1. Driver installation
2. AMOUSE Uninstallation
3. General Notes
4. Driver Features (for Windows 9x/NT only)
========= 1. DRIVER INSTALLATION =============================
*********************************************
* *
* 1. How to Install in Windows 95/98/NT? *
* *
*********************************************
For Windows 95/98/NT User:
Please read instruction on the diskette or
a) Turn off your computer.
b) Disconnect any previous pointing devices.
c) Find the port (usually in the back of the computer) where the mouse
cable of the new mouse fits; and plug it in.
d) Turn your computer on to start Windows OS.
e) If Windows 95/98 prompt you a "New Hardware Found", please choose
"Driver from disk provided by hardware manufacture" option.
(note:If you are unable to find the diskette, you
are allowed to choose "Windows default driver".
If you choose "Windows default driver" option,
the mouse is operated as a regular Microsoft compatible mouse
without any extended features. )
f) Insert diskette into your disk drive.
g) Press "Ctr-Esc" to open the "Start" menu, select "Run".
h) Type "A:\SETUP" and press Enter.(If the diskette fits in Drive B:, then
substitute "B:" for "A:".)
i) Follow the instructions that appear on the screen.
j) When the setup program is complete, please choose restart to finish
the installation. If your computer stops response at this point,
please safely shut down your computer, and restart your computer.
<Note: After upgrading your system to Windows 95, you might have
trouble with your mouse due to your non-plug-and-play system or
non-plug-and-play mouse or something else. If it is the case,
please go ahead and do the complete setup by following the above
instructions. In most case, the software will fix
the problem for you.>
************************************************
* *
* 2. How to Install in DOS ? *
* *
************************************************
For users who have DOS only.
1) Windows 9x INSTALLATION will install Mouse DOS Driver
automatically.
2) If you don't use Windows 95,please follow below steps:
Step 1:Insert the backup copy of your Mouse software diskette to
floppy drive A:.
Step 2:Under the C:\ prompt type:
C:\>A: <Enter>
A:\>instdos c:\amouse <Enter>
=========2. AMOUSE Uninstallation ===================================
The uninstall program will remove all AMOUSE driver files.
--- Uninstall AMOUSE from Windows NT3.5x ---
Step 1. Select AMOUSE group on Program Manager.
Step 2. Double Click on the Uninstall AMOUSE item.
--- Uninstall AMOUSE from Windows NT4.x /95/98---
Method 1:
Click on the Add/Remove Programs icon in the Windows NT/95/98 Control
Panel then select Uninstall AMOUSE and press the Remove
button.
Method 2:
Click Start button and select Programs. Then select AMOUSE and
double Click Uninstall AMOUSE .
--- Uninstall AMOUSE from dos ---
Support you install AMOUSE dos driver in c:\amouse.
Step1: Type cd c:\amouse <Enter>
Setp2: Type uinstdos <Enter>
====== 3. GENERAL NOTES ================================================
* Some applications are programmed in non-standard ways, which limits
their compatibility with other software, including AMOUSE.To avoid
headaches, some special AMOUSE functions have been disabled when
using applications known to cause problems.
* The AMOUSE is primarily a Windows product. It cannot provide the
Pan function in DOS due to the limitations of DOS. However, if you
are running DOS programs in a Windows environment you can still use
many of the special features as long as your DOS sessions are
windowed(i.e. not full screen).
* The Button Find feature does not always work. This is due to the use
of non-standard windows in some applications and is common to other
implementations of this feature.
====== 4. AMOUSE Software Features ======
Below driver features are added to the drivers for Windows 9x & Windows NT.
Button Assignments: lets you assign shortcuts to each mouse button. You can assign shortcuts to any mouse button except the primary button. You can choose the desired shortcuts from the Button Assignment drop-down lists, and click on OK.
Auto-Panning: When you choose the Auto-panning button function, you can move the mouse and the document will move in the direction you move the mouse.
Zoom/In(Out): When using this feature in Office 97, press the "Ctrl" key and the defined Zoom function button (the Zoom icon will appear), and you can enlarge (decrease) the window by moving the mouse forward (backward).
Cursor Enhancement: this option lets you control the size, color, and pointer of the cursor.
Double Click Speed: sets the speed at which the software registers a double-click.
To test the speed, double-click on the Test (sun) button. When the software registers a double-click, the Test button reverses the sun impression.
====== EasyJump for Windows ======
EasyJump lets you open eight special functions quickly.
Close AP
Close the application you are using.
Horizontal
Moves the cursor to the horizontal scroll bar.
Vertical
Moves the cursor to the vertical scroll bar.
Start
Activates the Windows Start menu.
Internet Access
This function opens Browser to access the Internet.
Help
This opens the Help menu.
Control Panel
Opens the AMOUSE control panel.
Auto-Panning
Move the mouse, and the document will move in the direction you move the mouse.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.