msdos.inf Driver File Contents (polaroidpdc3035driver.zip)

; Setup Information File
; Copyright 1993-1995, Microsoft Corporation

[version]
LayoutFile= Layout.inf, Layout1.inf, Layout2.inf
signature="$CHICAGO$"
SetupClass=BASE

[Data]
NumFreeBootEntries = 20
NumFreeHostEntries = 20
MinSwapFile        = 24117248   ; 23 meg (23*1024*1024) minimum swapspace
DifDrvSwapAdd      = 20971520   ; 20 meg (20*1024*1024) add'l swapspace needed when swapfile drive != windows drive
EBDTolerance       = 10         ; Allow 10% bad sectors on EBD floppy
CompressFactor=15               ; Compression factor time 10, ie: 1.5 -> 15
StacOldCmprsFactor=20           ; Assuming 2 to 1 will be reported.

[DestinationDirs]
EBD_CopyFiles      = 2, EBD     ; Files for emergency boot disk
EBD_CopyFiles2     = 2, EBD
EBD_MSCDEX         = 2, EBD     ; MSCDEX for emergency boot disk
defaultdestdir     = 10         ; LDID_WIN
MSDOS_INF_COPY     = 17         ; LDID_INF
PNPCleanup.files   = 17         ; LDID_INF
SBSCfgSysCopy      = 26         ; LDID_WINBOOT
SBSAutoModeCopy    = 26         ; LDID_WINBOOT
SBSAutoKeybCopy    = 26         ; LDID_WINBOOT

[BaseWinOptions]
MSDOS_BASE

[MSDOS_BASE]
CopyFiles = MSDOS_INF_COPY
AddReg    = MSDOS_ADDREG

[MSDOS_INF_COPY]
msdos.inf

[MSDOS_ADDREG]
  ; restore lines that were commented out in config.sys and autoexec.bat
HKLM,%KEY_RUNONCE%,RestoreCfgAuto,,"RUNDLL.EXE %11%\SETUPX.DLL,CfgClean1stBoot /RESTORE %17%\msdos.inf"

; This section has the list of files that we will copy from user's hard disk
; Old DOS dir to WIN95 dir (if files are present).
;
[SetupListNonSrcDiskFiles]
CHKSTATE.SYS
MEMMAKER.EXE
MEMMAKER.INF
MEMMAKER.HLP
SIZER.EXE


[dospath_key_files]
; We try to find any 3 of the following files in a directory 
; before we assume it is a MS-DOS installation dir.
MODE.EXE
MODE.COM
FDISK.EXE
FDISK.COM
FORMAT.EXE
FORMAT.COM
GRAPHICS.EXE
GRAPHICS.COM
JOIN.EXE
JOIN.COM
SUBST.EXE
SUBST.COM


[KnownOkTasks]
; This is a list of tasks which we know are OK to keep running
; during Setup. If setup sees any tasks which are not in this
; list it will send a query to see if it's OK for Windows
; to shutdown

atikey.exe
autorun.exe
systray.exe
batmeter.exe
cab32.exe
clipsrv.exe
clock.exe
comctl32.dll
commctrl.dll
dash.exe
ddeml.dll
directcc.exe
drwatson.exe
exiticon.exe
explorer.exe
fileman.exe
iexplore.exe
imejp98m.exe
internat.exe
krnl386.exe
mapix32.dll
mmmixer.dll
mmsystem.dll
mmtask.tsk
mplayer.exe
msgsrv32.exe
msndc.exe
msnviewr.exe
mcdetect.exe
ndw.exe
ndwmain.exe
ndwin2.dll
netdde.exe
nwpopup.exe
nwin2.dll
nwres2.dll
penpal.exe
penwin.dll
pmnotfy.exe
pointer.dll
pointer.exe
printman.exe
progman.exe
runonce.exe
scout.exe
shdocvw.dll
shell32.dll
setup.exe
setupx.dll
scout.exe
sndevnts.drv
spool32.exe
suwin.exe
tabworks.exe
tapeng.exe
taskman.exe
tracker.bin
tuibar.exe
user.exe
winfile.exe
winhelp.exe
winmine.exe
winmm16.dll
winsetup.bin
winsetup.exe
w98setup.bin
winver.exe
wndt.exe ;central point pctools shell
wnom.dll ;central point pctools shell
wnlssub.exe
; Following exes are for Office95
fastboot.exe
findfast.exe
msoffice.exe
;SMS exes
smsrun16.exe
pcmwin16.exe
usertsr.exe
sage.exe
microsoftexplorer.exe
lnet32.exe
shdoc401.dll
browseui.dll

