1. 4340h026.zip Driver
2. config.ini File Contents

config.ini Driver File Contents (4340h026.zip)

; ***** Maestro-3i *****
;localization strings
100=ESS Aux
101=ESS CD-Audio
102=ESS Wavetable Synthesis
103=ESS Record
104=ESS Playback
105=ESS Mixer

;about mixer
106=20dB
107=Meter
108=Mute
109=Record Source

121=Volume Control
122=Vol
123=Recording Control
124=Rec
   
; for allegro, no Aux, no Video on playback mixer
; for Maestro3, Aux and Video on playback mixer
; for recording mixer
;	only name is different
;	Maestro3(Aux, Video) - Allegro(mono_mix, dmix) 
; system source lines
;
125=Line
126=CD
127=Aux
128=Video
129=Microphone
130=Phone-In
131=Mixer
132=Monomix

133=Synth
134=Wave
135=MonoOut

; docking source lines
;
141=Line 2
142=CD 2
143=Aux 2
144=Video 2
145=Microphone 2
146=Phone-In 2
147=Mixer 2
148=Monomix 2

149=Dock Spkr
150=System Spkr

151=Power Management Enable
152=Level-1/Level-2

153=Mic-2
154=PC Speaker
155=PC Speaker 2

156=SPDIF In
157=IIS 2
158=Enable SPDIF

;--------------------------------------------------------------------------
; In order to take advantage of the following features, you have to 
;     1) take out the first column of ";" from each line you want to use.
;     2) change the right hand side value of "=" depending on need.
;     3) take out ";" from the  line containing ;config.ini 
;	 between [allem3] and 1:allem3.sys in file "oemsetup.inf".
; (Here, a line starting with ";" means it's commented out.)
;--------------------------------------------------------------------------

;
; ** START MIXER CUSTOMIZATION for NORMAL/DOCK/UNDOCK States **
;
; Values are Double Word based in reversed format,
; (eg. "03,02,01,00" is really 00010203 Hex)
;
; Bit 0 is for Dock             (1 = Enable Control, 0 otherwise)
; Bit 1 is for UnDock           (1 = Enable Control, 0 otherwise)
;

; System CODEC Source Map Output (CD, LINE, AUX, etc.)
SystemCD_Out=3           ; Undocked=YES, Docked=YES
SystemLINE_Out=3         ; Undocked=YES, Docked=YES
SystemAUX_Out=2          ; Undocked=YES, Docked=NO
SystemVIDEO_Out=3        ; Undocked=YES, Docked=YES
SystemMIC_Out=3          ; Undocked=YES, Docked=YES
SystemPHONE_Out=3        ; Undocked=YES, Docked=YES
SystemPCBEEP_Out=3       ; Undocked=NO,  Docked=NO
;for M3I, set S/PDIF IN
SystemIIS_Out=2          ; Undocked=NO,  Docked=NO

; System CODEC Source Map Input (CD, LINE, AUX, etc.)
SystemCD_In=3            ; Undocked=YES, Docked=YES
SystemLINE_In=3          ; Undocked=YES, Docked=YES
SystemMIC_In=3           ; Undocked=YES, Docked=YES
SystemMIXER_In=3         ; Undocked=YES, Docked=YES

; Docking CODEC Source Map Output (CD, LINE, AUX, etc.)
DockCD_Out=1             ; Undocked=NO, Docked=YES
DockLINE_Out=1           ; Undocked=NO, Docked=YES
DockAUX_Out=0            ; Undocked=NO, Docked=NO
DockVIDEO_Out=0          ; Undocked=NO, Docked=NO
DockMIC_Out=1            ; Undocked=NO, Docked=YES
DockPHONE_Out=0          ; Undocked=NO, Docked=NO
DockPCBEEP_Out=0         ; Undocked=NO, Docked=NO

; Docking CODEC Source Map Input (CD, LINE, AUX, etc.)
DockCD_In=1              ; Undocked=NO, Docked=YES
DockLINE_In=1            ; Undocked=NO, Docked=YES
DockMIC_In=1             ; Undocked=NO, Docked=YES
DockMIXER_In=1           ; Undocked=NO, Docked=YES

;
; ** OTHER CUSTOMIZATIONS **
;

;Mic20dBOn=0		; 1/0 = enable/disable Mic Volume 20dB boost
;enableMPU401=1         ; 1/0 = enable/disable MPU401
;
; comment out 2 lines for HP
;enableHwVol=1           ; 1/0 = enable/disable Hardware Volume Control
;SoftexAPM=1		; 1/0 = enable/disable Softex Power Management Support
;
; Change the first 0 to 1 to enable secondary AC97 line out detection
; Disable secondary AC97 line out detection
;DetectDockingLineOut=1
;DefaultPCSpeakerMute=0 ; 1/0 = default of PC Speaker is mute/unmute (* AC97 Codec ONLY *)

;EnableDockingAllinAllout=1	; 1/0 = enable/disable All-in-All-out
;DefaultMasterVol=A0A0 ; hex value (0000-FFFF)
;
; allegro = 0x1800(ibm and ref), M3=0x1100
;Eapd Support Mode=1
;Eapd GPO Polarity And Port=0x1800

; default is no SPDIF out
; Enable SPDIF out, remove the ";"
;EnableSPDIF=1

; 00: To Pin #62 ; GPIO 11 for SPDIF-out
; 01: To Pin #2
;SPDIF Out Pin Connect Mode=1

; applied to only M3I.COMM
; 0/1: disable/enable SPDIFIN
EnableSPDIFIN=1