiceLine=32768
          VoiceLineR=32768
          VoiceCD=32768
          VoiceCDR=32768
          VoiceAuxB=32768
          VoiceAuxBR=32768
          VoiceMaster=32768
          VoiceMasterR=32768

7.   Add the following line to the [386Enh] section of the c:\windows\system.ini
     file.
          device=es1888wn.386
6.   Modify the “load= “   line in the c:\windows\win.ini file as follows:
          load=essdaemn.exe
8.   Restart Windows. Upon entering Windows, the default chime should sound.
9.   This procedure will install a MIDI Mapper icon in the Control Panel.
10.  The sound driver is now installed.