net2xnet.inf Driver File Contents (polaroidpdc3035driver.zip)

; OCE2XNET.INF
;
; Version 1.18
;
; This is the Setup information file for
; Olicom Ethernet Adapters
;
; Copyright 1995-97, Olicom A/S

[version]
CatalogFile=net2xnet.cat
LayoutFile=LAYOUT.INF, LAYOUT1.INF, layout2.inf
signature="$CHICAGO$"
Class=Net
provider=%V_MS%


[Manufacturer]
%M_Olicom%=Olicom

[OLICOM]
%*OLC94A5.DeviceDesc%=*OLC94A5.ndi, *OLC94A5 ; Olicom Ethernet ISA Adapter
%OC2220A.DeviceDesc%=OC2220A.ndi, PCMCIA\OLICOM-ETHERCOM-1018 ; Olicom Ethernet PCMCIA
%OC2220B.DeviceDesc%=OC2220B.ndi, PCMCIA\OLICOM-ETHERNET-0C79 ; Olicom Ethernet PCMCIA
%OC223X.DeviceDesc%=OC223X.ndi, MF\OLICOMOCE2X_DEV1 ; Olicom Ethernet+Modem 28.8 kbps PCMCIA
%OC2231.DeviceDesc%=OC2231.ndi, MF\OC2231_DEV1 ; Olicom Ethernet+Modem 28.8 kbps PCMCIA
%OC2232.DeviceDesc%=OC2232.ndi, MF\OC2232_DEV1 ; Olicom Ethernet+Modem 33.6 kbps PCMCIA

;******************************************************************************
; *OLC94A5 Olicom Ethernet ISA Adapter
;******************************************************************************

[*OLC94A5.ndi]
AddReg=*OLC94A5.ndi.reg,Oce2x.ndi.reg

[*OLC94A5.ndi.reg]
HKR,Ndi,DeviceID,,"*OLC94A5"

;******************************************************************************
; PCMCIA\OLICOM-ETHERCOM-1018  ; Olicom Ethernet PCMCIA old
;******************************************************************************

[OC2220A.ndi]
AddReg=OC2220A.ndi.reg,OC2220.ndi.reg,OCPCMCIA.ndi.reg, OCPCMCIAI.ndi.reg

[OC2220A.ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\OLICOM-ETHERCOM-1018"
HKR,,PCMCIAType,,1

;******************************************************************************
; PCMCIA\OLICOM-ETHERNET-3F8D  ; Olicom Ethernet PCMCIA new
;******************************************************************************

[OC2220B.ndi]
AddReg=OC2220B.ndi.reg,OC2220.ndi.reg,OCPCMCIA.ndi.reg, OCPCMCIAI.ndi.reg

[OC2220B.ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\OLICOM-ETHERNET-0C79"
HKR,,PCMCIAType,,1

;******************************************************************************
; MF\OLICOMOCE2X_DEV1  ; Olicom GoCard Ethernet + Modem 28.8 kbps PCMCIA
;******************************************************************************

[OC223X.ndi]
AddReg=OC223X.ndi.reg,OCPCMCIA.ndi.reg, OCPCMCIAIM.ndi.reg

[OC223X.ndi.reg]
HKR,Ndi,DeviceID,,"MF\OLICOMOCE2X_DEV1"
HKR,,PCMCIAType,,2

;******************************************************************************
; MF\OC2231_DEV1  ; Olicom GoCard Ethernet + Modem 28.8 kbps PCMCIA
;******************************************************************************

[OC2231.ndi]
AddReg=OC2231.ndi.reg,OCPCMCIA.ndi.reg, OCPCMCIAIM.ndi.reg

[OC2231.ndi.reg]
HKR,Ndi,DeviceID,,"MF\OC2231_DEV1"
HKR,,PCMCIAType,,2

;******************************************************************************
; MF\OC2232_DEV1  ; Olicom GoCard Ethernet + Modem 33.6 kbps PCMCIA
;******************************************************************************

[OC2232.ndi]
AddReg=OC2232.ndi.reg,OCPCMCIA.ndi.reg, OCPCMCIAIM.ndi.reg

[OC2232.ndi.reg]
HKR,Ndi,DeviceID,,"MF\OC2232_DEV1"
HKR,,PCMCIAType,,3

;******************************************************************************
; PCMCIA\OC-2220  ; Olicom Ethernet PCMCIA common
;******************************************************************************

