Installing the PCMCIA Ethernet Card Drivers
For
Novell NetWare ODI DOS Client
=============================================
This file contains information about using the PCMODI.COM Novell DOS
client ODI driver with your PCMCIA Ethernet Adapter.
The PCMCIA Ethernet Adapter drivers for Netware client(workstation)
contained are as follows:
Files Contents
----------- ------------------------------------------------------
LSL.COM Link Support Layer Module provided by Novell.
PCMODI.COM PCMCIA for DOS ODI driver.
NET.CFG Network configuration file specify settings for driver
, this provided by Novell.
IPXODI.COM IPX Protocol Stack Module provided by Novell.
NETX.EXE Netware workstation Shell Module provided by Novell.
VLM.EXE Virtual Loadable Module provided by Novell.
For more information about setting up NetWare Client networking
operating system, please see you "Novell NetWare client installation"
documentation.
***********************************
* Installation Procedures Steps *
***********************************
A. NOVELL NetWare installation
==============================
1. Create a subdirectory and install the following files:
LSL.COM
PCMODI.COM
IPXODI.COM
NETX.EXE
NET.CFG
The LSL.COM, NETX.EXE, and NETX.CFG files may be found on this
installation disk. The other files are included with your Novell
workstation software.
2. Edit the NET.CFG file and check that the INT number, the PORT
number and the network protocol type settings are suitable for your
network, and change any settings as necessary.
3. To connect to a server, execute the following commands:
LSL
PCMODI
IPXODI
NETX
F:\LOGIN {User Name}
:
:
Notice: For detailed information and other NetWare standard
keywords & parameters, please refer to NOVELL's manual
"NetWare ODI shell for DOS - NET.CFG options".
B. NOVELL NetWare Lite installation
===================================
1. Copy the \NETWARE\CLIENT\PCMODI.COM file from this diskette to the
"USER1 Driver Disk". (or the "USER2 Driver Disk")
2. Execute the INSTALL.EXE file from the "NETWARE Lite Installation
Disk".
3. Edit the NET.CFG file and check that the cable type and network
protocol type settings are suitable for your network, and change
any settings as necessary.
4. To connect to a server, execute the STARTNET.BAT batch file.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.