;;================= Example V90Wiz.INI ==== this file updated 3/10/98 ;; File for External Modems ;;========================= [General] FileCnt=5 ValidatorCnt=7 PostFlashCmdCnt=3 QuickCheckMode=1 BackupDone=1 BackupFile=C:\PACEV90\OrigBkup.S37 [Options] BlueScreen=1 OnePortOnly=0 ; faster testing if you set this to a modem port ForceBackup=1 ;if 1, user can't get past the wizard page without backing up firmware LogoBmp=PaceLogo.bmp OemAbout=For use with Pace 56 Voice Modems. OemAboutWebPage=World Wide Web Site: http://www.pacecom.co.uk OemAboutSupport=Tech Support Hotline: 01274 537031 OemWarn=Do not disturb your PC while this operation is in progress or you may render your modem unuseable!\n\nDo you want to continue? ShowAndWait=1 TimedShow=0 ShowIfItu=0 [Files] ;----------------------------------------------------------------------- ; filename, loadOrder, Flags, friendlyName[64], Description[256] ; Flags: LOADER or UNLOADER or FIRMWARE ; and: TRANS or FINAL or BKUP (BKUP is added added by program) ; ; be sure to set [General] FileCnt= ; leading spaces are stripped ; File01=XmUL003.s37, 1, LOADER, Firmware Loader, FlashLoader -- loads via XModem File02=XmDL003.s37, 1, UNLOADER, Firmware Unloader, Used to make Firmware backup via XModem File03=ITU_dsdd.hex, 2, FIRMWARE TRANS, Pace 56 Voice - V1.30, K56flex Firmware (supports AT-ITU?) File04=V90_dsdd.hex, 2, FIRMWARE FINAL, Pace 56 Voice - V2.00, ITU V.90 Firmware File05=OrigBkup.S37,2,FIRMWARE BKUP,Failsafe Backup, Firmware V1.200-K56_DLS-P1.03 - Saved 06/05/99 18:26:07 [Validators] ;----------------------------------------------------------------------- ; ATI3,op,Ati3Text,ugCode,Maker,Model,Remark ; op can be:=(equals), * (contains), ! (notContains), et.al. ; ugCode can be: UPDATABLE, TRANS, FINAL, or UNKNOWN ; ; leading spaces are stripped ; be sure to set [General] ValidatorCnt= ; Validator01=ATI3, =, ATI3, LOADFAULT, (Load Fault?), (Load Fault?), Maybe a modem in 'Load Fault' state Validator02=ATI3, *, V1.000-K56_DLS, UPDATABLE, PMC, Pace 56 Voice, Flex only, no ITU Validator03=ATI3, =, V1.200-K56_DLS-P1.00, UPDATABLE, PMC, Pace 56 Voice, Flex only, no ITU Validator04=ATI3, =, V1.200-K56_DLS-P1.01, UPDATABLE, PMC, Pace 56 Voice, Flex only, no ITU Validator05=ATI3, =, V1.200-K56_DLS-P1.02, UPDATABLE, PMC, Pace 56 Voice, Flex only, no ITU Validator06=ATI3, =, V1.200-K56_DLS-P1.03, TRANS, PMC, Pace 56 Voice, Been updated to Transitional Validator07=ATI3, =, V2.100-K56_DLS-P1.00, FINAL, PMC, Pace 56 Voice, Been updated to ITU v.90 [PostFlashCmds] ;----------------------------------------------------------------------- ; Cmd##=type,AT_Cmd_Text ; ugCode can be: BKUP, TRANS, or FINAL ; Commands send after a flashload. Usually start these with AT ; leading spaces are stripped, max len is 128 per command; max cmds: 10 ; be sure to set [General] PostFlasCmdCnt= ; Cmd01=BKUP,AT&F&W Cmd02=TRANS,AT&F&W Cmd03=FINAL,AT&F&W [Modem] PortNum=2 RevId=V1.200-K56_DLS-P1.03 Maker=PMC Model=Pace 56 Voice IsUpdatable=1 IsK56flex=1 IsITU=0 IsTransitional=1 ItuStatus=0Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.