[ToshibaBIOS]
memory=f000,e010,S,"TOSHIBA"

[ToshibaMfg]
ToshibaBIOS

[KnownBlockDrivers]
11,,ltmodem.vxd,ToshibaMfg,1.16.0.0,1.16.0.0,%ToshibaMsg1%
11,,ltmodem.vxd,ToshibaMfg,2.16.0.0,2.16.0.0,%ToshibaMsg1%
11,,spower.drv,ToshibaMfg,,,%ToshibaMsg2%

; commands to remove from config.sys during 1st boot
;
[Cfg1stBootClean]
386max
386load
emm386,highscan,1
emm386
qemm
qemm386
cardxtnd
power,,1
vc
es1868,,1
ibmtpcd,,1
egret100,,1
cpqidecd,,1

; commands to remove from autoexec.bat during 1st boot
;
[Auto1stBootClean]
vshield
aztpnp,,1
pcscan
guard
tsrscan
ibmavsh
scanpm
examine,,,%CheyenneAV%,%CheyenneMsg1%,%CheyenneMsg2%
nav,,,%NortonAV%,%NortonMsg1%,%NortonMsg2%
navdx
navboot
esscfg,,1
essvol,,1
resume
aspiif,,1
au30dos
asp4dos
cwcmidi

; lines to remove from the registry during 1st boot
;
[Reg1stBootClean]
  ; remove Norton AV
HKLM,%KEY_RUN%,,navapw32.exe,0
HKLM,%KEY_RUNSERVICES%,nprotect,,0
HKLM,%KEY_RUNSERVICES%,,nprotect.vxd,0
HKLM,%KEY_VXD%\NAVAP,StaticVxD,navap.vxd,1
HKLM,%KEY_VXD%\SYMEVNT,StaticVxD,symevnt.386,1
  ; remove Task Scheduler
HKLM,%KEY_RUNSERVICES%,,mstask.exe,0
  ; remove McAfee
HKLM,%KEY_RUN%,,vshwin32.exe,0
HKLM,%KEY_RUNSERVICES%,,vshwin32.exe,0
  ; disable sounds for startup and close program
HKCU,AppEvents\Schemes\Apps\.Default\Close\.Current,,,0
HKCU,AppEvents\Schemes\Apps\.Default\Open\.Current,,,0
HKCU,AppEvents\Schemes\Apps\.Default\SystemExit\.Current,,,0
HKCU,AppEvents\Schemes\Apps\.Default\SystemStart\.Current,,,0
HKU,.Default\AppEvents\Schemes\Apps\.Default\Close\.Current,,,0
HKU,.Default\AppEvents\Schemes\Apps\.Default\Open\.Current,,,0
HKU,.Default\AppEvents\Schemes\Apps\.Default\SystemExit\.Current,,,0
HKU,.Default\AppEvents\Schemes\Apps\.Default\SystemStart\.Current,,,0
  ; block various anti virus programs
HKLM,%KEY_VXD%\APVXD,StaticVxD,,0
HKLM,%KEY_VXD%\WinGuard,StaticVxD,,1
HKLM,%KEY_RUN%,,tbload32.exe,0
HKLM,%KEY_RUN%,,apvxdwin.exe,0
HKLM,%KEY_RUNSERVICES%,,apvxdwin.exe,0
HKLM,%KEY_RUNSERVICES%,,wgfe.exe,0
HKLM,%KEY_RUNSERVICES%,Winguard,,0
HKLM,%KEY_RUN%,,dvp95.exe,0
HKLM,%KEY_RUN%,,isrv95.exe,0
HKLM,%KEY_RUN%,,realmon.exe,0
HKLM,%KEY_RUN%,,virusafe,0
  ; remove MS Phone 2.0
HKLM,%KEY_RUN%,,msphone.exe,0
HKLM,%KEY_RUNSERVICES%,,msphone.exe,0
  ; remove DMI software
HKLM,%KEY_RUN%,,dmistart,0
HKLM,%KEY_RUNSERVICES%,,dmistart,0
  ; remove Cleansweep Deluxe
HKLM,%KEY_RUNSERVICES%,,csinject,0
  ; remove Compaq Autologon during Setup
HKLM,System\CurrentControlSet\control\MPRServices\CompaqAutoLogon,DllName,,1
HKLM,System\CurrentControlSet\control\MPRServices\CompaqAutoLogon,EntryPoint,,1
  ; remove Remotely Possible 32 Host Provider
HKLM,%KEY_VXD%\RP32VXD,StaticVxD,rp32.vxd,0
HKLM,%KEY_RUNSERVICES%,,rp32m.exe,0


