[TYPICAL] Net= NetTrans=MSTCP NetClient=FAMILY Service= [COMPACT] Net= NetTrans=MSTCP NetClient=FAMILY NetService= [PORTABLE] Net= NetTrans=MSTCP NetClient=FAMILY NetService= [LAN_TYPICAL] Net= NetTrans=MSTCP NetClient=VREDIR NetService= [LAN_COMPACT] Net= NetTrans=MSTCP NetClient=VREDIR NetService= [LAN_PORTABLE] Net= NetTrans=MSTCP NetClient=VREDIR NetService= ;; ;; The following sections map detected network software versions ;; to corresponding Plug-and-Play IDs. ;; [WINDOWS_NET] xx000000=VREDIR [WORKGROUP_CLIENT] xx000000=VREDIR [DEC] ;xx040000=DEC40 xx040100=DEC40 xx050000=DEC50 ;; 1=NDIS ;; 2=ODI ;; 3=DLC ;; 4=DEPCA ;; 5=EWRK3 ;; 6=X25 ;; 7=ISDN xx010000=DEC50 xx05x001=DEC50 xx05x002=DEC50O xx05x003=DEC50U xx05x004=DEC50U xx05x005=DEC50U ;;xx05x006= ;;xx05x007= [LANTASTIC] xx040000=LANT4 xx040001=LANT4MS xx050000=LANT5 xx060000=LANT5 [BANYAN] xx055200=VINES552,VREDIR [DLR] 00012000=VREDIR 01012000=VREDIR 01013000=VREDIR 01020000=VREDIR [LANMAN] xx000000=VREDIR [IBMDLC] xx000000=IBMDLC [MSNET] xx000000=VREDIR [NETWARE] 00000000=NETWARE3 00032600=NETWARE3 00040000=NETWARE4 [PCNFS] 00000000=PCNFS50 ;; ;; The following sections map detected transports ;; to corresponding Plug-and-Play IDs. ;; [WINDOWS_NET_TRANSPORT] ; Strings from system.ini [386enh] network= ; and system.ini [Network Drivers] network= *netbeui=NETBEUI netbeui.386=NETBEUI vnb.386=NETBEUI nwlink.386=NWLINK nwnblink.386=NWNBLINK vtcp.386=MSTCP tcpdrv.dos=MSTCP TSR_MSDLC=MSDLC32 [WORKGROUP_CLIENT_TRANSPORT] ; Strings from system.ini, [Network Drivers], network= *netbeui=NETBEUI netbeui.386=NETBEUI tcpdrv.dos=MSTCP TSR_MSDLC=MSDLC32 [LANMAN_TRANSPORT] ; Strings from setup.ini [setup] driver0= NETBEUI=NETBEUI TCPIP=MSTCP TSR_MSDLC=MSDLC32 ;; ;; The following sections are executed when installing these ;; transport drivers while doing an upgrade. ;; ;When upgrading from WFW network this section is used [WINDOWS_NET.UPGRADE] NetTrans\NETBEUI=netdef.inf,WFW.NETBEUI NetTrans\Nwlink=netdef.inf,WFW.NWLINK NetTrans\MSDLC32=netdef.inf,WFW.MSDLC32 NetTrans\MSDLC=netdef.inf,WFW.MSDLC32 NetTrans\MSTCP=netdef.inf,WFW.MSTCP ;When upgrading from WFW Workgroup Client this section is used [WORKGROUP_CLIENT.UPGRADE] NetTrans\NETBEUI=netdef.inf,WFW.NETBEUI NetTrans\Nwlink=netdef.inf,WFW.NWLINK NetTrans\MSDLC32=netdef.inf,WFW.MSDLC32 NetTrans\MSDLC=netdef.inf,WFW.MSDLC32 ;When upgrading from Lanman this section is used [LANMAN.UPGRADE] NetTrans\NETBEUI=netdef.inf,LANMAN.NETBEUI NetTrans\MSDLC32=netdef.inf,LANMAN.MSDLC32 NetTrans\MSDLC=netdef.inf,LANMAN.MSDLC32 ;; ;; The following sections are for WFW upgrades ;; [WFW.NETBEUI] ;Sessions parameter ReadIni=%35%\protocol.ini,NETBEUI,SESSIONS WriteReg=HKLM,System\CurrentControlSet\Services\VxD\NETBEUI,sessions, ReadIni=%35%\protocol.ini,NETBEUI,SESSIONS WriteReg=HKLM,System\CurrentControlSet\Services\VxD\NETBEUI\Ndi\params\sessions,, ;NCBS parameter ReadIni=%35%\protocol.ini,NETBEUI,NCBS,, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\NETBEUI,ncbs, ReadIni=%35%\protocol.ini,NETBEUI,NCBS,, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\NETBEUI\Ndi\params\ncbs,, [WFW.NWLINK] ;Frame type - don't copy use auto detection instead ;ReadIni=%35%\protocol.ini,nwlink,FRAME,FRAME_TABLE ;WriteReg=HKR,Ndi\params\Frame_Type,, ;Maximum connections