PCI Fast Ethernet Adapter
NetWare DOS ODI Server Driver
for Netware 4.10 Installation Guide
=======================================================================
Installation Procedure:
-----------------------
Before you start with the installation process, make sure that
the Novell NetWare 386 V4.10 server is properly installed.
Similarly, your adapter should also be properly installed
in your workstation.
1. Insert the Driver Diskette into drive A:
and check the contents of subdirectory \NETWARE\SERVER.410.
It should contain the following files:
MXICSERV.LAN Ä Novell NetWare V4.10 Server Driver for
PCI Fast Ethernet Adapter.
MXICSERV.LDI Ä Novell NetWare Server Driver Installation
Information File.
AUTOEXEC.NCF
MSM.NLM
ETHERTSM.NLM
NBI.NLM
README.NLM
2. At the NetWare prompt (indicated by the Server name),
run the INSTALL.NLM program by typing:
server name: LOAD INSTALL <Enter>
3. Select "Driver options (Load/Unload/...)"
and press <Enter>.
4. Select "Configure network drivers", and then press <Enter>.
5. Select "Load a driver", and then press <Enter>.
6. Press the <Ins> key to specify other drivers to install.
7. Press <F3>, specify the driver path (A:\NETWARE\NW410),
and then press <Enter>.
8. The MXICSERV.LAN driver should appear in your choice list for
the 'Select a driver to install:' field. Choose this driver to
start the driver loading and binding procedure. This
will allow you to load and bind all 4 frame types supported
by NetWare.
9. To complete the process, follow the instrctions on the screen.
Installation notes:
-------------------
1. You had better add the followings in the STARTUP.NCF:
Set Reserved buffers below 16 meg 200
Set maximum Physical receive Packet Size = 1530
set minimum packet receive buffers = 150
2. You may specify the line speed and mode type you need in the AUTOEXEC.NCF file.
LOAD [c:]\<PATHNAME>\MXICSERV FRAME=ETHERNET_802.3 [Speed/Mode Type]
Speed/Duplex Types: 10HD ...... 10Mbps Half Duplex
10FD ...... 10Mbps Full Duplex
100HD ...... 100Mbps Half Duplex
100FD ...... 100Mbps Full Duplex
AUTOSENSE ...... Auto-Negotiation
Brand and product names are trademarks of their respective companies.
==End Of File==
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.