Installing the PCMCIA Ethernet Card driver Under WFW 3.11 ============================================ The NDIS driver for Windows for Workgroups 3.11 follows Microsoft's NDIS specification version 2.0.1 The PCMCIA Ethernet adapter device driver files for MS Windows for Workgroups contained in this directory are as follows: Files Contents ------------- ----------------------------------------------------- PCMND.DOS NDIS driver for WFW 3.11. OEMSETUP.INF Network information for installation. \DISK1 For OEMSETUP.INF. This driver diskette includes an OEMSETUP.INF file for WFW. Using the OEMSETUP.INF file, you can select the PCMCIA Ethernet adapter to be installed through the Windows dialog box menus. If you are installing Windows for Workgroups for the first time, we advise you to run the SETUP program with /I option (ignore hardware detection):SETUP/I. If you don't use the /I option, the computer may hang during installation. If this happens, reboot the machine, and run the SETUP program again. For more information about setting up Windows and the networking system, please see you MS Windows for Workgroups documentation. ********************************** * Installation Procedure Steps * ********************************** If you are first time installing WFW, when asked for the "Install New Network Adapter" menu, please go to following step 2 and answer questions. If you have already installed WFW, you can go to the "Network => Network Setup" menu and answer the following questions. 1. From within Windows of Network, run the "Network Setup" dialog box, Choose "Networks..." button. Choose "Driver..." button. Choose "Add Adapter..." button. 2. When asked for a network adapter to install, Select "Unlisted or Updated Network Adapter". 3. Insert this diskette into drive "A". 4. When asked for the path of UPDATED OR VENDOR-PROVIDED NETWORK DRIVER file, Type A:\NDIS2\WFW311 5. Select the "PCMCIA Ethernet Card" choice. 6. You need to specify IRQ and I/O settings, which must be equal to the /IRQ and /IO parameters specified to the enabler program. 7. Restart your computer so that the updates will take effect. Note: After WFW finishes the setup for the PCMCIA Ethernet Adapter, it will modify your CONFIG.SYS, AUTOEXEC.BAT and PROTOCOL.INI files.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.