[CfgCleanKeep]
country
drivparm
keyb
menucolor
menudefault
menuitem
numlock
power
set
submenu
switches

DBLSPACE.SYS
DBLSPACE.BIN
DRVSPACE.SYS
DRIVER.SYS

; Installed by MM setup:
asp.sys
csp.sys

; From Beta Feedback:
MTMCDAE.SYS
STACKER.COM
SSWAP.COM

; From ios.ini:
aspi4dos.sys    ; adaptec
aspi7dos.sys
aspiedos.sys
aspi2dos.sys
int13fcam.sys
;emm386.exe
aspidisk.sys
aspifcam.sys
fddevice.sys
dcam1800.exe
dcam950.exe
dcam7ex.exe
fdbios.sys
;smartdrv.exe
;scplus.exe
slcd.sys
pcds.sys
dptddl.sys
btdosm.sys
btmdisk.sys
aspimgr.sys
uspi14.sys
uspi24.sys
ultrarem.sys
rcd.sys
dosoad.sys
aspipc2.sys
aspipc4.sys
aspipc8.sys
aspipc8p.sys
aspippa3.sys
;interlnk.exe, NON_DISK
;ramdrive.sys, NON_DISK
;dblspace.*
ma100.sys
ma120.sys
ma130.sys
ma13b.sys
ma160.sys
ma200.sys
ma338.sys
ma348.sys
ma358.sys
mamv1.sys
tscsi.sys
casmgr.exe
faxpop.exe
;dosdata.sys    ; Qemm
ibmcdrom.sys
mtmcde.sys      ; Mitsumi
tslcdr.sys      ; Trantor
ultracd.sys     ; Ultrastor
;doskey.exe     ; MS-DOS
power.exe       ; MS-DOS
cuni_asp.sys    ; Corel
aspils_d.sys    ; Corel

