README.TXT Driver File Contents (4150n400.exe)

To activate full touch pad capabilities

The built-in pointing stick driver supports only basic touch
pad features. To activate full touch pad capabilities, you
have to
- Remove the pointing stick driver.
- Disable the pointing stick.
- Install touch pad support.

Remove the pointing stick driver
- From Control Panel, open Add/Remove Program and remove IBM
  TrackPoint support.

Disable the pointing stick
 1. From the Start menu, shut down, then restart the
    OmniBook.
 2. When you see the HP logo, press F2 to enter the BIOS
    Setup utility.
 3. Select the System Devices menu.
 4. Highlight Internal Pointing Devices and select Touch Pad
    Only.
 5. Press F10 to save and exit.

Install touch pad support
- From the Start menu, run
  c:\omnibook\drivers\touchpad\install.exe (also present on
  the Recovery CD).

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.10