Microsoft Windows NT 3.51 Installing Windows NT 3.51 Video on the OmniBook 800 System Installation Requirements: HP OmniBook 800 with Microsoft Windows NT 3.51 installed HP OmniBook 800 drivers for video. This driver is located on the HP OmniBook 800 hard drive in the C:\OMNIBOOK\DRIVERS\WINNT\VIDEO directory. These drivers are also located on the HP OmniBook 800 recovery CD-ROM. Procedure: 1. Boot the OmniBook 800 and load Microsoft Windows NT 3.51. Logon with administrative permissions. 2. From the Main program group double click on Control Panel. 3. From within Control Panel, double click on Display. 4. Under Display Settings choose Change Display Type. 5. In the Adapter Type panel, choose the Change dialog box. 6. This will bring the Select Device dialog box to the foreground. Choose the Other dialog box (located at the very bottom of the Select Device window). 7. Windows NT will now ask you for the location of the video driver files. Enter the location (either C:\OmniBook\drivers\nt\video or any other location that has the correct driver) of the driver files. 8. Windows NT will bring up a new window with the NeoMagic model selected. Choose Install to install the NeoMagic video driver for Windows NT. 9. Windows NT will prompt you with the following message: This operation will change your system configuration. Do you want to proceed anyway? Choose Yes to continue with the driver installation. 10. Windows NT will ask for the location of the drivers for the NeoMagic video adapter. Enter the correct driver then choose Continue. 11. Windows NT will load the driver and display that the driver has been successfully installed. Choose OK. Windows NT will prompt informing that the driver could not be started dynamically and will ask you to restart Windows NT to run with the new driver. Choose OK and then choose Restart Now to restart the HP OmniBook with the correct video driver installed. 12. After restarting the HP OmniBook with Windows NT 3.51 the default display resolution has been temporarily used by the system. Windows NT will prompt you upon login to use the Display option in Control Panel to configure the adapter. Choose OK at this prompt then under Display Settings change the Desktop Area to 800 by 600 pixels and set the colors to 256 (if desired). Then choose Test to confirm that the adapter works at these settings. If the adapter worked correctly choose OK then choose to restart Windows NT. The HP OmniBook 800 video will now function correctly while running Windows NT 3.51 Workstation.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.