[AutoCleanKeep]
set
PATH
net
REM
netstart
echo

Chcp
keyb
Mode
Nlsfunc
Prompt
chkdsk
ScanDisk

; From MM Setup:
sb16set
sbconfig
sbp-set

; from beta feedback:
STACKER.COM
SSWAP.COM

; from ios.ini:
power.exe       ; MS-DOS

[GenInstallEBD]
CopyFiles=EBD_CopyFiles

[GenInstallEBD2]
CopyFiles=EBD_CopyFiles2

[GenInstallMSCDEXEBD]
CopyFiles=EBD_MSCDEX

[EBD_CopyFiles]
  ; Files to copy to first Emergency Boot Disk
io.sys,winboot.sys,,2
autoexec.bat,autoexec.ebd,,2
config.sys,config.ebd,,2
setramd.bat,setramd.ebd,,2
readme.txt,readme.ebd,,2
findramd.exe,,,2
ramdrive.sys,,,2
aspi4dos.sys,,,2
btcdrom.sys,,,2
aspicd.sys,,,2
btdosm.sys,,,2
aspi2dos.sys,,,2
aspi8dos.sys,,,2
aspi8u2.sys,,,2
flashpt.sys,,,2
extract.exe,,,2
fdisk.exe,,,2
drvspace.bin,,,2
command.com,,,2
himem.sys,,,2
oakcdrom.sys,,,2

[EBD_CopyFiles2]
  ; Files that can go on a 2nd EBD if necessary
ebd.cab,,,2  ; this should always be the last file



;these didn't make the cut:
;msd.exe,,,2
;xcopy.exe,,,2
;edit.hlp,,,2
;fc.exe,,,2
;mem.exe,,,2
;more.com,,,2
;setver.exe,,,2
;emm386.exe,,,2

[EBD_MSCDEX]
mscdex.exe,,,2

[BadCfgFiles]
;; filename - good date   - Reference to Getting starting section
"SSTOR.SYS"   , "03/01/91", %IDS_ERR_SPEEDSTOR%
"DMDRVR.BIN"  , "03/01/91", %IDS_ERR_DMDRVER%
"FIXT_DRV.SYS", "00/00/00", %IDS_ERR_VFEATURE%
;"SYDRIVER.SYS", "00/00/00", %IDS_ERR_SYQUEST%
;"SQDRIVER.SYS", "00/00/00", %IDS_ERR_SYQUEST%

[BadAutoexecCmd]
"DELWATCH"    , "00/00/00", %IDS_ERR_DELWATCH%

[NonMSDOSCfgSys]
chain
gosub
hibuffers
hidevice
hidos
hiinstall
history
return
switch
timeout

; 
BASEDEV
DEVINFO
DISKCACHE
IFS
IOPL
LIBPATH
MAXWAIT
MEMMAN
PRINTMONBUFSIZE
PRIORITY_DISK_IO
PROTECTONLY
PROTSHELL
SWAPPATH
THREADS

[NonMSDOSAutoBat]
gosub
hiload
return
switch

[DriveProviders]
aspidisk.sys
aspi4dos.sys
atdoshc.sys
atdosxl.sys
aspipc16.sys            ; Iomega aspi clone
dmdrvr.bin              ; Ontrack Disk Manager
fddevice.sys            ; Future Domain device driver
scsidrvr.sys            ; Iomega scsi device driver
sstordrv.sys            ; can be used to create a new drive letter
stachigh.sys            ; Stac 4.0 driver
stacker.com             ; can be used to create a new drive letter
xtradrv.sys             ; XtraDrive 3.0 driver

[strings]
IDS_ERR_SPEEDSTOR = "SpeedStor Partitions"
IDS_ERR_DMDRVER   = "DiskManager Partitions"
IDS_ERR_VFEATURE  = "Vfeature Deluxe"
IDS_ERR_DELWATCH  = "Delwatch and Delpurge"
;IDS_ERR_SYQUEST   = "Syquest Harddisk"
;IDS_ERR_SYQUEST   = "Syquest Harddisk"
KEY_RUN           = "Software\Microsoft\Windows\CurrentVersion\Run"
KEY_RUNONCE       = "Software\Microsoft\Windows\CurrentVersion\RunOnce"
KEY_RUNSERVICES   = "Software\Microsoft\Windows\CurrentVersion\RunServices"
KEY_VXD           = "System\CurrentControlSet\Services\VxD"
CheyenneAV		  = "Cheyenne AntiVirus"
CheyenneMsg1	  = "When your computer restarts, your anti-virus software may ask whether you want to accept certain system changes that were made by Windows 98 Setup during the upgrade process."
CheyenneMsg2      = "For Windows 98 to function properly, you must accept these changes by typing 'A' in response to each prompt."
NortonAV		  = "Norton AntiVirus"
NortonMsg1		  = "When your computer restarts, your anti-virus software may inform you that your hard disk's boot record has changed and ask what you want to do."
NortonMsg2		  = "For Windows 98 to function properly, you must choose the Inoculate option."
ToshibaMsg1 = "This computer’s modem driver is not compatible with the Windows 98 Second Edition upgrade. For information on upgrading the driver, see the Hardware Notes section in SETUP.TXT. This file is in the Win98 folder on the Windows 98 Second Edition CD."
ToshibaMsg2 = "Toshiba Windows 95 Utilities is not compatible with the Windows 98 Second Edition upgrade. To uninstall this service, refer to the Hardware Notes section in SETUP.TXT. This file is in the Win98 folder on your Windows 98 Second Edition CD."