ReadIni=%35%\protocol.ini,nwlink,MAX_CONNECTIONS,, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\NWLink,maxconnect, ReadIni=%35%\protocol.ini,nwlink,MAX_CONNECTIONS,, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\NWLink\Ndi\params\maxconnect,, ;Maximum sockets ReadIni=%35%\protocol.ini,nwlink,MAX_SOCKETS,, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\NWLink,maxsockets, ReadIni=%35%\protocol.ini,nwlink,MAX_SOCKETS,, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\NWLink\Ndi\params\maxsockets,, ;Force even packets ReadIni=%35%\protocol.ini,nwlink,EVEN_PACKETS, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\NWLink,forceeven, ReadIni=%35%\protocol.ini,nwlink,EVEN_PACKETS, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\NWLink\Ndi\params\forceeven,, ;Source routing ReadIni=%35%\protocol.ini,nwlink,SOURCE_ROUTING, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\NWLink,cachesize, ReadIni=%35%\protocol.ini,nwlink,SOURCE_ROUTING, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\NWLink\Ndi\params\cachesize,, [WFW.MSDLC32] ; For WFW 3.1 DLCXIF was used as the section name ; For WFW 3.11 msdlc$ was used as the section name ; For WFW 3.11 msdlc was also used as the section name ; Therefore we try to copy each, the one that's present will be used ; ; swap ReadIni=%35%\protocol.ini,msdlc$,swap, WriteReg=HKR,Ndi\params\swap,, ReadIni=%35%\protocol.ini,msdlc,swap, WriteReg=HKR,Ndi\params\swap,, ReadIni=%35%\protocol.ini,DLCXIF,swap, WriteReg=HKR,Ndi\params\swap,, ; saps ReadIni=%35%\protocol.ini,msdlc$,saps, WriteReg=HKR,Ndi\params\saps,, ReadIni=%35%\protocol.ini,msdlc,saps, WriteReg=HKR,Ndi\params\saps,, ReadIni=%35%\protocol.ini,DLCXIF,saps, WriteReg=HKR,Ndi\params\saps,, ; stations ReadIni=%35%\protocol.ini,msdlc$,stations, WriteReg=HKR,Ndi\params\stations,, ReadIni=%35%\protocol.ini,msdlc,stations, WriteReg=HKR,Ndi\params\stations,, ReadIni=%35%\protocol.ini,DLCXIF,stations, WriteReg=HKR,Ndi\params\stations,, ; commands ReadIni=%35%\protocol.ini,msdlc$,commands, WriteReg=HKR,Ndi\params\commands,, ReadIni=%35%\protocol.ini,msdlc,commands, WriteReg=HKR,Ndi\params\commands,, ReadIni=%35%\protocol.ini,DLCXIF,commands, WriteReg=HKR,Ndi\params\commands,, ; usedix ReadIni=%35%\protocol.ini,msdlc$,usedix, WriteReg=HKR,Ndi\params\usedix,, ReadIni=%35%\protocol.ini,msdlc,usedix, WriteReg=HKR,Ndi\params\usedix,, ReadIni=%35%\protocol.ini,DLCXIF,usedix, WriteReg=HKR,Ndi\params\usedix,, ; xsaps ReadIni=%35%\protocol.ini,msdlc$,xsaps, WriteReg=HKR,Ndi\params\xsaps,, ReadIni=%35%\protocol.ini,msdlc,xsaps, WriteReg=HKR,Ndi\params\xsaps,, ReadIni=%35%\protocol.ini,DLCXIF,xsaps, WriteReg=HKR,Ndi\params\xsaps,, ; xstations ReadIni=%35%\protocol.ini,msdlc$,xstations, WriteReg=HKR,Ndi\params\xstations,, ReadIni=%35%\protocol.ini,msdlc,xstations, WriteReg=HKR,Ndi\params\xstations,, ReadIni=%35%\protocol.ini,DLCXIF,xstations, WriteReg=HKR,Ndi\params\xstations,, [WFW.MSTCP] ;;NBT section of system.ini ;EnableDNS ReadIni=%35%\system.ini,NBT,EnableDNS, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\MSTCP,EnableDNS, ;NameServer1 ReadIni=%35%\system.ini,NBT,NameServer1, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\MSTCP,NameServer1, ;NameServer2 ; Write a null string and replace it if there is a setting ReadData= WriteReg=HKLM,System\CurrentControlSet\Services\VxD\MSTCP,NameServer2, ReadIni=%35%\system.ini,NBT,NameServer2, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\MSTCP,NameServer2, ;ScopeID ;Write a null string in the registry, if there's a setting we'll overwrite it ReadData= WriteReg=HKLM,System\CurrentControlSet\Services\VxD\MSTCP,ScopeID, ReadIni=%35%\system.ini,NBT,ScopeID, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\MSTCP,ScopeID, ;NodeType ReadIni=%35%\system.ini,NBT,NodeType, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\MSTCP,NodeType, ;LMHostFile ReadIni=%35%\system.ini,NBT,LMHostFile, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\MSTCP,LMHostFile, ;EnableProxy ReadIni=%35%\system.ini,NBT,EnableProxy, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\MSTCP,EnableProxy, ; ;;DNS section of system.ini ;Domain ReadIni=%35%\system.ini,DNS,DomainName, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\MSTCP,Domain, ;SearchList(DNSDomains) ReadIni=%35%\system.ini,DNS,DNSDomains, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\MSTCP,SearchList, ;NameServer(DNSServers) ReadIni=%35%\system.ini,DNS,DNSServers, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\MSTCP,NameServer, ;HostName ReadIni=%35%\system.ini,DNS,HostName, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\MSTCP,HostName, ; ;;<netcard> section of system.ini ;Set the CardSectionName variable for use below ReadIni=%35%\system.ini,MSTCP,Interfaces SetVar=CardSectionName ; ;IPMask ReadIni=%35%\system.ini,@CardSectionName@,IPMask, WriteReg=HKR,,IPMask, ;IPAddress ReadIni=%35%\system.ini,@CardSectionName@,IPAddress, WriteReg=HKR,,IPAddress, ;Default Gateway ReadIni=%35%\system.ini,@CardSectionName@,DefaultGateway WriteReg=HKR,,DefaultGateway, ;[FRAME_TABLE] ;ETHERNET_802.2=1 ;ETHERNET_802.3=0 ;ETHERNET_II=2 ;Map token ring to AUTO ;TOKEN-RING=4 ;; ;; The following sections are for LANMAN upgrades ;; [LANMAN.NETBEUI] ;Sessions parameter ; Uses "*" to wild card match the spaces Lanman had in protocol.ini ReadIni=%35%\protocol.ini,NETBEUI_XIF,*SESSIONS* WriteReg=HKLM,System\CurrentControlSet\Services\VxD\NETBEUI,sessions, ReadIni=%35%\protocol.ini,NETBEUI_XIF,*SESSIONS* WriteReg=HKLM,System\CurrentControlSet\Services\VxD\NETBEUI\Ndi\params\sessions,, ;NCBS parameter ReadIni=%35%\protocol.ini,NETBEUI_XIF,*NCBS*,, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\NETBEUI,ncbs, ReadIni=%35%\protocol.ini,NETBEUI_XIF,*NCBS*,, WriteReg=HKLM,System\CurrentControlSet\Services\VxD\NETBEUI\Ndi\params\ncbs,, ;Lanabase parameter ;ReadIni=%35%\protocol.ini,NETBEUI_XIF,*LANABASE*,, [LANMAN.MSDLC32] ; For Lanman MSDLC_XIF was used as the section name ; For WFW 3.11 msdlc$ was used as the section name ; For WFW 3.11 msdlc was also used as the section name ; Therefore we try to copy each, the one that's present will be used ; ; swap ReadIni=%35%\protocol.ini,MSDLC_XIF,swap, WriteReg=HKR,Ndi\params\swap,, ; saps ReadIni=%35%\protocol.ini,MSDLC_XIF,saps, WriteReg=HKR,Ndi\params\saps,, ; stations ReadIni=%35%\protocol.ini,MSDLC_XIF,stations, WriteReg=HKR,Ndi\params\stations,, ; commands ReadIni=%35%\protocol.ini,MSDLC_XIF,commands, WriteReg=HKR,Ndi\params\commands,, ; usedix ReadIni=%35%\protocol.ini,MSDLC_XIF,usedix, WriteReg=HKR,Ndi\params\usedix,, ; xsaps ReadIni=%35%\protocol.ini,MSDLC_XIF,xsaps, WriteReg=HKR,Ndi\params\xsaps,, ; xstations ReadIni=%35%\protocol.ini,MSDLC_XIF,xstations, WriteReg=HKR,Ndi\params\xstations,,Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.