;===================================================================
;
; Mf8020m.Inf
;
; SMC 9000 Multifunction Ethernet/Modem Adapter Install for Windows
;
; Copyright (c) 1995,1996 Standard Microsystems Corporation.
;
;===================================================================
[Version]
Signature="$CHICAGO$"
Provider=%MS%
Class=Multifunction
LayoutFile=layout.inf, layout1.inf, layout2.inf
CatalogFile=mf8020m.cat
[Manufacturer]
%String1%=SMC
[SMC]
; %Adapter1% = Adapter1.mf,PCMCIA\SMC-ETHEREZ_ETHERNET/MODEM_8020-1FB2
%Adapter1% = Adapter1.mf,PCMCIA\SMC-ETHEREZ_ETHERNET/MODEM_8020-5A1C
[Strings]
MS = "Microsoft"
String1 = "SMC"
Adapter1 = "SMC EtherEZ PC Card + Modem"
[Adapter1.mf]
AddReg = Smc.reg,OverRide.reg
CopyFiles=Smc9000.ndis3.CopyFiles
[Adapter1.mf.HW]
AddReg = SmcPcm1.reg.HW
[SmcPcm1.reg.HW]
HKR,Child0000,HardwareID,,MF\SMC8000_DEV0
HKR,Child0000,ResourceMap,1,00,02
HKR,Child0001,HardwareID,,MF\SMC8000_DEV1
HKR,Child0001,ResourceMap,1,00,01,02,03
[Smc.reg]
HKR,,DevLoader,,*CONFIGMG
HKR,,Enumerator,,*CONFIGMG
HKR,,CMDrivFlags,01,03,00,00,00
[OverRide.reg]
HKR,Override,0000,1, \
;
; CONFIGMG_VERSION
;
00,04,00,00, \
;
; PRIORITY
;
00,50,00,00, \
;
; I/O Resource Descriptor 0
;
48,00,00,00, \ ; Total length of I/O Resource Descriptor
02,00,00,00, \ ; ResType_IO = 0x00000002
04,00, \ ; IOD_Count
0C,00, \ ; IOD_Type IOType_Range = 0x000C
00,00, \ ; IOD_Alloc_Base
00,00, \ ; IOD_Alloc_End
00,00, \ ; IOD_DesFlags
00, \ ; IOD_Alloc_Alias
00, \ ; IOD_Alloc_Decode
; COM1
F8,FF, \ ; IOR_Align // 8 byte align
08,00, \ ; IOR_nPorts // 8 ports
F8,03, \ ; IOR_Min
FF,03, \ ; IOR_Max
00,00, \ ; IOR_RangeFlags
00, \ ; IOR_Alias
00, \ ; IOR_Decode
; COM2
F8,FF, \ ; IOR_Align // 8 byte align
08,00, \ ; IOR_nPorts // 8 ports
F8,02, \ ; IOR_Min
FF,02, \ ; IOR_Max
00,00, \ ; IOR_RangeFlags
00, \ ; IOR_Alias
00, \ ; IOR_Decode
; COM3
F8,FF, \ ; IOR_Align // 8 byte align
08,00, \ ; IOR_nPorts // 8 ports
E8,03, \ ; IOR_Min
EF,03, \ ; IOR_Max
00,00, \ ; IOR_RangeFlags
00, \ ; IOR_Alias
00, \ ; IOR_Decode
; COM4
F8,FF, \ ; IOR_Align // 8 byte align
08,00, \ ; IOR_nPorts // 8 ports
E8,02, \ ; IOR_Min
EF,02, \ ; IOR_Max
00,00, \ ; IOR_RangeFlags
00, \ ; IOR_Alias
00, \ ; IOR_Decode
;
64,00,00,00, \ ; PCCARD flags, 0x40 = 16-bit port
;
; I/O Resource Descriptor 1
;
24,00,00,00, \ ; Total length of I/O Resource Descriptor
02,00,00,00, \ ; ResType_IO = 0x00000002
01,00, \ ; IOD_Count
0C,00, \ ; IOD_Type IOType_Range = 0x000C
00,00, \ ; IOD_Alloc_Base
00,00, \ ; IOD_Alloc_End
00,00, \ ; IOD_DesFlags
00, \ ; IOD_Alloc_Alias
00, \ ; IOD_Alloc_Decode
F0,FF, \ ; IOR_Align // 16 byte Mask for base alignment
10,00, \ ; IOR_nPorts // 16 ports
00,02, \ ; IOR_Min // Min port address
ff,ff, \ ; IOR_Max // Max port address
00,00, \ ; IOR_RangeFlags
00, \ ; IOR_Alias
00, \ ; IOR_Decode
64,00,00,00, \ ; PCCARD flags, 0x40 = 16-bit port
;
; IRQ Resource Descriptor 0
;
14,00,00,00, \ ; Total length of IRQ Resource Descriptor
04,00,00,00, \ ; ResType_IRQ = 0x00000004
00,00, \ ; IRQD_Flags
00,00, \ ; IRQD_Alloc_Num
FF,FF, \ ; IRQD_Req_Mask
00,00, \ ; IRQD_Reserved
20,00,00,00, \ ; PCCARD flags, 0x20 = Level mode int's
;
; Memory Resource Descriptor 0
;
34,00,00,00, \ ; Total length of Memory Descriptor
01,00,00,00, \ ; ResType_Mem = 0x00000001
01,00, \ ; MD_Count
14,00, \ ; MD_Type
00,00,00,00, \ ; MD_Alloc_Base
00,00,00,00, \ ; MD_Alloc_End
00,00, \ ; MD_Flags
00,00, \ ; MD_Reserved
00,F0,FF,FF, \ ; MR_Align
00,10,00,00, \ ; MR_nBytes
00,00,00,00, \ ; MR_Min
FF,FF,FF,FF, \ ; MR_Max
00,00, \ ; MR_Flags
00,00, \ ; MR_Reserved
02,00,00,00, \ ; PCCARD flags, 0x02 = attribute mem, or
; 0x08 = 16-bit common mem
00,80,00,00, \ ; Memory card address offset
;
; REQUEST_CONFIG_PKT
;
19,00,00,00, \ ; Length of REQUEST_CONFIG_PKT Descriptor
7C,89,00,00, \ ; ResType_Ignored_Bit + PCCARD_DEVICE 0x897C
00,00, \ ; Socket
02,00, \ ; Attributes
32, \ ; Vcc
32, \ ; Vpp1
32, \ ; Vpp2
02, \ ; IntType
20,80,00,00, \ ; ConfigBase
08, \ ; Status
00, \ ; Pin
00, \ ; Copy
05, \ ; ConfigIndex
07, \ ; Present
;
; TERMINATOR
;
00,00,00,00
[Smc9000.ndis3.CopyFiles]
smc8020m.sys
[DestinationDirs]
DefaultDestDir = 11
Smc9000.ndis3.CopyFiles = 11
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.