Microsoft Windows NT 4.0 Installing the HP OmniBook Video Driver System Installation Requirements: HP OmniBook 800 with Microsoft Windows NT 4.0 installed. HP OmniBook 800 Windows NT 4.0 video driver. This video driver can be obtained from the default HP Windows 95 build in the following directory: C:\OMNIBOOK\DRIVERS\NT\VIDEO\NT40\. The driver can also be found on the HP OmniBook 800 recovery CD-ROM. Procedure: Boot the HP OmniBook 800 with Microsoft Windows NT 4.0 and logon with administrative permissions. Double click on the ‘My Computer’ icon then double click on the Control Panel icon. From within the Control Panel icon, double click on the Display icon. Choose the Settings tab. Select the option Display Type by clicking the mouse over it. Under the Adapter Type choose the Change box. Choose the Have Disk option at the Change Display windows. Enter the location of the Windows NT 4.0 video driver for the HP OmniBook 800 then choose OK. The following adapter should be located by using the correct Windows NT 4.0 video driver: NeoMagic MagicGraph 128/Z/ZV. Select this driver then choose OK to continue. Windows NT will prompt you that you are installing a third-party driver. Choose Yes to install the driver and continue. Windows NT will load the necessary files and then will prompt you that you need to reboot in order for the changes to take effect. Choose OK to continue. Close all of the video display windows and then select Yes to reboot the HP OmniBook 800 (make sure you remove the floppy disk from the floppy disk drive). Once rebooted the video driver will not appear to be in effect, Microsoft Windows NT will prompt you that a new graphics card has been installed. Choose OK at this prompt and then change the Desktop Area to 800x600. Click the Test button to test the adapter at this display setting. Choose Yes to confirm that the test bitmap was successful. Choose OK at the display properties window and Windows NT will set the screen resolution. The Windows NT 4.0 video driver is now installed correctly.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.