[OC2220.ndi.reg]
; OVERRIDE FOR 4K RAM WINDOW
HKR,Override,0000,1,\
;
;
; CONFIGMG_VERSION
;
00,04,00,00, \
;
; PRIORITY
;
00,20,00,00, \
;
; I/O
;
24,00,00,00, \ ; Total length of I/O Resource Descriptor
02,00,00,00, \ ; ResTyp_IO = 0x00000002
01,00, \       ; IOD_Count;	   // 1 range of size 0x000c
0c,00, \       ; IOD_Type;	   // (IOType_Range = 0x000c)
00,00, \       ; IOD_Alloc_Base;
00,00, \       ; IOD_Alloc_End;
00,00, \       ; IOD_DesFlags;
00, \	       ; IOD_Alloc_Alias;
00, \	       ; IOD_Alloc_Decode;
e0,ff, \       ; IOR_Align;	   // Mask for base alignment (32 byte boundary)
20,00, \       ; IOR_nPorts;       // Number of ports is 32
00,00, \       ; IOR_Min;	   // Min port address
ff,ff, \       ; IOR_Max;	   // Max port address (anywhere in memory)
00,00, \       ; IOR_RangeFlags
00, \	       ; IOR_Alias
00, \	       ; IOR_Decode
c4,00,00,00, \ ; PCCARD Flags, 0x40 = 16-bit port
;
; IRQ Resource Descriptor
;
14,00,00,00, \ ; Total length of IRQ Resource Descriptor
04,00,00,00, \ ; ResType_IRQ = 0x00000004
00,00, \       ; IRQD_Flags;
00,00, \       ; IRQD_Alloc_Num;   // Allocated IRQ number
ff,ff, \       ; IRQD_Req_Mask;    // Mask of possible IRQs
00,00, \       ; IRQD_Reserved;
30,00,00,00, \ ; PCCARD flags, 0x20 = Level mode interrupts
;
; MEM Resource Descriptor
;
34,00,00,00, \ ; Total length of Memory Resource Descriptor
01,00,00,00, \ ; ResType_Mem = 0x00000001
01,00, \       ; MD_Count;	   // 1 range of size 0x0014
14,00, \       ; MD_Type;	   // (MType_Range = 0x0014)
00,00,00,00, \ ; MD_Alloc_Base;
00,00,00,00, \ ; MD_Alloc_End;
00,00, \       ; MD_Flags;
00,00, \       ; MD_Reserved;
00,F0,FF,FF, \ ; MR_Align;	   // Mask for base alignment (4K boundary)
00,10,00,00, \ ; MR_nBytes;	   // Count of bytes (4K of memory)
00,00,00,00, \ ; MR_Min;	   // Min Address
FF,FF,FF,FF, \ ; MR_Max;	   // Max Address (anywhere in memory)
00,00, \       ; MR_Flags;	   // Flags
00,00, \       ; MR_Reserved;
02,00,00,00, \ ; PCCARD flags, 0x02 = attribute mem, or
	       ;	       0x08 = 16-bit common mem
00,00,00,00, \ ; Memory card address
;
; REQUEST_CONFIG_PKT
;
19,00,00,00, \ ; Total length of REQUEST_CONFIG_PKT descriptor
7c,89,00,00, \ ;
00,00, \       ; Socket (needs not to be filled)
02,00, \       ; Attributes (Enable IRQ)
32, \	       ; Vcc
32, \	       ; Vpp1
32, \	       ; Vpp2
02, \	       ; Int type
f8,03,00,00, \ ; Configuration Register base
00, \	       ; Status
00, \	       ; Pin
00, \	       ; Copy
01, \	       ; ConfigIndex
03, \	       ; Present
;
; TERMINATOR
;
00,00,00,00



;******************************************************************************
; OCE2X Drivers
;******************************************************************************

[Oce2x.ndi.reg]
; key,subkey,valuename,type,value
HKR,,DevLoader,,*ndis
HKR,,DeviceVxDs,,Oce2xmp4.sys
HKR,,EnumPropPages,,"netdi.dll,EnumPropPages"
HKR,,Windows95,,yes

; NDIS Info
HKR,NDIS,LogDriverName,,"OCE2XMP4"
HKR,NDIS,MajorNdisVersion,1,03
HKR,NDIS,MinorNdisVersion,1,0A
HKR,Ndi\Interfaces\,DefUpper,,"ndis3"
HKR,Ndi\Interfaces\,DefLower,,"ethernet"
HKR,Ndi\Interfaces\,UpperRange,,"ndis3"
HKR,Ndi\Interfaces\,LowerRange,,"ethernet"

