Installing OS/2 Warp SCSI Drivers
If you are using the OmniBook Docking station use the following
procedure to install SCSI Support. This procedure is not
necessary if you installed OS/2 Warp from a SCSI CD-ROM drive
because the SCSI drivers are already installed.
Requirements
HP OmniBook 800 with OS/2 Warp or Warp Connect Installed.
HP OmniBook 800drivers for the SCSI. This driver is located
on the hard drive in the C:\OMNIBOOK\DRIVERS\OS2\SCSI
subdirectory. These files are available after finishing the
selection of Windows 95 or Windows for Workgroups. This driver
is also located on the HP OmniBook Recovery.
Note: You must install these drivers from floppy disk. Copy
the contents of C:\OMNIBOOK\DRIVERS\OS2\SCSI to a blank floppy
disk.
Procedure
1. Insert the Floppy disk with the SCSI drivers in the A: drive.
2. Open the System Setup icon in the OS/2 System and double-click on
Device Driver Install.
3. Change the Drive to A:\ if necessary and click Install.
4. Select NCR SDMS ™ V3.0 OS/2 2.x ADD Driver, Copywright 1993
5. Click OK
6. Click Exit and click Yes to confirm.
7. Click OK.
8. Shutdown by selecting the Shut down button on the LaunchPad,
and press Ctrl-Alt- Delete to reboot when prompted.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.