EDSPPORT BETA 1.00 Release Notes 5/15/97 Henry Cheng _____________________________________________________________________________ INSTALLATION: 1) Run SETUP.EXE from this diskette. 2) Select I/O Ports, IRQ, and COM port at the installation menu. 3) Select OK to continue, CANCEL to cancel the installation. 4) Use the Modem icon in Control Panel to install the modem, it will automatically detect the EDSPPORT modem, do not choose this item manually. 5) That's it! KNOWN PROBLEMS: 1) SETUP cannot detect resource conflicts, beware of IRQs used by PCI bus. Refer to CMOS SETUP or system start messages to locate IRQ usage. This will be fixed at a later time... it may never work 100% as NT 4.0 does not have Plug n Play. 2) SETUP cannot detect system COM port usage and may allow user selection of UART supported COM ports, this will be fixed at a later time. Check the Ports icon prior to running SETUP to existing COM port usage. 3) Fax does not work, implementation and debug is not complete. 4) The ES2820 chip on the current 2 layer board cannot fire IRQs 7, 10 , and 12, SETUP has been modified accordingly. COMPATIBILITY: 1) NT 4.0 Hyperterminal 2) NT 4.0 RAS 3) 16bit Terminal from Win3.1Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.