; Install Sections
HKR,Ndi\Install,ndis3,,"oce2x.ndis3"

; Parameters
; NetworkAddress
HKR,NDI\params\NetworkAddress,ParamDesc,,"Network Address"
HKR,NDI\params\NetworkAddress,type,,edit
HKR,NDI\params\NetworkAddress,LimitText,,18
HKR,NDI\params\NetworkAddress,UpperCase,,1
HKR,Ndi\params\NetworkAddress,default,,""
HKR,NDI\params\NetworkAddress,flag,1,20,00,00,00
HKR,Ndi\params\NetworkAddress,optional,,1


;******************************************************************************
; OCPCMCIA Drivers
;******************************************************************************

[OCPCMCIA.ndi.reg]
; key,subkey,valuename,type,value
HKR,,DevLoader,,*ndis
HKR,,DeviceVxDs,,OCE2XMP4.SYS
HKR,,EnumPropPages,,"netdi.dll,EnumPropPages"
HKR,,Windows95,,yes
;HKR,,PcmciaCtrlBase,,3E0
;HKR,,DataSize,,8
;HKR,,WaitStates,,4

; NDIS Info
HKR,NDIS,LogDriverName,,"OCE2XMP4"
HKR,NDIS,MajorNdisVersion,1,03
HKR,NDIS,MinorNdisVersion,1,0A
HKR,Ndi\Interfaces\,DefUpper,,"ndis3"
HKR,Ndi\Interfaces\,DefLower,,"ethernet"
HKR,Ndi\Interfaces\,UpperRange,,"ndis3"
HKR,Ndi\Interfaces\,LowerRange,,"ethernet"

; Parameters
; NetworkAddress
HKR,NDI\params\NetworkAddress,ParamDesc,,"Network Address"
HKR,NDI\params\NetworkAddress,type,,edit
HKR,NDI\params\NetworkAddress,LimitText,,18
HKR,NDI\params\NetworkAddress,UpperCase,,1
HKR,Ndi\params\NetworkAddress,default,,""
HKR,NDI\params\NetworkAddress,flag,1,20,00,00,00
HKR,Ndi\params\NetworkAddress,optional,,1

[OCPCMCIAI.ndi.reg]
; Install Sections
HKR,Ndi\Install,ndis3,,"OCPCMCIA.ndis3"

[OCPCMCIAIM.ndi.reg]
; Install Sections
HKR,Ndi\Install,ndis3,,"OCPCMCIAM.ndis3"

; Install NDIS3
[Oce2x.ndis3]
AddReg=Oce2x.ndis3.AddReg
CopyFiles=oce2x.ndis3.CopyFiles

[Oce2x.ndis3.AddReg]
HKR,,IoBase,1,02,00,00,00
HKR,,Interrupt,1,04,00,00,00

[OCPCMCIA.ndis3]
AddReg=OCPCMCIA.ndis3.AddReg
CopyFiles=oce2x.ndis3.CopyFiles

[OCPCMCIAM.ndis3]
AddReg=OCPCMCIA.ndis3.AddReg

[OCPCMCIA.ndis3.AddReg]
HKR,,IoBase,1,02,00,00,00
HKR,,Interrupt,1,04,00,00,00
HKR,,MemoryBaseAddress,1,01,00,00,00

;******************************************************************************
; Files to copy
;******************************************************************************

[oce2x.ndis3.CopyFiles]
oce2xmp4.sys

;******************************************************************************
; Destination Directories
;******************************************************************************

[DestinationDirs]
oce2x.ndis3.CopyFiles=11 ; LDID_SYS

;******************************************************************************
; Localizable Strings
;******************************************************************************

[strings]
;
; Provider
;
V_MS="Microsoft"
P_Olicom="Olicom"
;
; Manufacturers
;
M_Olicom="Olicom"
;
; PNP Devices, Olicom
;
*OLC94A5.DeviceDesc="Olicom Ethernet ISA/IV Adapter (OC-217x)"
OC2220A.DeviceDesc="Olicom GoCard Ethernet PC Card (OC-2220)"
OC2220B.DeviceDesc="Olicom GoCard Ethernet PC Card (OC-2220)"
OC223X.DeviceDesc="Olicom GoCard Ethernet (MF)"
OC2231.DeviceDesc="Olicom GoCard Ethernet (MF)"
OC2232.DeviceDesc="Olicom GoCard Ethernet (MF)"

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.30