[PnpCleanup]
DelReg = PnpCleanup.DelReg
DelFiles=PNPCleanup.files

[PNPCleanup.files]
eisa.inf
mca.inf

[PnpCleanup.DelReg]
; These were done as a temporary action for bld 156 when we changed devloader
; and registry stuff.
HKLM,Config
HKLM,Enum
HKLM,Hardware
;Removed to avoid nuking printer information.
;HKLM,System  
;Removed to avoid nuking Computer Name on upgrades, looks safe.
;HKLM,System\CurrentControlSet\Control\ComputerName
HKLM,System\CurrentControlSet\Control\FileSystem
HKLM,System\CurrentControlSet\Control\IDConfigDB
HKLM,System\CurrentControlSet\Control\Keyboard Layouts
HKLM,System\CurrentControlSet\Control\MediaProperties
HKLM,System\CurrentControlSet\Control\MediaResources
HKLM,System\CurrentControlSet\Control\NetworkProvider
HKLM,System\CurrentControlSet\Control\Nls
HKLM,System\CurrentControlSet\Control\PerfStats
HKLM,System\CurrentControlSet\Control\SessionManager
;Removed because such a pain to reset time zone all the time...
;HKLM,System\CurrentControlSet\Control\TimeZoneInformation
HKLM,System\CurrentControlSet\Control\Update
HKLM,System\CurrentControlSet\Services

