readme.txt Driver File Contents (9520538.exe)

Perform the following steps to update the BIOS on a 930 Server.  Two blank,
formatted diskettes are required.

NOTE:  Before attempting a BIOS Flash, first enter the system BIOS and
       note all settings so they can be re-applied after the flash has
       been completed. The update restores the BIOS to the default 

1.  Insert a blank high-density diskette into A:\.

2.  Click "Start\Run", type "Sys A:\" and press <ENTER>.  This will create a
    bootable diskette.  Label this disk, "Disk 1".

    NOTE:  To make a bootable disk, make the floppy disk on a computer
           running Windows 95 or Windows 98.

3.  Insert Disk 2.  Extract the BIOS update files and copy them to this
    diskette.  Label this disk "Disk 2".

4.  Insert Disk 1 and power the system on.

5.  When the system has finished booting and is at an A:\ prompt, remove Disk
    1 and insert Disk 2. Type "flash" and press <ENTER>.
    The BIOS update will proceed automatically.

6.  When the BIOS update is complete, the following message will appear.

7.  Press <CTRL>+<ALT>+<DEL> to reboot the system and press <F1> to enter
    the system BIOS.  Set the date, time, boot priority and any other
    changed settings noted prior to the update.  Press F10 to save the
    settings and exit.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.19