README.TXT Driver File Contents (ob800.zip)

             Installing OS/2 Warp Sound Drivers
                              
                              
                              
                              

Requirements

HP OmniBook 800 with OS/2 Warp or Warp Connect Installed.
HP OmniBook 800 drivers for the Sound.  This driver is
located on the hard drive in the C:\OMNIBOOK\DRIVERS\OS2\SOUND subdirectory.
These files are available after finishing the selection of Windows 95 or
Windows for Workgroups.  This driver is also located on the HP OmniBook
Recovery CD.

Note:     You must install the Sound drivers from floppy
     disk.  To create an OS/2 OmniBook 800 Sound drivers disk do
     the following:  Copy the contents of C:\OMNIBOOK\DRIVERS\OS2\SOUND to the
     root directory of a blank floppy disk. Label the Diskette OS/2 OmniBook
     800 Sound Drivers Disk.

Procedure

1.   Open an OS/2 full screen or windowed session.
2.   Insert the OS/2 OmniBook 800 Sound Drivers Disk.
3.   Type A:EINSTALL 1888
4.   From the IBM Multimedia Presentation Manager/2 - Installation Windows,
     Select ES1888 WinOS2/Windows Audio if you installed OS/2 WinOS2 support
     and click Install.
5.   Click Yes to Change the CONFIG.SYS
6.   Click OK to Specify 1 AudioDrive ES1888.
7.   Set the following values and click OK.
    I/O Address              220
    DMA Channel              1
    DMA 2                    5
    Interrupt Level          5
    Interrupt 2              11
8.    Set the following values for MIDI and click OK.
    DMA Transfer Mode        4
    MPU-401 I/O Address      330
    MPU-401 Interrupt Level  7
9.   Set the following values for Windows Audio Options and
  click OK.
    I/O Address              220
    Interrupt Level          5
    Interrupt 2              11
    DMA Channel              1
    DMA 2               5
10.  Click OK to accept changes to the SYSTEM.INI.
11.  Click OK twice.
12.  Type Exit and remove the diskette from drive A.
13.  Shutdown by selecting the Shut down button on the
LaunchPad, and press Ctrl-Alt-Delete to reboot when prompted.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.42