[InstalledFilesCleanup]
DelReg = InstalledFiles.DelReg

[InstalledFiles.DelReg]
HKLM,System\CurrentControlSet\Control\InstalledFiles

;[TmpCleanup]
;DelReg = Cleanup.DelReg

[Cleanup.DelReg]
; These were done as a temporary action for bld 156 when we changed devloader
; and registry stuff.
;HKLM,Enum
; BEGIN Network related stuff. 
; Has to be done because of the above HKLM,Enum deletion
;HKLM,System\CurrentControlSet\Services\vxd\vnetsup
;HKLM,System\CurrentControlSet\Services\vxd\wsock
;HKLM,System\CurrentControlSet\Services\vxd\ndis
;HKLM,System\CurrentControlSet\Services\vxd\vnetbios
;HKLM,System\CurrentControlSet\Services\vxd\vubxd
;HKLM,System\CurrentControlSet\Services\vxd\vredir
;HKLM,System\CurrentControlSet\Services\vxd\nwredir
;HKLM,System\CurrentControlSet\Services\vxd\lantasti
;HKLM,System\CurrentControlSet\Services\vxd\vvinesd
;HKLM,System\CurrentControlSet\Services\vxd\bwdosnet
;HKLM,System\CurrentControlSet\Services\vxd\bwredir
;HKLM,System\CurrentControlSet\Services\vxd\decnet
;HKLM,System\CurrentControlSet\Services\vxd\decnb
;HKLM,System\CurrentControlSet\Services\vxd\dosnet
;HKLM,System\CurrentControlSet\Services\vxd\vnetware
;HKLM,System\CurrentControlSet\Services\vxd\vipx
;HKLM,System\CurrentControlSet\Services\vxd\pcnfs
;HKLM,System\CurrentControlSet\Services\vxd\vserver
;HKLM,System\CurrentControlSet\Services\vxd\nwserver
;HKLM,System\CurrentControlSet\Services\vxd\filesec
;HKLM,System\CurrentControlSet\Services\vxd\nscl
;HKLM,System\CurrentControlSet\Services\vxd\nwsp
;HKLM,System\CurrentControlSet\Services\vxd\netbeui
;HKLM,System\CurrentControlSet\Services\vxd\nwlink
;HKLM,System\CurrentControlSet\Services\vxd\nwnblink
;HKLM,System\CurrentControlSet\Services\vxd\decpw
;HKLM,System\CurrentControlSet\Services\nwnp32
;HKLM,System\CurrentControlSet\Services\msnp32
;HKLM,System\CurrentControlSet\Services\lantnet
;HKLM,System\CurrentControlSet\Services\vines
;HKLM,System\CurrentControlSet\Services\bwnet
;HKLM,System\CurrentControlSet\Services\pcsa
;HKLM,System\CurrentControlSet\Services\lanman
;HKLM,System\CurrentControlSet\Services\lansrv
;HKLM,System\CurrentControlSet\Services\msnet
;HKLM,System\CurrentControlSet\Services\pcnfs
;HKLM,System\CurrentControlSet\Services\wtnet
;HKLM,System\CurrentControlSet\Services\ncpserver
;HKLM,System\CurrentControlSet\Services\snmp
;HKLM,System\CurrentControlSet\Services\pathwrks
;HKLM,System\CurrentControlSet\Control\NetworkProvider
;HKLM,"System\CurrentControlSet\Control\Print\Providers\MS Network Print Provider"
;HKLM,"System\CurrentControlSet\Control\Print\Providers\NetWare Print Provider"
;HKLM,Software\Microsoft\Rpc\ClientProtocols,ncacn_nb_ipx,
;HKLM,Software\Microsoft\Rpc\ClientProtocols,ncacn_spx,
;HKLM,Software\Microsoft\Rpc\ServerProtocols,ncacn_spx,
;HKLM,Software\Microsoft\Rpc\ClientProtocols,ncacn_nb_ipx,
;HKLM,Software\Microsoft\Rpc\ClientProtocols,ncacn_np,
;HKLM,Software\Microsoft\RFC1156Agent\CurrentVersion
;HKLM,Security\Provider,Platform_type
;HKLM,Security\Provider,Container
;HKLM,Security\Provider,Address_Server
;HKLM,Security\Provider,Address_Book
;HKLM,Security\Provider,Pass_Through
;HKLM,"Software\Microsoft\Windows\CurrentVersion\Network\Real Mode Net",dllndis.exe
;HKLM,"Software\Microsoft\Windows\CurrentVersion\Network\Real Mode Net",dllndist.exe
;HKLM,"Software\Microsoft\Windows\CurrentVersion\Network\Real Mode Net",ipxndis.exe
; END Network related stuff. 
;HKLM,SYSTEM\CurrentControlSet\Services\Class

;SBSIntlCfgSys, SBSIntlAutoMode and SBSIntlAutoKeyb are hardcoded in Code
; Dont change these names
[SBSIntlCfgSys]
CopyFiles = SBSCfgSysCopy
UpdateCfgSys=SBSDummy

[SBSCfgSysCopy]
Country.sys
Display.sys

[SBSIntlAutoMode]
CopyFiles = SBSAutoModeCopy
UpdateAutoBat=SBSDummy

[SBSAutoModeCopy]
mode.com

[SBSIntlAutoKeyb]
CopyFiles = SBSAutoKeybCopy
UpdateAutoBat=SBSDummy

[SBSAutoKeybCopy]
keyb.com

; Dummy section to fixup the path for display.sys, keyb.com and mode.com
[SBSDummy]
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 2.12